ActionScript 3.0 :: Placing Items Evenly Spread In A Circle?
Jun 9, 2009I have a round workfield and want to place 10 items evenly divided around the border. So basically I want to spread 10 items over a circle (not a line).
View 12 Replies
Similar Posts:
ActionScript 1/2 :: Placing Items In A Circle?
Jun 26, 2010I'm intended to create a code where I have various arcs which can be dragged and dropped inside a blank circle. Once a arc is dropped and on dropping second arc it should get placed after 1st arc with-in that circle.
View 5 RepliesActionScript 3.0 :: Evenly Spread Out 4 External .swf's?
Oct 1, 2009I am using he uiloader component to load 4 external swf's. But I've got a problem with spreading the uiloaders evenly on the stage when it resizes (with different browser sizes). How can I solve this to put the :
1 uiloader on 0% vertical axis
2 uiloader on 25% vertical axis
3 uiloader on 50% vertical axis
4 uiloader on 75% vertical axis
how to achieve this with AS3 code.
ActionScript 3.0 :: Spread Items In A Circular Path With A Right Rotation Angle Facing The Center?
May 29, 2011I am trying to place leaves in a circle to create a flower with code. I run into some problems.Is it possible to rotate the leaves so they all rotate in the direction of the center of the flower? And is it possible to calculate how many leaves can fit around a certain circle radius without to much overlapping?
View 1 RepliesActionScript 3.0 :: Placing Objects In A Circle?
May 24, 2011i am makeing a poker type game. and i have come a lil stuck. i have 8 players around a table. i have a player class that creates a new player when a button is pressed. the prob is io can get all the players cards x & y pos in lines like on the same x or same y axis. but how would i make the cards deal around a table. would i have to work them out and write x & ys for each player or is there another way?
View 4 RepliesActionscript 3 :: Flex - Placing Items On The Canvas Element?
Oct 11, 2009I am writing simple game on flex. In the game there are 2 objects Board and Stone (both are extended from the Canvas super class)When I started to place Stones instances to the Board Canvas, I come across the problem, I can't understand how to set Stone on the defined position on the board.So if for example board (canvas) has following attributes: x = 25, y = 25, height = 100, width = 100How can I for example place a Stone (canvas) in a point 25, 25.
View 1 RepliesActionScript 1/2 :: Placing Xml Menu Items Inside A Movie Clip
Jul 14, 2009I have a basic XML menu that dynamically attaches the menuItem instances to the stage. They are being attached to the root timeline, but I want to put all of the actionscript inside a movieclip called "menu1_mc". I am having some trouble with the proper syntax, because when I move the code inside of the movieclip, I can't get them to attach to the stage unless I still reference _root. I'd like them to attach at (0,0) of the menu1_mc movieclip.
[Code...]
Actionscript 3.0 :: Place Items Along A Circle?
Aug 18, 2010I'm attempting to place items along a circle, if i do:
Code: Select allvar arcLength:Number = ( Math.PI ) / 29;
...
var p : Point = Point.polar( 200 , i * arcLength );
(29 is the number of items)
Math.PI gets me the bottom half of the circle, but I'm attempting to get these items on the left half of the circle...
ActionScript 2.0 :: Display Items Like A Circle?
Jun 4, 2007I want to display some rectangle's on a imaginaire circle. But it doesn't appear as I want to.
This is my code:
Code:
var items = 8;
for(var i=0; i<items; i++){
//make a random rect.
[Code]....
Spread Transparent Area Over A Map?
Jan 28, 2010On the opening of the map where it shows a transparent red spreading would you create the growing red transparent area over the map in the Pacific with transparent shape tween. Also any tutorials on doing this.
View 2 RepliesActionscript 2.0 :: Treating Each Spread As An Object Which Has Two Mcs To GotoAndStop?
Apr 9, 2009I've been spinning my wheels on this and can't seem to find anything to learn off of... what I need to create something like this
[start] [prev] ... [11-12] [13-14] [15-16] ... [next] [end]
so the end product will have 3 stages
[1-2] [3-4] [5-6] ... [next] [end]
[code].....
IDE :: Center Window And Spread Background Out Infinitely?
Apr 5, 2010I have just built my first website in Flash CS4 and have come across a couple problems. When I published it online, I found that the site is not centered and has a huge white area around it. How can I center the window and spread my background out infinitely?
View 2 RepliesProfessional :: Splice Up The Contents Of A Video Object And Spread Them Out?
Jan 19, 2011I have a video and I want to crop part of it and have it play somewhere else on the screen.
Is there a way to do this, possibly by overriding the draw function of flash.media.Video?
ActionScript 3.0 :: Break Up An Image And Spread Each Piece Over A Grid?
Jun 13, 2009Is there a way to break up an image and spread each piece over a grid. each pice will have to be independent so it can move freely,
Is there a different answer from attaching all of the movieclips with different parts inside over a mask,
ActionScript 2.0 :: Randomly Spread Movieclip In The Specified Dimensions Of Stage
Dec 20, 2004i've one movile clip,i want several instances of dat movieclip randomly spread in the specified dimensions of stage.dis is simple but i want 2 start from one location then they should stop ramdomly and at radom palces wid random speed [URL] in above site ,if u click portfolio button u can see d red movieclip movement.
View 1 RepliesActionScript 2.0 :: Calculate The Direction And Speed A Circle Has After Colliding With A Static (non-moving) Circle?
Mar 8, 2005I'm developing a game atm, and I need some help on the mathematics/coding of colliding circles (and their change in x/y speed). What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision
If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled. Does anyone here have any insight, links or tips on how I can du this?
ActionScript 2.0 :: Make One Circle Follow The Mouse Cursor Inside Another Circle
Sep 30, 2005i want to make one circle follow the mouse cursor, inside another circle. Similar to an eye looking at the cursor. Ive attached an example.
View 4 RepliesActionScript 2.0 :: If Statement / Variable - Say If Circle Shows Up Change It To Circle (french)
Nov 5, 2008I have text in a dynamic field showing up as circle. I want to say if circle shows up change it to cercle (french).
[Code]...
ActionScript 2.0 :: Calculate Direction And Speed Circle Has After Colliding With A Static Circle?
Mar 8, 2005What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision.If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled.
View 6 RepliesActionScript 3.0 :: Graphics - Paint (change Color) Inside Of Circle When A User Draw A Circle
Aug 24, 2009I`m working on a app that you can draw lines.....like circles, rectangles... my problem is when a user draw a circle for example....i wanna be able to paint (change color) inside of this circle. I`ve tried working on Shapes with cacheAsBitmap = true and Bitmaps with BitmapData but it doesn`t seens to work.
View 4 RepliesActionscript 3 :: Change Shape Of Circle By Dragging Point On Circle
Mar 16, 2012I want to create circle, and put 8 points on it. So, user can drag each point in order to change it's shape.
Is there any way to do this in flash?
I have some following code:
Ref. - How to draw a continuous curved line from 3 given points at a time
package{import flash.display.Sprite;
import flash.events.MouseEvent;
import flash.geom.Point;
[Code].....
So, can anyone convert these three point curve line to 8 points circle?
ActionScript 2.0 :: Drawing A Circle - Circle Diameter Has To Be Controlled By A Button
Oct 6, 2009I have to draw a circle using action script. The Circle Diameter has to be controlled by a button.
View 0 RepliesActionScript 3.0 :: Circle Circle Frame Independant Collision Reaction?
Apr 10, 2010Trying to do circle circle collisions via math which I'm really having trouble with. One circle (player) just moves from keyboard. The ball reacts to the player. All the code shown is in my players class and I passed in a reference to the ball.
On my enterframe I have:
Code:
var xmov1 = xSpeed;
var ymov1 = ySpeed;
var xmov2 = ballRef.xSpeed;
var ymov2 = ballRef.ySpeed;
[code]....
Perhaps I'll go with a box2d equivalent instead of trying out my own physics shenanigans.
ActionScript 2.0 :: Start Drawing First Circle And When First Circle Is On Half Way?
Sep 19, 2004Here I what i need is : Start drawing first circle and when first circle is on half way, Start second circle.same way second and third circles. and after completing 3 circles, just gotoAndPlay 2nd Frame .
View 3 RepliesActionScript 3.0 :: Add MovieClips Between Others Evenly Spaced
Feb 13, 2010I have two movieclips, I have managed to calculate the distance between them. The problem is I now need to figure out how to add movieclips between the distance of the two movieclips and if I add more than one movieclip they need to be evenly spaced and all should follow a straight path from the two original movieclips.
ActionScript Code:
var numOfItems:Number = 5;
var pnt1X:Number = pnt1.x;
var pnt1Y:Number = pnt1.y;
var pnt2X:Number = pnt2.x;
var pnt2Y:Number = pnt2.y;
[Code] .....
Professional :: Circle No Longer A Circle On Publish?
Feb 18, 2010I have a simple three ring animation where the three rings fade in and out.On the stage the rings are a perfect circle, in the publish preview they look fine, but once I publish the SWF, all of the sudden the rings are not perfectly round anymore.
They are almost perfect but right at the top and bottom there is just a small portion which has sort of "flattened out"...
Professional :: Create A Circle With The Circle Tool?
Apr 26, 2011I bought a Flash video tutorial online for Animating and the FIRST step is to create a circle with the circle tool, and the guy does it online, and it fills itself in. I repeat his actions exactly and I cannot get the same result at all. I just get a circle.
View 5 RepliesActionScript 2.0 :: Moveable Circle Around Another Circle - No Overlap
Apr 5, 2007I have two MC's, circular in shape. One of the circles is stationary and you can drag the other. I'm trying to get the moveable circle to be able to move around the circumference of the stationary circle, but not overlap. I'm able to detect when they overlap, not using hittest. I just can't figure out how to code it so that the draggable circle can't be moved over the stationary circle.
View 4 RepliesActionScript 3.0 :: Circle-circle Collision With Rotation?
Jul 5, 2010Does anyone know of any tutorial or code example that deals with resolving circle-circle collisions including rotation?
View 2 RepliesActionScript 3.0 :: Constrain Circle In A Circle On Startdrag?
Jan 6, 2012I have been trying to get this right for hours now it cant be as hard as I am finding it! but basically I have a circle and in that circle is a circle and all I want is for the inner circle to not be able to leave its parent. that's it but I just cant get it to work.
View 1 Replies