I'm trying to use a loop to add some movie clips to the stage, but I want to give each one a different name so I can refer to them in another function, but I don't know how that is done. I'm trying to learn how to do this so I can create an Isometric game. Here's my code....
[Code]...
So basically, this is how I'm adding one movie clip to the stage.
[Code]....
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 Replieshave a mc on stage ('sq') and it gets duplicated using the loop.have a simple Tween function for over state called 'over'how would I write so that when rollover on (for example) sq3,apply the over function to sq2 and sq4 as well (the ones next to the target)?[code]
View 3 RepliesI have five movie clips in my library. I want to load each to the stage with a fade in and fade out. I thought I could just call them into an array, but I can't find how to reference them. I have other clips in the library too so I can't just grab them all.
View 2 RepliesIs it possible to put the following into a loop?
ActionScript Code:
var box1:Box = new Box();
var box2:Box = new Box();
[code].....
I've got a MovieClip with a linkage name of trackInfo. I'm trying to get XML information in a for loop to create and populate instances of the MovieClip for the length of the XML file.Here's what I have so far:
Code:
var myXML:XML;
var myURL:URLRequest = new URLRequest("tracks.xml");
[code].....
All I am trying to do is display a movieclip (just a small rectangle) and have it repeat along the x-axis, adding one to it's instance name each time. It seems to work according to the trace statements but it only displays the last movieclip.
Here is the code:
var transition:mcTransition = new mcTransition();
for(var i:int = 1; i < 10; i++){ trace(i); addChild(transition); transition.x = i * 10; transition.name = "transition_mc" + i; trace(transition.name); trace(transition.x);}
I know this is probably really simple but it is frustrating me. All I am trying to do is display a movieclip (just a small rectangle) and have it repeat along the x-axis, adding one to it's instance name each time. It seems to work according to the trace statements but it only displays the last movieclip.
Here is the code:
var transition:mcTransition = new mcTransition();
for(var i:int = 1; i < 10; i++){ trace(i); addChild(transition); transition.x = i * 10; transition.name = "transition_mc" + i; trace(transition.name); trace(transition.x);}
So basically, this is how I'm adding one movie clip to the stage. var balloon_mc1 = new balloon(); this.addChild(balloon_mc1); How do I do this for 100 of these movie clips, without typing var balloon_mc1 = new balloon(); this.addChild(balloon_mc1);
var balloon_mc2 = new balloon(); this.addChild(balloon_mc2);
var balloon_mc3 = new balloon(); this.addChild(balloon_mc3);
I want to have 4 to n movie clips on my stage and to be be able perform monotonousperations on all of them in a for loop like so.
for(i=0;i<numClips;i++)
{
if(this.hitTest("clip"+i))
[code]......
I'm trying to make a portfolio page where each of my thumbnails loads with the 'fading grid' effect. I've made all the thumbnails movie clips with the appropriate script, and they all work fine. I've also set them to be exported for actionscript, each with a number as their name, i.e. "1" "2" and so on.
I was then planning on using the following bit of code to load these movies into my portfolio clip, to save me having to do it at author-time.
[Code]....
But for some reason, instead of loading two movies, each one 10 to the right of the previous movie, it just loads them on top of each other. Is it something to do with the stage not updating?
I have some (Eg. 10) Movie Clips on bottom of the Stage (aligned horizontally) with different sizes (different width & height). I want them to align vertically on middle of the stage with same gap (irrespective of their sizes) in between 2 Movie Clips. Is it possible using AS3 code?
View 3 Repliesim trying to run a loop and assign all my new movie clipswith different names. i have tried .name and ._name they dont seemto be working..
for (var i = 1; i<=5; i++) {
imageName = new ImageMovie();
this.addChild(imageName);
[code].....
I am trying to loop through an array of 5 movie clips using a timer. Below is the script that plays the first movie clip, then plays the next clip over and over.
var timer:Timer = new Timer(2000);
timer.addEventListener(TimerEvent.TIMER, onTimer);
timer.start();
[Code].....
k say i wanted to create a bunch of movieclips in a for loop but wanted to name them something different each time, how would i dynamically name them?
View 1 RepliesHow would I go about using a timer to initiate multiple movie clips at once, and then loop them if they are all different lengths so that they restart in sync once more?
For example, say at t=0, 3 movie clips are started. Movie clip 1 is 3 seconds long. Movie clip 2 is 6 seconds long. Movie clip 3 is 10 seconds long. Movie clip 1 would end before movie clip 2 and 3, but I don't want it to restart until the others are both finished.
Furthermore, is it possible to set a countdown so that the the movie clips are initiated not after a duration, but after a specific time? For example, instead of having a timer countdown from 10 seconds and then playing, it instead countdowns until say 12:00 PM and then plays the movie clip.
All i really want to do is be able to affect multiple movieclips at once with event listeners and greensock tweens.
The first snag I hit was that I couldn't create references to movie clips using the old [] Associative array referencing method. Maybe I still can with AS3, but I couldn't get it to work...
So I found another technique using getChildByName that returns a reference to a movie clips and allows me to store that reference in a variable.
However, the movie clip I'm trying to affect with an event listener resides inside of another movie clips, so to build the address (aka, root.mc1.m2.mc3) to the mc I want to get to is proving to be difficult. (I'm very new to AS3...)
I thought the trace(target1_mc.target2_mc.name); at the bottom of the following code would output the name of target2_mc but it doesn't.[code]...
I've been staring at the screen too long and I'm sure the answer is simple but this has been bugging me for a bit now. I've created a grid with over 200 movie clips dynamically using a for loop. I was wondering if there was a way to assign rollovers and such to each new clip using the same loop.
I've been poking around with it a bit but can't seem to get it working and sure don't want to write over 200 rollover functions so any help would be great.
All i really want to do is be able to affect multiple movieclips at once with event listeners and greensock tweens.The first snag I hit was that I couldn't create references to movie clips using the old [] Associative array referencing method. Maybe I still can with AS3, but I couldn't get it to work..So I found another technique using getChildByName that returns a reference to a movie clips and allows me to store that reference in a variable.However, the movie clip I'm trying to affect with an event listener resides inside of another movie clips, so to build the address (aka, root.mc1.m2.mc3) to the mc I want to get to is proving to be difficult. (I'm very new to AS3...)I thought the trace(target1_mc.target2_mc.name); at the bottom of the following code would output the name of target2_mc but it doesn't...[code]
View 2 RepliesI have a simple array of movie clips ("box1" "box6") that I have created on the stage. I then have a simple onRollOver function that is iterated for each of these movie clips, as shown below. As it is now it's working fine, but I can forsee two potential problems for when I use larger arrays and apply this technique to my real working files.
If I were to have many more movie clips, the first line of code would be much longer as it lists each movie clip instance name. Is there a way to use, for example, a for loop to include all these movie clips in the array without having to type out all their names? As you can see here, I have used a simple numerically-incremented naming process. I think the problem may be that I am using movie clips with instance names assigned on the stage and not created through ActionScript.The function as I have created it makes all the movie clips gotoAndStop(1) and then the one that has been rolled over goes to frame 2. Is there a way of making all the movie clips in the array except the one that has been rolled over gotoAndStop(1), ie. is it possible to exclude the rolled-over movie clip from the first part of the function? Here it works just fine as it is, but I'm thinking that maybe when I start using more complex functions with tweens etc it may cause problems. Or not?
[Code]...
Flash 8 duplicating movie clips and setting 3 nodes from XML. I am trying to read in an xml with 3 parameters; 2 links and one text field for a caption. What am I doing wrong this time?
[Code]...
I am trying to have "bMC" load into and repeater for however many XML props there are. within "bMC" are two MC's that on click would open window or grab file and One Text field which would load in caption. For some reason the "bMC" isnt even loading at all. Attached is the .Fla
I have a Flash site I am developing that feeds in XML into various arrays and populates dynamic movie clips and text fields. I am having trouble making a for loop that works with my movieclips and text fields. I am probably only missing one step and if I can figure it out I will cut my lines of code about 10X. I have attached the fla and image files in a zip file.
View 1 RepliesSuppose I've got 2 movie clips on the stage. box_mc and triangle_mc. I want to set up a way so that whenever I trigger the event, such as pressing a key (like
if(Key.isDown(Key.SPACE)){
//stuff that activates it
}
[Code]...
if I push the Space key again, it would start from the top (1) and repeat the sequence. The sequence would otherwise stop at 4. Previously I've been using counters inside an onEnterFrame such as counter = counter +1; if counter > n, counter = n; etc. This seems tedious and I'm hoping there's a better way to do this. I do not understand watch and timer functions of actionscript (they never seem to work for whatever project I'm occupied with).
I have used Flash on and off over the years but I've decided to hunker down and learn it in earnest. We have cs4 at work and I am having this problem.I checked out the differences between a graphic symbol and a movie clip, and it seems that the movie clip has some distinct advantages. But the main disadvantage is not being able to see what happens on the stage as it plays. How can I get around this limitation? Why does it even exist in the first place? I understand that scripting can complicate how it plays, but for example if I am making a straightforward animation, but parts of it depend on other parts that are in separate symbols, how can I see what is going on at a specific frame on the stage overall?
View 3 RepliesIf I create a 2000 frame Movie Clip and then drag it onto the stage of my main scene... shouldn't it work/play through it's entirety from within one frame of the main scene timeline? IOW I'm having to make the layer on the scene stage that i drag the movie clip onto 2000 frames long in order to see the nested 2000 frame movie clip play.Seems like in the past I could get Movie Clips to play and loop and what not from the main scene/stage without doing this.
View 12 RepliesI've set up a simple enter frame loop to adjust the alpha on a grid of movie clips ("bubbles") using a distance formula from the mouse pointer.I've got a hunch that while this works fine, there's a more efficient or processor friendly way to do it.
grid of mc's created here....and pushed into an array
stage.addEventListener(Event.ENTER_FRAME, loop);
function loop(e:Event):void{ for each (var j in bubbArray)[code].....
Firstly, I want to be able to push the space bar on my keyboard during a swf, and for a movie clip to appear on the stage. This is what I have so far:
Code:
onClipEvent(enterFrame){
if(Key.isDown(Key.SPACE)){
_root.attachMovie("Explosion", "Explosion"+i, _root.getNextHighestDepth());
_root["Explosion"+i]._x = _x;
_root["Explosion"+i]._y = _y-20;
}}
but its not working....
Secondly, I want A movie clip to spawn in the middle of the stage, then randomly travel outwards to the edge of the stage, then dissapear. And this needs to happen over and over, with the same movie clip travelling to a different place each time. This is what I have so far :
Code:
onClipEvent(load){
timer = 0;
i = 0;
a = 0;
b = 0;
[Code] .....
I am creating a game called Piggy Attack.I am trying to remove some movie clips off the stage.I also tried it by adding them to the stage using as3 but neither are successful.They all come up with the error code:
[Code]...
Im having trouble centering my movie clips on the stage.
I have postioned movie clip holders on the stage and and coded them to be invisible (10 of them). If the images loaded are less than 10, the extra movie clip holders stay invisible and the loaded ones become visible.I am struggling to center the visible movie clip holders.[code]...