ActionScript 3.0 :: Loading Images Into A New Movie Clip From Another Site?
Jul 2, 2010
and then having teh code create a new movie clip for every image there is..
Pretty much its a store that have a bunch of galleries.. Picasa and such. like 20 different pages easy with 20 albums on each with like 100 pictures in each album.. Now I need to get a code that goes to these sites takes teh pictures and then puts them in an empty MC and loads the picture in it And creates an empty movie clip for every picture after that untill there is more more pictures.. The site is also updated on a regular, And I'm trying to avoid having to update it myself. Since the site will remain the same.. cant I jsut have a code where you do the samething over and over again. Until there is more more pictures to load.. and then is stops.
[URL]
Thats one of the pages.. So I would need to site i'm building to go on this url take teh pictures off of it and then place them in empty movie clips I made to rebuild the gallery. And if even there are more pictures than there are MC, It will make new ones to accomedate those picturs.
View 1 Replies
Similar Posts:
May 2, 2006
i'm loading dynamically some images in a movie clip (banner in [URL].. everything works fine in safari, netscape, firefox (of course).. Explorer KO! actually IE (6.0.2900) works, IE (6.0.2600) doesn't!! image is loaded (preloader is working correctly), but image is not visible!!
View 3 Replies
Feb 21, 2009
I am trying to do something that seems like it should be relatively easy. Well bang goes that theory. Here is what I am trying to do. I have the path to a group of images stored in an xml file. I want to load them to a movie clip on the stage. doing this directly by reading the xml file and using loadMovie("filename"); bsaically does what I want it to do with just a few problems, 1. the movie repeats so the same image is pulled from the server multiple times sucking up bandwidth. 2. On slow connections the images can sometimes load slow making the movie not display properly. What I would like to do is load all the images into some structure and add the images to the movieclip in the time line when needed. How does one accomplish this in action script 2.0?
In a perfect world, I would just load all the images to an array and load the array element to the movieclip on the stage.
View 1 Replies
Jul 20, 2009
I am loading images into a movie clip consecutively - the code has flash read through the XML nodes one by one and load in the images one after the other. I need flash to recognize when all the images have been loaded, and at that stage I want it to tween the movieClip containing the images. I have it all working, except I am getting this weird glitch where the movie clip jerks from left to right while the image are loading (at least i think its when the images are loading!) - it then settles down and runs normally. the code is below, so can see what i mean by 'jerks from left to right' if you check out the site: [URL]
[Code]....
View 1 Replies
Aug 30, 2010
I just uploaded my exported swf to the site for the first time and it's running the movie but, either not reading the xml file or reading the xml and not loading the images.
View 1 Replies
Feb 18, 2009
I've been trying to load a movie clip from a movie clip that has been loaded. I am trying to provide a simple means to change the look / feel of the flash application by placing the graphics and controls into a second swf. Each different screen is represented by a different movie clip that is in the second swf. So I've got app.swf loading ui.swf. I want to load screen1_mc from ui.swf.
The app.swf is loaded by a master swf. There may be multiple copies of the app.swf that can be loaded by the master.swf and each app.swf could be configured differently. For each "unique" app.swf it is stored under a unique folder that is not known to me in advance. Since I don't know the unique folder in advance, I can't use import / export for runtime sharing. Is there any way to load the movie clips from the loaded movie clip? (Basically, I want to treat the ui.swf as an extension to the library.)
View 0 Replies
Oct 30, 2009
i have movie clip x (which is blank), and movie clip y, but movie clip is only on the timeline
how do i play movie clip y in movie clip x ??
View 1 Replies
Mar 16, 2005
I'm working on a flash site and I'm having some trouble with the programming for it. I'm not so great at action script, so I'm hoping that my troubles are caused by my own stupidity and that some cool smart person will have an answer for me.
So, I have a main menu flash file that functions like the one in this tutorial:
http://www.kirupa.com/developer/mx/p...transition.htm I set it to load various swf files and it's works just fine. What I want to do is have it load a swf that functions exactly the same (buttons that load external clips with transitions) as the main swf- this is a sub page menu. So, in theory, the sub menu page should load the final content, and three swfs would be seen stacked ontop of each other.
I changed the instance names in the sub menu file to be different than that in the main menu file. This fixed the original problem of it loading the content clip into the clip that the sub menu should stay in. Now, It loads the sub menu just fine, but then it gets stuck and never loads the content. The sub menu buttons will not function at all. Independent of the main menu, the sub menu file works perfectly What can I do??? Does it have anything to do with the "_root"? I never understood the concept, so I'm having trouble with it.
View 5 Replies
Nov 16, 2003
I have a button when I click on it it is suppose to load an external swf into a empty movie clip. But everytime I clicked it, it juz loops the whole flash animation of this very whole flash the button is currently in which it should actually load the external swf to the empty MC. I can't attack my file here since it is too big.
View 1 Replies
Dec 10, 2009
Flash CS4/Actionscript 3 I am trying to create a section for a site where mousing over a button will play a certain frame of a movie clip, which is sitting next to the button. Mousing over different buttons will play (and stop) different frames in the movie clip.
View 1 Replies
Mar 11, 2010
I was wondering about the flexability of loading movies into a movie clip. Currently, I am well able to load one movie into a movie "loader" clip, but thought maybe there is a way to load additional movie clips into that same "loader" clip, as i am starting to accumulate several different graphics that i need to have be inside movie clips so that i can make them change colors on the same frame when needed.
i shot from the hip and tried this code, but didnt have any luck:
mc_LCD_loader.attachMovie("hilight", "g", 1), ("header", "X", 1); mc_LCD_loader.g._x = 0; mc_LCD_loader.g._y = 1000;
mc_LCD_loader.X._x = 0; mc_LCD_loader.X._y = 1000;
[Code]....
View 9 Replies
Jul 2, 2006
I would like to set height after I load an external movie into a movie clip.
For example,
this.body_mc.loadMovie("body_about.swf");
_root._height = this.body_mc._height;
I always get height as 0, because body_mc is an empty movieClip.
how to access the body_about.swf height as soon as loaded the movie into the empty movie clip?
View 2 Replies
Jan 31, 2010
When I try to import several images (from a folder on disk), I cant seem to make a movie clip of them. What do I have to do to import a bunch of images and then test the movie and see each image appearing after one another?
View 1 Replies
Jul 14, 2009
I have a problem trying to unload some images from a movie clip ,What i have is a movie clip called " thumbnails" on the stage which loads some images from an array . the movieclip "thumbnails" , holds at the begining the first 4 images , then i have a button called "next_btn" which loads the next 4 images .basically when the next_btn is click it is loading the next 4 images which place them on top of the first ones , and is fine , but what i need to do is to clear the movie clip before loads the next images into.i have tried the unloadMovie method and it is not working , place the code below if anyone has any ideeas what i'm doing wrong ( actionscrip2 )
Code:
function LoadImages(startNo,end)
{
//thumbLoader.removeMovieClip();
//thumbLoader.unloadMovie(thumbnails);
// thumbnails.unloadMovie();
[code]....
was trying all 3 commented options from above , and none of them does what i want the first 2 are removing only the last image from the movieclip and the last one removes the all movieclip and is not loading anything else after
View 1 Replies
Nov 18, 2009
.I've downloaded a template, which I'm modifying to get working the way I want. You can see how far I've got by going to URL... My question is regarding the 'About' page, where on the right hand side you'll see a pull down menu, with two images on it. The first (says Myrtletown Films) loads and links correctly - The second doesn't link correctly.I'm almost certain its a coding linking issue - As if I were to load the same movieclip as the first one (only telling it to load image2, it loads fine - but then wont link to a separate location).Ok, its starting to get confusing; so here's the FLA. When you open the FLA don't go looking around for bits and pieces. Everything you need will be in the 'action_ content' movie clip. You will find both instances of the images (which are labelled 'Previous_Work_Item_1a' etc)[code]The first image is linked to page '6', the second image (which is failing to load) is linked to page '7'. What's confusing is that Previous_Work_Item2a/b/c are just duplicates of Previous_Work_Item_1a/b/c
View 8 Replies
Feb 18, 2010
I am rearranging a flash by adding more picture. By default it was 8 pictures but I want to add unlimited number of pictures on XML file and want to load them in Flash. The XML file is parsed into an array (code provded below). I can not figure out the problem as the flash shows only the default 8
pictures, not showing the additional pictures that i have added. I was hoping someone here can help me in taking the parsed XML file and help me load the image
into the movie clip. Also I want to redirect all the Rotate Picture (3d-carousel-menu) links to the Flash
picture showing state. I mean all the carousel-menu links will be linked to image showing stage.[code]...
View 0 Replies
Oct 1, 2010
how could I use the date to swap out a movie clip or image stored in the library?
View 2 Replies
Jan 23, 2012
I don't know if this is possible but if someone knows how to do iI want to load images into a movie clip but using a html tag?What I'm trying to achieve is loading a xbox avatar into flash...The code I have to use is :<img src = "http://avatar.xboxlive.com/avatar/gamertaghere/avatar-body.png" />
View 4 Replies
Nov 20, 2009
I want to build a nested movie clip which has 5-6 .jpg files which I want to load externally and then dissolve them at the transition time. So eventually I would also be having a timer to start the playback. I do not know how to get it going...... Just want the images to load through a loader, dissolve between them, timer to start the playback and at the end the movie goes back to the main time line. Just let me know where is the starting point for me and how do I address this issue.
View 5 Replies
Feb 14, 2010
I have a movie clip which is having dynamically loaded image. I want to preload it. how do i make a preloader for a movie clip.I used loader component for preloading images. And its work fine. But I have various images which are loading in a single movie clip when user clicks on a particular button.so i want to develop a preloader for a movie clip. And my client also doesn't want that simple look of a loader component. That's why i will can use any free preloader. But how to assign it to a movie clip which is having dynamically loaded images.
View 5 Replies
May 10, 2006
i have a movie in which i have 50 thumbnails dynamically added to a mc and i have a scroller to scroll the mc which works fine.. on each thumb i have a rollover image (which is a bigger image of the thumb) which works fine but i want the rollover image to be shown within the area of mask area which is not happening now..
View 4 Replies
Jan 18, 2007
problem was that when I added a Dynamic text box with a UIScrollBar, my images wouldn't load into my empty movie clip (there's a progressBar too).I hadn't named the UIScrollBar. It still scrolled the text as it should, but apparently since it wasn't named it was fooking with my other components and thereby with my image loaders.
View 2 Replies
Apr 12, 2007
I have 5 different MovieClips in the library, and a main movieclip on stage.
I must load the MCS from the library randonly on the main MC from time to time. How can I do it?
View 1 Replies
Apr 15, 2010
[code]How do i do that Load a movie clip at the same time it stays on the same frame after the movieclip plays.. It returns to the last frame?
View 1 Replies
Jun 2, 2011
I'm having an issue with placing images loaded from an XML file in placeholders within movie clip instances on the stage. It'll load an image onto stage, but only one image. I'm kinda at a loss at the moment.
Code:
import com.greensock.TweenLite;
import com.greensock.easing.Back;
import com.greensock.loading.*;
import com.greensock.loading.display.*;
import com.greensock.events.LoaderEvent;
[Code] .....
View 6 Replies
Jun 4, 2009
I made a basic slideshow that loads and plays photos with comments from an xml file. I've just uploaded some new photo's and edited the xml to include them but now flash stops while loading the series of photo's and just stalls. Removing the files from the xml does not work either and now I have no movie. Tried various was of uploading etc and nothing works, the movie runs fine in testing locally. It's extremly anoying as it was designed to be very simple to update with new images via the xml.
[Code]....
View 10 Replies
Jul 26, 2007
I have a problem in loading pictures to duplicated movie clips. I have a dynamic sliding menu and I wanna load images to submenus. However I havent succeeded yet.
Here is the code:
setProperty("Rub", _visible, false);
setProperty("subrub", _visible, 0);
bas._visible=false
[Code].....
View 3 Replies
Dec 22, 2010
I am trying to load an external swf slideshow that uses xml to load images, but the images wont show...if I look at the stand alone swf file they show up fine...Is it a matter of xml image path? why I cant show the images when the slideshow swf is loaded into my main swf?
View 2 Replies
Aug 10, 2005
I am trying to create a slider that will move a series of images in a movie clip based on the location of the slider. The problem I have is that when you click and drag the scroller it will move the images once but after that the images will not move. I am guessing that the problem is with my code. I want to move the _x of the images movie clip based on the _x of the slider. Here is the code I am using which is placed in frame one of the "timelineSlider" MC:
[Code]...
If it will help I can send the the original .FLA file by email as it is too large (225kb) to post on the forum.
View 3 Replies
Oct 25, 2006
I'm trying to dynamically load multiple images to a Movie Clip on the stage. Where I am having trouble, is when I position different sized images one under another.
What I have done is, assign a variable for the position for the _y of the next image. eg. var spacing:Number = 0;
Since I'm loading the images from a XML file, I've included the height for each image aswell. This is where I am having trouble
eg. spacing += myxml.childNodes[i].childNodes; OR
spacing = spacing + myxml.childNodes[i].childNodes;
trace(spacing);
Say for example, the image I am loading is 400px high, 'spacing' then appears to be 0400 and not 400. After I load the second image, which is 500px high, spacing appears to be 0400500 and not 900.
View 2 Replies