Relative newb to Flash and not sure what the issue is but I have a shelf opening and closing effect The timeline is 45 frames long and when the shelf is out it has this AS3 code in it:
import flash.events.MouseEvent;
stop();
ShelfOpen,addEventListener(MouseEvent.CLICK, closeShelf);
[code]......
I opened from my main swf a new one with addChild. Now in the 2nd swf i need a button to close this swf and open another one ... I done this way because the button i puted in the main swf does n´t work (maybe because i´m using in both swf liquid layout with a resize function). How can i do to close the 2nd swf and open another one.
View 2 Repliesim having a big problem with my pop ups. at the moment i am using the code form this tutorial [URL]. The windows pop up, the problem lies in that the pop ups wont replace each other. if one pop up is open, trying to open another one just makes the old pop up active, it doesnt open the contents of the new one. this is a big problem since the pop ups are for my portfolio to show the work at larger sizes. is there a way to tell the new pop up to close the old one and then open? would this be some sort of if... else statment? or is there some other code i should use for the pop ups? either way,
View 1 RepliesI wrote this code that loads and unloads object to the screen. But have small issue. When i press the CityButton it loads the object... i dont want the villageButton or anything to be selectable until the CityButton is pressed again which causes the loaded city object to be removed.
/*//this is the button events for each name*/
cityButton.addEventListener(MouseEvent.CLICK, clickHandler);
villageButton.addEventListener(MouseEvent.CLICK, clickHandler2);
[code].....
The windows pop up, the problem lies in that the pop ups wont replace each other.if one pop up is open, trying to open another one just makes the old pop up active, it doesnt open the contents of the new one. this is a big problem since the pop ups are for my portfolio to show the work at larger sizes. is there a way to tell the new pop up to close the old one and then open? would this be some sort of if... else statment? or is there some other code i should use for the pop ups?
View 1 RepliesI wanna make like a popup effect with a close btn, the matter is that I don't know how to fix it. So any time that I click on any btn will only show a popup, then if I click in another btn the previos popup disappear and shows the new one, by now I can't figure out how fix it.
View 1 RepliesI trying to close a message box with a okay button inside its movieclip but i keep getting "1119: Access of possibly undefined property btnOk through a reference with static type flash.display:SimpleButton." error message when testing.Below is my code. anyone please help.
Code:
//open message box
btnPassport.addEventListener(MouseEvent.MOUSE_DOWN, btnPassportClicked);
function btnPassportClicked(event:MouseEvent):void {[code]...........
I am stumbling across this issue as I open and close a sound stream. This is the code I use, not sure if closing and opening a stream on the same function is a good idea.
[Code]...
I have an HD video that I shot of curtains or drapes opening and closing. I would like to make something in Flash where someone could click one side of the curtain and pull it open. When they release the mouse it should close back. In the video both sides open at the same time so I'm not sure if I can make the sides independent or not. If I can do this I may also want to make a version where the curtain stays where they released it.After I make a web version I am going to try to turn it into an app for a smart phone. The online use with a mouse is way more important at this time.
View 6 RepliesI have a NetStream publishing properly using multicasting for fp 10.1. My problem is that I can not close the steam and open it back up. I call .close() on the netstream object and receive this message:
NetStream.Unpublish.Success
I then call .publish("same stream name") and receive this error:
Netstream.Publish.Badname
Is there a way to programmatically close an open file dialog?
My current problem is this: I have a small file download program. When the user clicks a button, it will pop-up the Save As dialog. The problem is, if the user closes the Firefox window, the dialog stays open. And when the user wants to close that dialog, he or she can't anymore. It won't respond. The only way is to kill the plugin process (on Linux anyway).
So is there a way to monitor opened file dialogs?
I've tried to get the browser to notify the Flash app that it's closing, which works great. The problem is even if the app knows it should close the file dialog, it can't...I've tried setting the FileReference to null, using delete on it, calling the garbage collector, etc., nothing seems to have any control on that dialog.
I created this web page in Flash AS3 and I need codefor a button that will open and close pop-up swf file on stage, not in a new window.
View 1 RepliesI'm making a site where I need the music player to go on and off the screen wehn you hit a close/open button. Click here to view the Radio opens but can't close. This is the code I use:
[Code]...
I didn't know where this should go; I thought this was the best place. In Actionscript 2.0 I'm trying to draw the shelf of a closet (wall-to-wall) but I don't know how to.
View 1 RepliesAfter working for a prolonged time on a programming problem, I start to get coding tunnel vision. It makes it harder to draw back and look at the problem from farther away. Hence my question: I am using a Drupal 6 site. When a menu option is clicked, the page opens and a Flash SWF file needs to played in a ThickBox. After 8 seconds, that Thickbox closes.
Opening the SWF file in the Thickbox when a link is clicked is no problem, just like closing the Thickbox afterwards; that's basic javascript. For that I use these:
[Code]...
But opening the Thickbox on load? I can add a link for the user to click, but it should open automatically. I figured out the PHP to have it only open on one specific page. From the Thickbox manual, I learned to open links to images - but not how to open it when the page loads.
I am a super noob at actionscript. And I want my button to open a movieclip and then close the movieclip when clicked on again. I have no idea what to add after that here is the code I have for the button so far.....this button opens it.
on(release){
this.linemc5.gotoAndPlay("ear");
}
and this is another button I made that can close it, but I want it to be in the same button rather than seperate.
on(release){
this.linemc5.gotoAndPlay("earclose");
}
I need very easy and basic instructions to open a Lightbox 2.04 effect from Flash.
I need to know where I have to write the code, for example do I write the HTML code in the Actionscript, or in my HTML file???
I managed to make Lightbox 2 work from HTML (click on the image). (take aay the dots from the www as I could not attach a link)
[URL]
Now, I want to have the same thumbnail in Flash but as a button and make it open that lightbox.
I've got a drop down menu. I want to click a tab to make it drop then, if it's open, click it again to close. I've tried a million variations on the script below:
var btn_grp1:String
function main1Down(event:MouseEvent):void {
if (btn_grp1 != "dwn") {
[Code]....
This works too (once). So the drop down buttons all disapear again, but it won't re-set. The drop down menu stays up from then on.
BTW i'm not set on this method, it just seemed the most obvious i.e. if menu hidden, then show it, set some variable to down (showing), else hide the menu, set var to up (hidden). Not working though.
Does anyone know how to create a 'open book' flash effect (or similar) Perhaps something like this: [URL]..
Is it too difficult to do...?
I have a picture on the stage that has multiple items that have hotspots/links over them that should open a child swf on top of the background and show details about the items. then have a button in the child swf itself that removes the child from over the background so the user can click on another item etc.I found this code in someone's post and I am trying to modify it so that works for multiple swf files...it currently works for a single swf.I wan to pass the name of the button in front of the .swf in the URLRequest to have the same name as the instance name of the referring button. But I can't figure it out. Here is the code I am using on the stage
View 2 Repliesi want to close browser by clicking on close button embedded swf. I have tried fscommand("quit"), but which is not working on browser.
View 9 Replies*let say i have a mc called A. it can call a MC with an instance name called window_btn.window can be drag and double click.i want to put a close button in the window MC to close the window.
how to call the close button in the MC?
check out: [URL] The typewriter effect here is very fast, much faster than when I use onenterframe to produce the effect. Does anyone know how this is done?
View 14 RepliesI really like the text effect Pom used in the footer contest, and would like to use the same grid-type method of creating mc letters but with a different effect. i understand how to change the parameters and shapes of the letters, but can't seem to figure out which piece of code is purely for the explosion effect. basically, i want the letters but with the 'Repel' effect from[URL] here is Pom's AS:
[AS]
cellSize=3;
radius=10;
damp=.85;
[code]....
and here is the .fla using the repel effect using pre-made mc:
It's a bit of decoration to go behind a logo. When the dMove var is commented out I get the appropriate line of squares fading in and out at random spots along the x = 78 axis, but when introduced nothing appears at all...
[Code]....
So I tried to code something in AS3, it works technically, but not so smoothly. Try opening the three graudge doors here: [URL]..
They don't relly want to open and seem to open when the mouse moves out of the movies clip which is not how it's programmed:
[Code]...
is there a way to change the code and create attraction effect instead of push effect?i tried but without success...!
View 1 RepliesMy query is how would I open windows open or save as dialog box through flash?
View 2 Repliesin a nut shell I have found this wicked piece of open source actionscript.
It responds to the cursor and was wondering if it is posible to modify the x_position and y_position actions and make the action respond to a moving object???? (a movieclip with a variable name)
is this to complicated to attempt or is it doable??
ACTIONSCRIPT
Code:
//
var rows, colm:Number;
//
[Code]....
I need to made a Browser windows before that i open the Flash movie, like this one: [URL] So i need somme kind of pop up to run when somme one opens the site, and then see the movie.
View 6 Replies
