ActionScript 3.0 :: Interactive Map - Creating A Color Tween For Movieclips

Mar 3, 2010

I am currently working on a map of the US that is interactive. My goal is to be able to mouse over the states and have them turn red and then a window with contact information will open at your mouse when clicked. I am running into a few problems. I dont know the process for creating a color tween for my movieclips. my solution was to make a copy of the states, color them red and place them behind the gray ones and attatch an event listener to all the states that lowers their alpha when moused over. thats not really the problem though. for my code that i have used to call in the window is as follows. I will use texas as an example.

[Code]...

View 5 Replies


Similar Posts:


ActionScript 3.0 :: Creating Interactive Menu - Transition Tween

Dec 10, 2011

I'm new to Actionscript 3.0 and I want to create an interactive menu. On the left as I hover over the button "products" I want a sub menu to come into view (as seen in the graphic below). I've created all the graphics but there are a lot of translation issues.

Here is the code I've used:
import fl.transitions.Tween;
import fl.transitions.easing.*;
var startY:Number = productsSub_mc._DisplayObject.y;
var myTween:Tween;
var myTween2:Tween;
[Code] .....

"productsSub_mc" is the sub menu I created as a movie clip. Within that movie clip is another button labeled "videos". When I run the preview, I get the following error:
1084: Syntax error: expecting rightparen before semicolon.

View 9 Replies

ActionScript 2.0 :: Interactive Coloring Book - Large Blank Box At The Top Of The Color Pallet Isnt Changing Color?

Apr 27, 2009

i have been doing this tutorial http:[url]..but i am stuck on PART 8, i have done everything the tutorial has said so far (although my image and the colors used are different) but the large blank box at the top of the color pallet isnt changing color when i click on any color from the pallet.

Also this tutorial doesnt say what version of flash and actionscript is best suited for this.Currently i am using CS4 & Action Script 2.0 but i don't know if this is correct. below there is a link to the fla. file that Coloring_Book.fla.

View 1 Replies

ActionScript 2.0 :: Changing Lots Of Movieclips Color And Border Color Separately?

Dec 23, 2008

I am in the making of a isometric level editor, and I have about 15 movie clips with more to come. I want to let people change the color of tiles to what they want from a list of colors, so how can I let them change the color of a tile dinamicly with actionscript so that it changes a tile's color while preserving changes of "shadows"? I mean I have let's say a cube and to make it look 3D I need to change each face to make a feeling of 3D and not a flat one.

View 1 Replies

Picture Motion Tween With Interactive Movement

Dec 25, 2009

I use adobe production premium CS3. I made the movie(attached), just picture motion tween. As you see, that pictures in my movie just roll and roll. But, I would like to some interactive move in my movie like "when the mouse clic > picture move".
Attachments: turnwith_blur.fla.zip (40.3 K)

View 1 Replies

ActionScript 2.0 :: Four MovieClips - Interactive Two Or More Buttons

Jan 14, 2009

I have four movie clips on stage, I change those to buttons with onRelease script. Each movie clips have 2 frames ON and OFF when I click one of them, active other movie clip normally but my buttons don't work well. I want when I click one of them this button go to frame 2 and stop and other buttons go to frame 1 and stop.

View 3 Replies

ActionScript 3.0 :: Creating Interactive Files With More Than One URL

Apr 22, 2009

I want to create more than one button instance that go to different URL address's. From the Adobe Video Workshop, I got the code:

[Code]....

I get 1021 duplicate function error. I think I understand in priciple what's wrong but don't know how to fix it. MyI knowledge of Action Script 3 is zero. What I need is sample code that works that I could copy and paste, with appropriate changes.

View 4 Replies

Professional :: Creating Dynamic And Interactive Animation?

Jan 22, 2011

I need to create flash interactive animation for one one of my regular clients, which should look and work similar to example in Nike store Customize:LinkThis is how my clients product (shirt) should look like and what sections should be editable: [URL]Basically it should work this way:1. End user chooses some element of shirt which he would like to edit (for example collar)2. When he clicks on that element, popup windows shows offering two main options: to change color and graphic (texture or pattern), same as on nike store customize example3. After user changes one section (collar) he goes to other section (lets say sleeve) and so on4.

User should be able to zoom in or zoom out that shirt and also if it is possible to rotate it in 4-5 positions5. At the end it should be able to save that work (and load it if he wants to later ) and be able to print it.I have made many animations, games, banners and similar using Macromedia Flash MX and Adobe Flash so I am not a flash newbie but this is a first time I am dealing with this type of work. I know that there is no step by step tutorial for this kind of custom interactive animation but I need some help and and advice how to create these three first steps (1. 2. 3). Regarding steps (4.) and (5.) I think I could realize it (zoom in, zoom out, rotate movieclip, save in database and print screen), because I ahd some previous experince regarding this part.

View 22 Replies

Silverlight :: Tools For Creating Interactive Chart?

Apr 14, 2011

I am creating a project which involves the visualisation of signals and timeline, so I am looking for a charting program which allows me to zoom in and zoom out and with additional functionality e.g. drag and drop or highlight the area.

I have no preference whether it should be WinForms or Web apps, and I am fine to program in either Flash or Silverlight. So I would like to see if you guys can recommend some tools for use.

View 2 Replies

Flex :: Creating Interactive Charts In Flash?

Sep 6, 2011

I'm looking to display some data in the form of charts (line graphs, pie charts etc). I also require them to have a certain amount of interactivity (pan, zoom etc.).

For these requirements, will Adobe Flex be enough for me, or would I need to use flash?

A little research told me that building charts in Flex is easy, but can they be made interactive without using Flash?

View 3 Replies

ActionScript 3.0 :: Creating Interactive Website Tutorials

Aug 14, 2009

I am a member of a clan on a popular gaming website. I'd like to make fully interactive flash videos detailing certain game concepts. Is it possible to do this with screenshots (there are some drop down menus) or would I have to remodel the website in Flash?Basically, I'd like to know how to make it so I can tell the user to click a certain link and take a certain step, we've all seen those types of interactive tutorials.

View 0 Replies

Creating Interactive Map On Surf Webcam Site?

Jun 21, 2009

I have a website which i have built and work on alot, and i would like to create a sort of interactive map (the site is a surf webcam site, and i would love this map to be of the uk, and when you click on certain areas, it zooms in in a sort of google earth type thing, then showing locations of my cameras which the users can click to go to the correct page.) Now I did make something like this ( without the spinny stuff) using jquery and hiding divs etc, but I think to get the best effect would be to make some sort of flash applet. Now I am a complete begineer with flash.

View 1 Replies

ActionScript 2.0 :: Creating An Interactive Display Map For A Client?

Oct 6, 2004

I've been working creating an interactive display map for a client. I've figured out the controls I'd like to use for moving the map, but I'm having trouble with the zooming features.

What I'd like to do is have the user click on the "+" button to zoom in and the "-" button to zoom out. The problem is the map is not centered when the user clicks either button?

Any ideas how I can fix this, or improve it?

View 3 Replies

ActionScript 2.0 :: [Flash CS3] Creating An Interactive Slideshow?

Feb 7, 2008

What I try to make in Flash is some kind of interactive slideshow, with .swf files instead of static images. I want to have kind of control pannel with buttons numbered from 1 to n, always visible at the front layer. In the background, there will be swf files that change, for example, every 30 seconds. And each change consists of fade in and fade out effect of the swf container (and so the loaded swf file itself). During the swf changes, the buttons should change too by switching their states from 0 to 1 and so on. User should be able to skip to any frame he wants by clicking the corresponding button.This is the code I already have:

Code:
// Preparation
button1_mc.framenumber_txt.text = "1";

[code].....

View 1 Replies

ActionScript 2.0 :: Creating An Interactive Photogallery For School?

Aug 28, 2009

For the last couple of weeks, i've been trying to develope an interactive yearbook for my school. Im using an external XML, and trying to push all the data in the xml to assigned arrays. Also im trying to use a for loop to create empty movie clips. This empty clips will serve as "pages" if the total number of students is greater than 25. Also, on these pages im trying to attachMovie to a specific x, and Y, as you'll see in my source code.

Other than that, i can not figure out where im going wrong.When i first try to publish it, it gives me an error saying that the path is undefined, and will not load ANYTHING. if i make a few changes, it just sits there blanky.

[Code]...

View 1 Replies

ActionScript 2.0 :: MovieClips - Implementing Interactive Photomontage Section

May 21, 2007

I have a minor problem implementing an interactive photomontage section to my site. By that I mean lots of images which can be dragged about by the user to create one larger whole image. Like this (but much simpler, only 12 or so images on the stage): [URL]. So I'm putting the images inside a movieclip as I can use the startDrag and stopDrag actionscript commands so the user can drag the images around.

Here's the code I'm using on each movieclip image:
on (press) {
startDrag(this);
} on (release) {
stopDrag();
}

The problem I have is that I have two photomontages (2 set of images). The user clicks on a thumbnail in the lower right corner to select which one. Each button fades in the appropriate images, and fades out the other set - this is fine. The problem is that obviously the set of images on the highest layer (the Abbey set) are still on the stage but are just faded out (by movieclip tween alpha), so they conflict with the Statue set. Ie. when you try and click and drag an image in the Statue set, you can't get hold of them as you are really dragging the invisible Abbey set around still. I've attached a FLA file which demonstrates this problem. Click on 'BTN1' or 'BTN2' to change the set of images. The Abbey one works fine, but when trying to drag the statue one, the Abbey one if hidden on top will cause problems.

Here's what the section looks like in my project (thumbnails to select which):
Abbey images:
Statue images:

I've tried wrapping the startDrag commands inside an if statement that held a true or false, then put true or false in the appropriate places inside each image movieclip to represent when it is visible or not. I thought this would work, but it doesn't. I also tried putting the set of images at slightly different points in the main timeline, so they were never on top of each other, and then jumping to that point in the timeline when selecting the thumbnails. This kind of worked, but weirdly I had to click twice on the Statue set for them to show (fade in).

View 4 Replies

Professional :: Creating Interactive Floor Plans In Flash CS4 Possible?

Apr 29, 2010

Is it possible to create interactive floor plans in flash CS4? Are there any tutorials out there to do this?

View 1 Replies

ActionScript 3.0 :: Creating Interactive Panoramic Photo With Mouseover

May 15, 2011

I want to make an interactive panoramic photo with mouse over.

View 4 Replies

ActionScript 2.0 :: Creating Fluid Interactive Animations Of Buttons?

Oct 6, 2005

can walk me through something like what this site has for its interactive menu? I don't even know what that kind of interaction is called, so I don't know what to search for.

View 3 Replies

ActionScript 3.0 :: Flash - Creating Dynamic And Interactive Animation

Jan 24, 2011

I need to create flash interactive animation for one one of my regular clients, which should look and work similar to example bellow: Link This is how my clients product (shirt) should look like and what sections should be editable: [URL] Basically it should work this way:

1. End user chooses some element of shirt which he would like to edit (for example collar)

2. When he clicks on that element, popup windows shows offering two main options: to change color and graphic (texture or pattern), same as on nike store customize example

3. After user changes one section (collar) he goes to other section (lets say sleeve) and so on

4. User should be able to zoom in or zoom out that shirt and also if it is possible to rotate it in 4-5 positions

5. At the end it should be able to save that work (and load it if he wants to later ) and be able to print it.

I have made many animations, games, banners and similar using Macromedia Flash MX and Adobe Flash so I am not a flash newbie but this is a first time I am dealing with this type of work.I know that there is no step by step tutorial for this kind of custom interactive animation. how to create these three first steps (1. 2. 3). Regarding steps (4.) and (5.) I think I could realize it (zoom in, zoom out, rotate movieclip, save in database and print screen), because I had some previous experience regarding this part.

View 3 Replies

ActionScript 3.0 :: Calling MovieClips Function For Interactive Video Game?

Mar 13, 2010

i'm Currently creating an interactive video game. There are 66 movies. I'm new to AS3, and have little experience in AS2.

The game in short:
You choose from 5 ingredients, each has this product provides a number of calories:Rice R = <- for all standard!

[code].....

View 6 Replies

ActionScript 3.0 :: Calling MovieClips Function For Interactive Video Game

Mar 13, 2010

I'm Currently creating an interactive video game. There are 66 movies. I'm new to AS3 and have a little experience with AS2. I will try to explain the game! You choose from 5 ingredients, each has this product provides a number of calories:

Rice R = <- standard value!
Mais =-C
Roots =-W
Tofu =-T
Onions =-U
Champions =-M
Each ingredient can be added only 1 once.

Good combinations:
R-U-T-CR-U-C-TR-T-U-CR-T-U-CR-C-U-TR-C-T-U
Each movie is in a movie clip. And the frame where the movieclip is on, is labeled with the combination. For this I wrote the following script:

ActionScript 3 Code:
stop ();
var caloriesVar: Number = 10, / / default Rice
var inpanVar: String = "R", / / R = Rice
iLabel.info_txt.text = (caloriesVar);
iLabel.info_txt2.text = (inpanVar) / / idem
[Code] .....

But this does not work. When you click a button, the script doesn't do anything. Do not know where it goes wrong because he does not update the text fields.

View 2 Replies

Actionscript 3 :: Click - Creating An Interactive Animation Of A Cat Can Stroke - Rub - Poke

Oct 28, 2010

I am creating an interactive animation of a cat you can stroke, rub, poke etc. I have implemented some basic functions in an attempt to recognize the different gestures, I am using the mouse down and mouse up events to track the duration and distance of the click.

My problem with this is that the 'distance' is measured from the start point and end point of the click, so if it ends near where it started you won't be able to tell how many times the click has 'rubbed' back and forth. Is there anyway to track the distance based on the full path of the click?

[Code]...

View 2 Replies

ActionScript 3.0 :: Creating A Large Grid Matrix Of Interactive Objects?

Nov 7, 2009

I am working on a project where I need an interactive matrix of 500x500 clickable lements. I thought this would be an easy task in actionscript3 but boy was I wrong. was able to create a matrix where each element was a Sprite object with attached Mouse click event. But here the performance problems begin. FlashPlayer10 can handle up to 100x100 matrix, but when I increase my matrix I start getting script timeout in browser player... Here is how my "unfinished" matrix looks like.

So how should I approach this problem? I was hoping flash will be able to handle so many elements, but I guess I was wrong. I want to have a pan control to pan around for objects off screen and of course zoom in/out control.It's true I'm not very professional in Flahs and actionscript but a friend who is told me this would be no problem implementing in AS3? I need this in flash as the thing needs to be hosted on website (unless there is a better tool for doing something like this...).

View 12 Replies

ActionScript 2.0 :: Tween Color On Rollover?

Feb 17, 2007

I'm using some code that tweens menu text color on rollover. This basic code works, but I'd like to tighten things up and create a single function that is called on rollover and rollout. The code that needs help is below - create a dynamic textfield and convert it to a movie clip called "textfield_mc".

Code:
var default_color:Number = 0x939672;
var rollover_color:Number = 0xc6c3ab;
var selected_color:Number = 0x63481d;

[Code]....

View 3 Replies

ActionScript 2.0 :: Makes One Color Tween To Another?

Feb 6, 2008

i have a red colored box, and i want it to gradually tween into being green.. is that possible only using actionscript?

View 1 Replies

ActionScript 2.0 :: Tween Color And _x At The Same Time?

Jun 4, 2008

How can i tween color and _x at the same time??

Code:
function over() {
TweenFilterLite.to(this, 0.2, {_x:this._x+5, ease:Bounce.easeOut, overwrite: false});
TweenFilterLite.to(this, 0.3, {colorMatrixFilter:{colorize:0xFF0000, amount:1 }});
}

View 2 Replies

ActionScript 3.0 :: Tween The Color Of An Object With Tweener?

Oct 21, 2009

does anyone know how to tween the color of an object with tweener can you. I want to tween from #C1BB00 to #FFFFFF

View 1 Replies

ActionScript 3.0 :: Tween The Color Of An Existing Shape?

Sep 6, 2010

Is there anyway to tween the color of an existing shape?

View 1 Replies

ActionScript 2.0 :: [fmx] Tween Halts When Color Changed

Jan 14, 2004

I have a graphic (behaving as a movie) that has a motion tween. Color selector buttons let the user change the color (using setTransform) of this moving image.

BUT... as soon as one clicks a button to change the color, it stops moving (eveything else carries on moving though).

A good example of what happens is: picture a red car moving across the screen. A potencial buyer wants to see what the car will look like in yellow and as soon as they click the yellow button, the body work of the car becomes yellow and stops dead. The rest of the car carries on. Buyer not impressed and I loose the sale!

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved