I'm still having trouble mapping my as3 class to a server side class in C#. I've been through several tutorials and the official documentation butI must be doing somethiing wrong. I found that I have to use an attribute in my as3 class: [RemoteClass(alias = "FlashRemotingExample.WorkerCS")] But that is still not working.
View 1 RepliesIf I've got a bunch of plain old Objects, what's the best way to map them to a bunch of Classes?For example, if I use an HTTPService to pull in some JSON, then deserialize it, I'll have a bunch of objects which look like:
{ type: "person",
id: 42,
name: "David" }
And I want to turn them into instances of a Person class:
class Person {
id:int;
name:String;
}
(also to be considered: how about some standard way of dealing with relationships between objects? For example, if the Person had an additional "spouse" field:
{ type: "person", spouse: 61, ... } // Where 61 is the ID of the spouse
)
I have application server that I wrote in csharp. The server is communicating with Flash client built using FLEX 4 (Flash Builder 4.5). The communication between the server and the client is done using RTMP.
For the RTMP capabilities in the server side I used the FluorineFX (hosted in IIS7). All the connections is done using Remote procedure calls where the Flash client executes remote procedure in the server and getting the results in the RPC response callback function.
The server also can send messages to the client using RPC as well. My problem is that the server diconnects all clients 6 minutes after the last client connected and I can't figure out why it is doing it.
[Code]...
I am in the planning stages of developing a large web application written in Flex and was wondering if anyone has actually used FluorineFX in a large production environment?
The documentation and online community makes it seem like it could be abandoned in the years to come and I have yet to read about it being used in production.
I have been assessing Weborb as well, but the costs are extremely high and I'm not entirely satisfied with the general workflow/setup of it. Are there any other solutions out there that I should consider?
I'm trying to create a very simple chat application in Flex/.Net using FluorineFX but can't get it to work.
<mx:VBox
width="100%"
height="100%"
xmlns:mx="http://www.adobe.com/2006/mxml">
[code]...
It's compiling all fine, and when I try to send I don't get any errors, but also no result. No message is received. Am I on the right path? What's the logic behind the endpoint uri? What port should I use? Should I configurate Web.config? (beyond the flourinefx configs that enable RemotingService?) I don't get any response in the flourine.log.
How i can connect to FluorineFx RTMPT server? And how can i configure FluorineFx RTMPT server? Can i start FluorineFx RTMPT server without IIS installed?
View 1 RepliesI can't figure out how to publish an audio stream from a client to the server using FluorineFx on the client. We want to stream recorded audio data from the client to the stream via the already established NetConnection. There is a NetStream class in FluorineFx but it has no publish method. The NetStream class in FluorineFx only has the play method. But as far as I understand this plays a stream from the server on the client. Is publish not implemented in FluorineFx or do I miss something?
View 2 RepliesI am trying to get a RTMP messaging application working in FlashDevelop and FluorineFx. I am used to connecting with a NetConnection in FlexBuilder 3 with some hackery but I am drawing a blank getting this to work with FlashDevelop. I have a FluorineFx website with a configuration file WEB-INFflexservices-config
[Code]....
[Code]...
Etiam nisi ligula, sodales non, pharetra eget, tempus ac, purus. Vivamus sagittis mollis risus. Proin dictum libero a elit. Curabitur feugiat, metus sit amet convallis imperdiet, est tortor volutpat nulla, eget mollis diam nisi vel lacus. In diam ligula, euismod eu, dapibus non, fermentum quis, urna. In consequat pede eget erat. Quisque luctus felis. Mauris dignissim. Fusce pulvinar, dolor sit amet porttitor egestas, quam massa tristique pede, nec porttitor diam odio in magna. Mauris congue mauris eu lectus. Duis eu felis ut ligula consectetur blandit.
[Code]...
I am using ZendAMF for remoting.
<?php
error_reporting(E_ALL | E_STRICT); //error reporting, not needed
require_once "Zend/Amf/Server.php"; //the zendAMF server
require_once "process.php"; //our test class
[Code]...
I'm building image processing or mapping system kinda like google map except we have our own HD images so i'm not sure what is the best way to do this in .NET here is what im trying to do Mapping web application build in .NET i've High resolution images , the user first load the selected area a full scaled image should be loaded 100% (original image) then he Zoom to the area he want, then he can move around this area almost like google map
1.user select area - full scaled image loaded
2.user zoom to random area - (i will receive some values for X, Y, etc.. in query string then i will extract these values and zoom/return the image based on these values)
So i'm not sure what is the ideal solution for this is it just zoom/re-size image based on the vales received from the user, or its more complicated than that?
i have an xml that i want to cast to a value object using the schema regitry class in flex..
so, i did sth like this :
Code:
var qname:QName = new QName(schema.targetNamespace.uri, "parameterTable");
schemaTypeRegistry.registerClass(qname, ParameterTable);
[Code]....
where the value is the xml value requested from the server using http method, i get a null value when i dbug the param content.
which is the best flash mapping api (with good support and reasonable price) to use in my flash project. I have used UMapper �s Umap before but it�s too expensive for a commercial license and the support was not that good.
View 0 RepliesI'm new to flash and working to embed the flash player in a .NET application. It's going "well" for the definition of "well" that adding the COM control and getting it to play a movie was easy and took about 3 minutes.What's not going well is that I cannot find documentation on the variable to string mapping used the SetParameter variable parameter. To coordinate between the apps, I want to be able to say: "flashPlayer.SetVariable("flash_variable", "value_to_set"). Obviously SetVariable does this. What's not obvious is how "flash_variable" is constructed.
For example, in the actionscript for a button called "OneBigButton" I have the following code:
OneBigButton.addEventListener( MouseEvent.CLICK, onClick );var testSetValue = "value";function onClick(evt:MouseEvent):void { trace("got the click " + testSetValue); outputText.text = testSetValue;}
When I try this:
flashPlayer.SetVariable( "testSetValue", "foo" );
The results do not get set in testSetValue.
I'd love a pointer to the documentation on how namespaces, class instances, etc affect the string construction used in SetVariable and GetVariable as I can't find it anywhere.
When I login a new session is generated. How can I later know for which login the session was generated? I am getting the session value, but how do I know which user the session is for and redirect him to that page?
View 1 RepliesI am building an application using Flex 4.5 and Zend_AMF as my AMF endpoint.I would like to map a class called CRequest in PHP to a class called Request in Flex.This is my php class:
<?php
namespace appweb;
class CRequest{
[code].....
Dear goodness, am I the only person on the web trying to send a VO object from Flash to AMF where the properties are read only/getters? If I add a setter that does nothing but throws an Error it works. If no setting is present in Flash, it fails. Is there a way to send objects to AMF that have getters and not setters?
View 3 RepliesThe way my test works, I draw a path on a displacement map using the mouse, and this displacement is applied to the same image every frame (i.e., the displaced image of the last frame is displaced again). Colors are flowing along the path as they should, with one problem: the displaced pixels always turn transparent after a few seconds.At first I thought this had something to do with the DisplacementMapFilterMode, so I tried setting it to "COLOR" using an opaque bright blue, while the stage behind my warped image is a highlighter green. Nope, the FilterMode color is only used for pixels sampled off the image, while my interior pixels were turning completely transparent of their own accord. I tried removing the alpha channel from my distorted image, and then the pixels would just turn black instead of transparent.
So, now I'm stumped. I've viewed my displacement map to make sure it looks right, I've tried setting the displacement scale to low and high numbers, and I've checked the channel assignments, all to no avail. Here's my code, and I've attached the .fla as well, so you can see what's happening. If you run the file, just make your mouse is located in the center of the frame before it starts, or you'll end up dragging the blue fill color in from off the screen.
Code:
// "spider" is the name of a named movie clip instance containing
// an image on the stage, having the same dimensions as the stage
[code]......
if it is poosible image mapping in flash like in html <maparea>? is yes means how to do that in flash?
View 2 RepliesI have four points that make up a rectangle (note: the four points have the same aspect ratio as the window). The rectangle itself can be moved and scaled (again, keeps it's aspect ratio).
I want to map the root's positions (_x, _y, _xscale, _yscale) so that the box is always the frame of the window. This should be easy enough, except for the fact that the root's "hotspot" (position which it scales from) is always 0,0.
NOTE: I use four points to make the rectangle: xLeft, yTop and xRight, yBottom
come up with some code to change the root's _x, _y, _xscale, and _yscale to fit this rectangle
I've done a bit of web design work,and have used Flash a little,so familiar with the principles of the timeline, keyframing, and twining etc.The sort of thing we might be looking to produce would be similar to this site below :[url].....how technically challenging that might get,or is it the sort of thing that although looks complex, might be relatively easy to achieve armed with a reasonable understanding of the Flash principles that are driving it.
View 10 RepliesI am have about 80% of a my website built and buttons all mapping where they should go, along with a number of XML driven BANNER ROTATORS/ACCORDIAN MENUS...ect
This site requires users to be signed in, which is done through a site previous to mine. Once they log in, they can click a button which then allows them access to my site.
My site has three "user levels" or "autentication levels" as we have "Managers", "Supervisors" and "Staff" levels.
For testing purposes, we have placed the below actionscript in the first frame of my project. The purpose of this actionscipt is to reference the "authentication level" that the user is using (as they will have already signed in so we are simply looking to obtain their "auth level").
[Code]...
I'm using this tutorial to create buttons with displacement mapping for my simple game menu. These buttons need to be clickable; i.e. once you click on them you move to a different frame. Everything works fine on the first frame, but when I click to the next frame the displacement map disappears and will not apply to the buttons on that frame. Plus, when I click my "back" button to return to Frame 1, the displacement effect has disappeared entirely.
This is the code which is in the base "Game" class, which links to the main Flash file.
package
{
import flash.display.MovieClip;
import flash.events.MouseEvent;
[Code]....
It calls the JitteryButton class, another external class, which I don't think is the problem, but I can post if if necessary. It's very similar to the one in the tutorial. Also, I need to add different buttons on other frames of the menu, but if I call them in this external class, it doesn't recognise them.
can anyone spot why this might stop working like it does? I was thinking about instead of using "Game" as an external Actionscript file, I could actually write it into Flash as Actionscript on a layer - would this work?
I'm working on a website using :
- Flex 3.4
- AMFPHP 1.9b
- Propel 1.3
- PHP/MySQL
I'll try to focus on the problem which takes place in a whole system.To sum up, I have 2 entities (MySQL) :
create table AAA
(
id_AAA int not null auto_increment,
id_BBB int,
[code]....
I retrieve all my BBB, they are mapped from PHP classes (generated by Propel) to AS3 classes on the Flex side.But when I create a AAA row in the database.I retrieve all my BBB, and all objects are mapped EXCEPT the BBB whose id corresponds to the foreign key in the inserted AAA row.
if you know anything about how AMFPHP / Propel / Flex are dealing with Foreign Keys and why class mapping is failing right here.The weird thing is that it seems to happen only for this specific case ...
I have an issue when consuming a web service from a Flex app. In the backend I have a hierarchy, let's say I have an abstract class Fruit, and 2 implementations: Apple and Orange. Fruit has a property, name, Apple has a property color, and Orange has a property radius. Then, I have a service wich returns a collection of Fruit. When I consume it from Flex, this collection returns objects wich type are Fruit, with its name property; but I lose all the properties for the implementation classes (color nor radius). So, the question is, does Flex support inheritance mapping when using web services? If not, is there any workarround?
View 1 Repliesi am developing an application where client can add his photos to appear on a sphere or ball or coffee cup and able to save them and give it for printing using flex. like itasveer.com site. i tried to use away3D but if the image is small it is stretched and added to sphere. i dont want it to strech instead the original image shud appear on the sphere. if it is added to cup it shud cover only the circular part it shud not add this to top and bottom.
View 1 RepliesI have 2 java classes that are the same (imagine the getters and setters):
class ScheduledEvent {
private String eventName;
private List<eventValues> values; [code]....
Now there is a reason why there are two classes that are the same.When something is "scheduled", I should get the ScheduleEvent object and when an event is started, I should get the StartEvent object.And depending on the object I get back, I do different things.My problem is that, on the backend, it will send me the ScheduleEvent object, but once it got to the flex side (via BlazeDS), it becomes a StartEvent....
At first, I thought it's because these two events have exactly the same variables, so I tried changing ScheduledEvent by adding a dummy variable (String foobar) but that didn't seem to make a difference.
EDIT: I'm using BlazeDS messaging system.That's why I am not using "one java method call to one responder" approach. So, in the message.body, I should be getting ScheduledEvent but I keep receiving StartEvent. I'm wondering if it's because the two objects have the same property and BlazeDS doesn't know how to map them correctly... I even put a break point in the java service layer, to make sure that the appropriate object is being sent back and it is... But by the time BlazeDS serializes and deserializes it to the flex side, it is now a StartEvent.
How would I convert a point in the longitude & latitude to x and y (pixels) on a mercator-projected map, assuming I know the exact dimensions of the map (by longitude/latitude, and pixels)?
*Someone* has had to have created a class that handles such relatively basic and essential (not for me, unfortunately!) math; remapping a point, measuring the distances, etc.
Any tips? I've read some formulas (including the one here: [URL], but I admit that my math is quite poor at this level, and I've got no idea how to convert such a thing to AS, nor if there are other considerations I'm missing.
I'm just coming back to toying with 3d in flash. All my previous efforts were made in AS2 so drawTriangles() is liquid-awesome to me... Still, am I right in thinking that the UV mapping of drawTriangles is only really useful for two-triangle planar evaluations? In other words, there isn't any way to pipe in the UV map data required to skin a whole model - even a simple cube - in one call to drawTriangles, is there?
I got my hopes up when I saw I could draw the whole wireframe of an object in one call, but everything I read suggests the UV coordinates are relative to the vertices, not the indices. So I'm thinking that the UV value for a vertex can't be redefined for triangles sharing vertices as described by the index. Is that right? If so, I guess you could draw the whole thing in a single call if you threw away your index and passed all the unconsolidated vertex information. Seems like an awful waste if that's right.
I'm exploring various ways to get data into a DataGrid component from a remote service. I've managed to use DataGlue to map my results to different fields the DataGrid, however what I'd like to do is use the component inspector to and bindings. The Problem i have is that I want to display only certain fields. so in the remoting connector i have this set up conn::results.items.[n].id => grid::dataProvider.[n].identifier Now I would assume that my grid would show the id in the results returned but it doesn't. I've seen a lot of posts on this so I know there are a lot of others puzzled by this.
View 1 Replies