I'm having an issue with placing images loaded from an XML file in placeholders within movie clip instances on the stage. It'll load an image onto stage, but only one image. I'm kinda at a loss at the moment.
Code:
import com.greensock.TweenLite;
import com.greensock.easing.Back;
import com.greensock.loading.*;
import com.greensock.loading.display.*;
import com.greensock.events.LoaderEvent;
[Code] .....
I have a problem in loading pictures to duplicated movie clips. I have a dynamic sliding menu and I wanna load images to submenus. However I havent succeeded yet.
Here is the code:
setProperty("Rub", _visible, false);
setProperty("subrub", _visible, 0);
bas._visible=false
[Code].....
i am loading JPG images into movie clips, then drawing a border around them with this code:
Code:
var frameColor:Number = 0xffffff;
var lineThick:Number = 1;[code]..............
i am resizing the movieclips (and thus the contained pictures) down to 160 x 120, but those pixel values didn't work in my lineTo statements. i multiplied them by 3, using 480 and 360 and it works better. however, the behavior isn't consistent. i am attaching a picture so you can see how the border is too tall on some of the images.so, is there a better way to use pixel dimensions with lineTo? does the scaling factor between flash vector units and pixels change between movieclips depending on what content i load into the movie clip?
I have a banner that I've created and i'm trying to dynamically load in an image so that I can display it on the banner. However I'm having a very difficult time with it. I've found tutorials explaining how to load an image into flash and show it on the display but they are all creating an instance where as I have instances of the MC already set in tweens and on the stage.I tried attempting code such as:
Code:
this.Img_holder_mc.Load("myImage.jpg");
but this isn't working.
[code]........
I'm dynamically loading images from a JSON feed into individual movie clips and then adding the clips to the stage(both by addChild)--basically creating thumb tiles. I've added a click handler to do something when the MC is clicked. WHAT'S MY PROBLEM: The problem I have is that the MC is clickable, but the content is not. For instance, the clip has a white box in it, and the loaded image is made slightly smaller and centered to give a white border around the pic. An empty clip loaded to the stage works fine, and the white border around the image is clickable, but the image is not.
View 1 RepliesI am trying to do something that seems like it should be relatively easy. Well bang goes that theory. Here is what I am trying to do. I have the path to a group of images stored in an xml file. I want to load them to a movie clip on the stage. doing this directly by reading the xml file and using loadMovie("filename"); bsaically does what I want it to do with just a few problems, 1. the movie repeats so the same image is pulled from the server multiple times sucking up bandwidth. 2. On slow connections the images can sometimes load slow making the movie not display properly. What I would like to do is load all the images into some structure and add the images to the movieclip in the time line when needed. How does one accomplish this in action script 2.0?
In a perfect world, I would just load all the images to an array and load the array element to the movieclip on the stage.
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 Repliesi know there been a lot of poasts on this but none of them. I am duplicating a movie clip called "thumb" on my main timeline. they are named by number (1 to 233) within each clip i would like to load an image
[Code]...
the reason i have put in 10.jpg is just to get it loading one image into all clips. But its not loading the image into any. the trace is bringin back each MC's name fine when i remove the if(_name != "thumb"){ it loads the image into the duplicated original MC so im completely confused. this is the duplication script on the first frame of my Main timeline
[Code]...
I have some (Eg. 10) Movie Clips on bottom of the Stage (aligned horizontally) with different sizes (different width & height). I want them to align vertically on middle of the stage with same gap (irrespective of their sizes) in between 2 Movie Clips. Is it possible using AS3 code?
View 3 RepliesI was wondering about the flexability of loading movies into a movie clip. Currently, I am well able to load one movie into a movie "loader" clip, but thought maybe there is a way to load additional movie clips into that same "loader" clip, as i am starting to accumulate several different graphics that i need to have be inside movie clips so that i can make them change colors on the same frame when needed.
i shot from the hip and tried this code, but didnt have any luck:
mc_LCD_loader.attachMovie("hilight", "g", 1), ("header", "X", 1); mc_LCD_loader.g._x = 0; mc_LCD_loader.g._y = 1000;
mc_LCD_loader.X._x = 0; mc_LCD_loader.X._y = 1000;
[Code]....
I have a movieclip, does some animations etc.
Is it possible to view that movieclip at the last frame on the stage, so that i can then line up items in another movieclip with it?
Driving me nuts trying to get the pixels perfectly lined from two different clips
I am designing a website and have for locations I would like to load a random image from the same folder. Goals we'd like to accomplish with this:
1. We want images to load randomly from same folder
2. We don't want any duplicate images on the page at any one time
3. We have different size movie clips they are loading into.
Is there a way to accomplish this? What script do I use to resize the .jpg to fit whatever movieclip it's loading into and how to I tell it not to load an image that is already loaded in another movieclip?
You can manually save some particular movie clip on a stage as an image by running "Export > Export Image". Is it possible to write an actionscript that would export all movie clips on a stage to images automatically? Or at least is there a way to automate this in any way?
View 3 RepliesSuppose I've got 2 movie clips on the stage. box_mc and triangle_mc. I want to set up a way so that whenever I trigger the event, such as pressing a key (like
if(Key.isDown(Key.SPACE)){
//stuff that activates it
}
[Code]...
if I push the Space key again, it would start from the top (1) and repeat the sequence. The sequence would otherwise stop at 4. Previously I've been using counters inside an onEnterFrame such as counter = counter +1; if counter > n, counter = n; etc. This seems tedious and I'm hoping there's a better way to do this. I do not understand watch and timer functions of actionscript (they never seem to work for whatever project I'm occupied with).
I have used Flash on and off over the years but I've decided to hunker down and learn it in earnest. We have cs4 at work and I am having this problem.I checked out the differences between a graphic symbol and a movie clip, and it seems that the movie clip has some distinct advantages. But the main disadvantage is not being able to see what happens on the stage as it plays. How can I get around this limitation? Why does it even exist in the first place? I understand that scripting can complicate how it plays, but for example if I am making a straightforward animation, but parts of it depend on other parts that are in separate symbols, how can I see what is going on at a specific frame on the stage overall?
View 3 RepliesIf I create a 2000 frame Movie Clip and then drag it onto the stage of my main scene... shouldn't it work/play through it's entirety from within one frame of the main scene timeline? IOW I'm having to make the layer on the scene stage that i drag the movie clip onto 2000 frames long in order to see the nested 2000 frame movie clip play.Seems like in the past I could get Movie Clips to play and loop and what not from the main scene/stage without doing this.
View 12 RepliesUsing an XML file, I am pulling a series of JPG images from my hard drive onto the stage. Each of these images will need to have different mouse events placed on them that will take the user to another part of the movie, or perhaps to a different scene.
The attached code successfully pulls the images to the stage -- as JPG images -- and spaces them. What i need to do is make each of them a
button or movie clip, each with a specific action (information which can be gleaned from the XML).
Eventually, I'll need to show images from this XML file based on user-selected criteria via some check boxes. And I'll also need to build some kind of "show next 9 images" and "show previous 9 images" functionality.
I generally don't mess with the timeline, but I need to for this project. In a nutshell: user can customize a product reference sheet with her choice of crossection, footprint, etc. All those choices exist as external swfs. In order to be legible, the reference sheet must be two pages.I know how to print multiple frames with Flash. But what I cannot yet achieve is loading external swfs into movieclips on different frames, and then print that. Here's my code from a test fla:[code]Now, this code will print both frames as separate pages, but the loaded image in printArea.holder2 does not print!
View 3 RepliesFirstly, I want to be able to push the space bar on my keyboard during a swf, and for a movie clip to appear on the stage. This is what I have so far:
Code:
onClipEvent(enterFrame){
if(Key.isDown(Key.SPACE)){
_root.attachMovie("Explosion", "Explosion"+i, _root.getNextHighestDepth());
_root["Explosion"+i]._x = _x;
_root["Explosion"+i]._y = _y-20;
}}
but its not working....
Secondly, I want A movie clip to spawn in the middle of the stage, then randomly travel outwards to the edge of the stage, then dissapear. And this needs to happen over and over, with the same movie clip travelling to a different place each time. This is what I have so far :
Code:
onClipEvent(load){
timer = 0;
i = 0;
a = 0;
b = 0;
[Code] .....
I am creating a game called Piggy Attack.I am trying to remove some movie clips off the stage.I also tried it by adding them to the stage using as3 but neither are successful.They all come up with the error code:
[Code]...
I'm trying to use a loop to add some movie clips to the stage, but I want to give each one a different name so I can refer to them in another function, but I don't know how that is done. I'm trying to learn how to do this so I can create an Isometric game. Here's my code....
[Code]...
Im having trouble centering my movie clips on the stage.
I have postioned movie clip holders on the stage and and coded them to be invisible (10 of them). If the images loaded are less than 10, the extra movie clip holders stay invisible and the loaded ones become visible.I am struggling to center the visible movie clip holders.[code]...
I want to add 5 movie clips to the stage. The movie clip at this point is just a red box and called testMovie. Ultimately i want to have 5 red boxes displayed on screen tiled vertically one under the other. Here's the code i have so far:
[Code]...
I have a question that's been bugging me for a LONG time now. I'm still pretty new to ActionScript, I'm trying to have a series of movie clips move from right to left along the stage, but after about 3 seconds they stop! Here's the code...
ActionScript Code:
public function thingTimer () {
nextThing = new Timer (1000 + Math.random()*5000,1);
[code]......
Way of referring to all the movie clips on the stage at once, and of putting that information into a variable for use with hit detection.
View 3 RepliesIm trying to create a class which can access a movie clip on stage. I've searched many forums/google cant seem to find the solution im after. If i have a movie clip on stage with instance name 'mc1' for example. how can i access this movie clip from a class im creating. Eventually id be able to access the movieclip via a dynamic name but need to get past this simple stage first.
View 1 RepliesI'm using AS3 to place movieclips onto Flash's stage...
The code I have looks something like this:
Code:
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[Code].....
Currently when the player moves their cursor over the movie clips that AS3 is placing on the stage, they disappear. However the movie clip is not actually removed from the stage, it simply plays to a blank frame in its timeline to give this illusion. How do I tell Flash to remove the movie clip from the stage rather than just give the illusion that it is gone?
When the player moves their cursor over the movie clips that AS3 is placing, I want the movie clip that is attached to the cursor to gotoAndPlay certain frames of its timeline.
I have an array containing names of movie clips. I would like to loop through the array, and add the movie clips to the stage.
I have the following code, but obviously this doesn't work.
HTML Code:
var mcArray = [];
mcArray .push( "mc1" );
mcArray .push( "mc1" );
[Code]....
I am building a project that loads 30 images in to empty movie clips. I want one of the images to apear on top randomly. What is happening now is that the first swf in my loop always shows up on top.Here is a link to waht i am doing:Here is some code i am working with:
Code:
// Random range
function randRange(min:Number, max:Number):Number {
[code].....
I am building a flash site and currently I'm not using an timeline or any images in the library. I'm using the image loader class to load in all images for each page. The trouble is that images load one by one. I want them to wait until they are all loaded before appearing together on the stage.
First: Is this best practice? What do professionals do when it comes to loading images / pages.
Second: Even if I add a preloader they still load individually.
Here's some example code which loads the contents to my map.swf
public function Map() {
img = "PageBack.png";
page = new LoadImage(file, img);
addChild(page);
page.x = 85;
page.y = 209;