I have five movie clips in my library. I want to load each to the stage with a fade in and fade out. I thought I could just call them into an array, but I can't find how to reference them. I have other clips in the library too so I can't just grab them all.
View 2 RepliesHow would I go about using a timer to initiate multiple movie clips at once, and then loop them if they are all different lengths so that they restart in sync once more?
For example, say at t=0, 3 movie clips are started. Movie clip 1 is 3 seconds long. Movie clip 2 is 6 seconds long. Movie clip 3 is 10 seconds long. Movie clip 1 would end before movie clip 2 and 3, but I don't want it to restart until the others are both finished.
Furthermore, is it possible to set a countdown so that the the movie clips are initiated not after a duration, but after a specific time? For example, instead of having a timer countdown from 10 seconds and then playing, it instead countdowns until say 12:00 PM and then plays the movie clip.
Flash 8 duplicating movie clips and setting 3 nodes from XML. I am trying to read in an xml with 3 parameters; 2 links and one text field for a caption. What am I doing wrong this time?
[Code]...
I am trying to have "bMC" load into and repeater for however many XML props there are. within "bMC" are two MC's that on click would open window or grab file and One Text field which would load in caption. For some reason the "bMC" isnt even loading at all. Attached is the .Fla
Is it possible to put the following into a loop?
ActionScript Code:
var box1:Box = new Box();
var box2:Box = new Box();
[code].....
I've got a MovieClip with a linkage name of trackInfo. I'm trying to get XML information in a for loop to create and populate instances of the MovieClip for the length of the XML file.Here's what I have so far:
Code:
var myXML:XML;
var myURL:URLRequest = new URLRequest("tracks.xml");
[code].....
All I am trying to do is display a movieclip (just a small rectangle) and have it repeat along the x-axis, adding one to it's instance name each time. It seems to work according to the trace statements but it only displays the last movieclip.
Here is the code:
var transition:mcTransition = new mcTransition();
for(var i:int = 1; i < 10; i++){ trace(i); addChild(transition); transition.x = i * 10; transition.name = "transition_mc" + i; trace(transition.name); trace(transition.x);}
I know this is probably really simple but it is frustrating me. All I am trying to do is display a movieclip (just a small rectangle) and have it repeat along the x-axis, adding one to it's instance name each time. It seems to work according to the trace statements but it only displays the last movieclip.
Here is the code:
var transition:mcTransition = new mcTransition();
for(var i:int = 1; i < 10; i++){ trace(i); addChild(transition); transition.x = i * 10; transition.name = "transition_mc" + i; trace(transition.name); trace(transition.x);}
I'm trying to use a loop to add some movie clips to the stage, but I want to give each one a different name so I can refer to them in another function, but I don't know how that is done. I'm trying to learn how to do this so I can create an Isometric game. Here's my code....
[Code]...
So basically, this is how I'm adding one movie clip to the stage. var balloon_mc1 = new balloon(); this.addChild(balloon_mc1); How do I do this for 100 of these movie clips, without typing var balloon_mc1 = new balloon(); this.addChild(balloon_mc1);
var balloon_mc2 = new balloon(); this.addChild(balloon_mc2);
var balloon_mc3 = new balloon(); this.addChild(balloon_mc3);
I want to have 4 to n movie clips on my stage and to be be able perform monotonousperations on all of them in a for loop like so.
for(i=0;i<numClips;i++)
{
if(this.hitTest("clip"+i))
[code]......
I'm trying to make a portfolio page where each of my thumbnails loads with the 'fading grid' effect. I've made all the thumbnails movie clips with the appropriate script, and they all work fine. I've also set them to be exported for actionscript, each with a number as their name, i.e. "1" "2" and so on.
I was then planning on using the following bit of code to load these movies into my portfolio clip, to save me having to do it at author-time.
[Code]....
But for some reason, instead of loading two movies, each one 10 to the right of the previous movie, it just loads them on top of each other. Is it something to do with the stage not updating?
I'm pretty sure this is probably a really stupid question. I have about four separate movieclips in my main time line. Each movieclip has its own animation and its own stop function. When I preview it it works fine.However when I try and add actionscript to my buttons everything else starts to loop. What am I doing wrong and how can I get around this?
I just tried putting the buttons in a separate movieclip and doing the actionscript in that instead of the main timeline but it still didn't work.
im trying to run a loop and assign all my new movie clipswith different names. i have tried .name and ._name they dont seemto be working..
for (var i = 1; i<=5; i++) {
imageName = new ImageMovie();
this.addChild(imageName);
[code].....
I am trying to loop through an array of 5 movie clips using a timer. Below is the script that plays the first movie clip, then plays the next clip over and over.
var timer:Timer = new Timer(2000);
timer.addEventListener(TimerEvent.TIMER, onTimer);
timer.start();
[Code].....
So basically, this is how I'm adding one movie clip to the stage.
[Code]....
k say i wanted to create a bunch of movieclips in a for loop but wanted to name them something different each time, how would i dynamically name them?
View 1 RepliesAll i really want to do is be able to affect multiple movieclips at once with event listeners and greensock tweens.
The first snag I hit was that I couldn't create references to movie clips using the old [] Associative array referencing method. Maybe I still can with AS3, but I couldn't get it to work...
So I found another technique using getChildByName that returns a reference to a movie clips and allows me to store that reference in a variable.
However, the movie clip I'm trying to affect with an event listener resides inside of another movie clips, so to build the address (aka, root.mc1.m2.mc3) to the mc I want to get to is proving to be difficult. (I'm very new to AS3...)
I thought the trace(target1_mc.target2_mc.name); at the bottom of the following code would output the name of target2_mc but it doesn't.[code]...
I've been staring at the screen too long and I'm sure the answer is simple but this has been bugging me for a bit now. I've created a grid with over 200 movie clips dynamically using a for loop. I was wondering if there was a way to assign rollovers and such to each new clip using the same loop.
I've been poking around with it a bit but can't seem to get it working and sure don't want to write over 200 rollover functions so any help would be great.
All i really want to do is be able to affect multiple movieclips at once with event listeners and greensock tweens.The first snag I hit was that I couldn't create references to movie clips using the old [] Associative array referencing method. Maybe I still can with AS3, but I couldn't get it to work..So I found another technique using getChildByName that returns a reference to a movie clips and allows me to store that reference in a variable.However, the movie clip I'm trying to affect with an event listener resides inside of another movie clips, so to build the address (aka, root.mc1.m2.mc3) to the mc I want to get to is proving to be difficult. (I'm very new to AS3...)I thought the trace(target1_mc.target2_mc.name); at the bottom of the following code would output the name of target2_mc but it doesn't...[code]
View 2 RepliesI have a simple array of movie clips ("box1" "box6") that I have created on the stage. I then have a simple onRollOver function that is iterated for each of these movie clips, as shown below. As it is now it's working fine, but I can forsee two potential problems for when I use larger arrays and apply this technique to my real working files.
If I were to have many more movie clips, the first line of code would be much longer as it lists each movie clip instance name. Is there a way to use, for example, a for loop to include all these movie clips in the array without having to type out all their names? As you can see here, I have used a simple numerically-incremented naming process. I think the problem may be that I am using movie clips with instance names assigned on the stage and not created through ActionScript.The function as I have created it makes all the movie clips gotoAndStop(1) and then the one that has been rolled over goes to frame 2. Is there a way of making all the movie clips in the array except the one that has been rolled over gotoAndStop(1), ie. is it possible to exclude the rolled-over movie clip from the first part of the function? Here it works just fine as it is, but I'm thinking that maybe when I start using more complex functions with tweens etc it may cause problems. Or not?
[Code]...
I have a Flash site I am developing that feeds in XML into various arrays and populates dynamic movie clips and text fields. I am having trouble making a for loop that works with my movieclips and text fields. I am probably only missing one step and if I can figure it out I will cut my lines of code about 10X. I have attached the fla and image files in a zip file.
View 1 RepliesI've set up a simple enter frame loop to adjust the alpha on a grid of movie clips ("bubbles") using a distance formula from the mouse pointer.I've got a hunch that while this works fine, there's a more efficient or processor friendly way to do it.
grid of mc's created here....and pushed into an array
stage.addEventListener(Event.ENTER_FRAME, loop);
function loop(e:Event):void{ for each (var j in bubbArray)[code].....
I have created a loop to add my clips by class and give them a name
[Code]...
Then I want to loop through these clips and change the alpha, I have tried casting as I thought that was how you do it but I get the 'cannot convert string' error
[Code]...
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
i have an xml file
<xmlfile>
<file name="numero1" />
<file name="numero2" />
<file name="numero3" />
[code]....
they can have any names, this is just an example. so..and in my actionscript panel, i have the code:
the var bit...
myxml.ignorewhite = true;
max = 40
[code]....
following this code, still in the for loop, i tried to create an empty movie clip, which loads a secondary swf, called "button.swf". as follows
this.createEmptyMovieClip("myMC",i) // "i" being the depth
myMC._x = 40;
myMC._y = max;
[code]....
so...when i run the movie, it all appears blank. just for your information, if i take the whole ''movie clip creation'' bit out of the whole loop, it works fine. just once, but fine you got the idea what i'm trying to do here.. it's a list of buttons... because i don't want to use the list component. anyway, continuing. i don't know how to make it work. i've been guessing the problems might be with the same instance myMC bit, and i don't know how to create a different one each time(i've been trying though ) or with the depth..which still i can't figure it out.
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 RepliesI'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 RepliesHow would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.