ActionScript 3.0 :: Add MovieClips Between Others Evenly Spaced
Feb 13, 2010
I have two movieclips, I have managed to calculate the distance between them. The problem is I now need to figure out how to add movieclips between the distance of the two movieclips and if I add more than one movieclip they need to be evenly spaced and all should follow a straight path from the two original movieclips.
ActionScript Code:
var numOfItems:Number = 5;
var pnt1X:Number = pnt1.x;
var pnt1Y:Number = pnt1.y;
var pnt2X:Number = pnt2.x;
var pnt2Y:Number = pnt2.y;
[Code] .....
View 3 Replies
Similar Posts:
Feb 5, 2009
I have a few textField objects that are created dynamically with XML. I want to space them evenly horizontally, how would I do that? So far this is all I have, but it does not account for different character lengths per textField.
Code:
for (var i:int = 0; i < xmlList.length(); i++) {
var tf:TextField = new TextField();
[code]........
View 5 Replies
Apr 16, 2010
I am trying to duplicate a movie on the stage 4 times evenly spaced out
Actionscript Code:[code]..............
View 4 Replies
Nov 8, 2011
I'm working in Actionscript 3, but this is pretty general.I'd like to make a simple function that I can call, e.g. GiveCords(Width, Height, Num) that will take a width and height, map that out and using the Num variable place the given amount evenly across the space.Say I give it a value of 500, 500, 1. I'd expect it to return an X, Y position of 250, 250.But I'd like it to return an array of given points with X, Y.So If I gave it 10 points, it would find the best position for them all to be of even distance apart from each other.
View 1 Replies
Feb 11, 2011
I have the following code, which works beautifully when all the boxes are the same height. The basic point is that I have three boxes on the stage, 10 pixels apart. If you click and drag those boxes above or below each other, they reorganize themselves.
// based off Dynamic Stacking AS3 @ http://blog.soulwire.co.uk/code/open-source/dynamic-stacking
var mcArray:Array = [mcA, mcB, mcC];
var mcSpacing:int = 10;
[Code]....
View 4 Replies
Aug 16, 2009
How to "space evenly" movieclips in runtime usin actionscript?
View 2 Replies
Mar 9, 2011
Let's say I have array foo and a positive integer y, where foo.length > y.I want to remove elements from foo so that foo.length becomes y (or very close to it).Also, I need to preserve the first and last element of foo. The indices of the removed elements must be spaced apart as equally as possible. Foo can be sliced, or it can be used to create a new array.
Example: if foo = [a,b,c,d,e,f,g,1,2,3,4,5] and y = 6, then trimmedfoo could be [a,c,e,g,2,4,5] or maybe [a,c,e,2,4,5], but not [a,c,e,g,2,4] because the last element of foo is missing.
View 4 Replies
Oct 1, 2009
I am using he uiloader component to load 4 external swf's. But I've got a problem with spreading the uiloaders evenly on the stage when it resizes (with different browser sizes). How can I solve this to put the :
1 uiloader on 0% vertical axis
2 uiloader on 25% vertical axis
3 uiloader on 50% vertical axis
4 uiloader on 75% vertical axis
how to achieve this with AS3 code.
View 2 Replies
Aug 25, 2009
I am trying to figure out how to space evenly horizontally object of different width.
View 1 Replies
Dec 14, 2009
I often need to divide quantities in recipes. Normally, this is straightforward: I have an array of items to divide and a total, so I can do something like
[Code]...
However, this time I have been handed a curve ball: some of the items have a maximum amount they can be. For example, item A has a maximum amount of .25, item B is maximum of 1, the other items have no limits. So if the total amount is 3, and I am dividing it by 3 items I can't simply set each one's amount to 1 (as I normally would, as the code above does). I need to set the amount of A to .25 so there is still the .75 "left over" that I now need to apply evenly to the remaining items.
So that means the other 2 items B and C would be 1.375 each -- but, as I said above B also has a limit (of 1), so B would be 1 and C (no limits) would get the whole .75 remainder, and be 1.75. So A=.25, B= 1, C=1.75 for the total of 3. My question is, even conceptually, how would I approach a problem such as this in AS?
[Code]....
View 1 Replies
Jan 14, 2010
In need of a function to match the functionality of Flash's Align tool to "space evenly horizontally" between either two objects or to the stage.
here is a template of a function that I have been playing with:
ActionScript Code:
public function spaceEvenlyHorizontally(objects:Array,toStage:Boolean=false,obj1:DisplayObject=null,obj2:DisplayObject=null):void{
[Code].....
View 1 Replies
Jun 9, 2009
I have a round workfield and want to place 10 items evenly divided around the border. So basically I want to spread 10 items over a circle (not a line).
View 12 Replies
May 26, 2010
I am working on The ausdcf.org to try adding several banner ads in swf format to the top. The client chose not to go with Google AdManager, but prefer a "minimal approach" to do this task. What I am trying to do is sort of "mimicking" the way Google AdManager does for banners, that is, to split the chance of each particular swf to be shown to the visitor evenly among the banner collection.
Definitely I can add some jQuery code to do this from client-side, a random number generator and if-else statement would work - just $.load() it However, what if I'd like to make sure those disabled Javascript (is there any now btw?) still be able to see different swfs in each visit.
View 1 Replies
Jul 14, 2010
I have 16 columns in a DataGrid in my Flex app. The first 15 look fine, with the column, simply containing the text, but the last one has a lot of extra space. Essentially, the columns are just big enough to fit the first 15 and all that extra space is tacked onto the 16th column.
How can I evenly distribute the space over each column?
<mx:DataGrid x="127" y="9" id="view"
dataProvider = "{currentBuffer}" width="497" height="480">
<mx:columns>
[Code].....
View 2 Replies
Aug 4, 2010
What im going to be doing is replacing the bottom info with just a link-strip, unfortunatly I didn't want to have to sift through ten dynamic text fields re-animating every one with tweens to the way I wanted them so I set them all to a parent variable defined as "mt", such variables being as follows:HomePortfolioDocumentationDev BlogCase StudiesSupport For
View 4 Replies
Dec 3, 2010
First, just to give a visual idea of what I'm after, here's the closest result (yet not exactly what I'm after) image that I've found:[URL] BUT, it doesn't exactly solve the problem I'm after. I would like to store an array of points of a very specific spiral algorithm. The points are evenly distributed The 360 degree cycles have an even gap If I'm not mistaken, I think it's obvious that the two first points would be:
[Code]...
View 2 Replies
Oct 17, 2011
iSo let's say I have three different arrays of objects, and I want to combine them into one sorted array. I want the order to be such that the items from each array are evenly distributed throughout the sorted array.
If there were 3 xItems, 3 yItems, and 3 zItems, the sorted array would have this order: x, y, z, x, y, z, x, y, z
HOWEVER, even if the arrays are differing lengths, I still need to make them alternate as much as possible. If there were 6 xItems, 4 yItems, and 2 zItems, the sorted array should have this order: x, y, x, y, x, z, x, y, x, y, x, z
View 1 Replies
Oct 3, 2011
I have been tasked with trying to create a drawing tool that draws dotted lines as you drag the mouse across the stage. I can easily capture the points on MouseEvent.MOUSE_MOVE and store them in a vector and then draw the points as dots:
The problem is that I need to calculate evenly distributed points on an ever growing Vector of points so I can only draw the line between say every 5th point (say using modulus). I have been battling away with Bezier curve equations both Quadratic and Cubic but still can't quite figure out how to convert my Vector of points into an evenly distributed Vector of Points without sucking the life from the CPU.
View 1 Replies
Aug 6, 2010
I m trying to make sense of how to load a swf into a parent MovieClip and allow them to communicate.I ve attached two zip files � one which works fine and the other doesn�t. Unfortunately (for me), the one which doesn�t work is closer to my current project.I need to load movieclips into the parent movieclip. The parent movieclip has controls which rely on values parsed from the child movieclip.In the parent movieclips I wait until the loading is complete and so the values should be passed. However, the values aren�t passed unless I use a button (or timer), to pass the values (see the working exampes).The code which doesn�t work is:
Parent movieclip:
ActionScript Code:
stop();
var myLoader:Loader = new Loader();[code].............
View 5 Replies
Dec 19, 2009
I have two SWF-Movies. One is exported into eht other as Child.Can I instance the Objects of the two libraries in all places, where ActionScript is possible? (In Keyframes of the MovieClips and in external class definitions.)
View 3 Replies
Sep 9, 2011
Looking for a way to stop all movieclips both are the stage and that are children of the ones on the stage.
I toyed with looping thru stage's children so I can first target clips on the stage. But I am getting error.
for (var i:int = 0; i < this.numChildren; i++) if (this.getChildAt(i) is MovieClip)
{
this.getChildAt(i).stop
}}
View 5 Replies
Feb 5, 2009
I have created 25 MovieClips on the stage in 5 X 5 matrix.How can I treat 5 movieclips in each row as a group of movieclips so that I can apply same set action to them?(Similar to RadioButton functionality. )
View 6 Replies
Sep 15, 2010
Printing an MC is easy enough. But I am having trouble printing an MC which has multiple MCs inside of it. They just don't get printed.
I am trying to avoid printAsBitmap.
View 5 Replies
Oct 21, 2010
I want to test mc animations without having to hit F12 to see if they work correctly. For instance, if I have an animation movieclip and then I make another movieclip and drop that aforementioned movieclip within, and animate [via the timeline or library preview] I'm unable to see on-the-fly what my animation looks like... it only shows the top most nest, unless I F12 it.
So if I have a character blinking eyes (one movieclip) and then I create another movie clip of the face, and put that aforementioned movieclip within, the preview animation within the library does not show how it'll be viewed when F12'n it.,,,, it'd be great to see your animations on the fly.
View 1 Replies
Oct 30, 2007
why does a MC inside another MC have different _x and _y values than the main timeline?What I am trying to do right now is animate a MC inside another MC then get the main MC holding everything to move where that new MC ended animating at (it's part of a game I'm making.)
I know it's confusing but Flash shows the cursors current X and Y in the info panel, which is the same as the main timeline. Yet inside the movieclip, an x of 76 and a y of 277 on the timeline is -195 and -30.9 (respectively) inside the MC.How do I fix it so I can get the _x and _y values to match up so I can tell the main MC to reposition itself to the new X and Y (of the inside MC)
View 1 Replies
Mar 27, 2008
I have a movieclip called mapWindow, inside mapWindow are dynamically created movieclips of various sizes. The movieclips inside the mapWindow don't take up the entire space of the mapWindow and thus I use a startDrag on the mapWindow upon detection of a mouse press. The problem is, I don't want the start drag to start if the mouse is detected over any of the child movieclips inside mapWindow.
I have a few ideas of how to proceed, but I'm not sure how to reference all child movieclips of a particular movieclip - or something along those lines.
It would be easy to use the hittest function if I knew how to reference all the movieclips I need to, but alas...
View 1 Replies
Nov 20, 2009
Using Flash CS4 - AS 3.0
how to control a movie clip using a separate movie clip.
on scene 1 (2 frames long), i have 2 movie clips.
-bFind (24 frames long)
-textEffects (14 frames long)
i want to jump to frame 7 of the textEffect movieClip when i hover over bFind
i have my AS code in the first frame of the movieClip called "Bfind"
Code:
stop();
addEventListener(
MouseEvent.MOUSE_OVER,
[Code].....
View 5 Replies
May 5, 2010
I'm using flash MX 2004 Professional. What im trying to is the following: I have 9 movie clips, each has a "closed" and "open" state. Basically, when I click no.1 I want it to animate open, and then, when I click no.2, it must first check if any of the other clips are in their "open" state and if so, close them. I've worked with the following, but it doesnt seem to be working:
[Code]...
View 4 Replies
Oct 5, 2008
I am still transfering from AS2 to AS3 and right now i am having a very annoying problem. THE STRUCTURE:
Maintimeline contains 2 buttons that i want to use to access children in a bunch of movieclips. rectangle_mc has circle_mc circle_mc contains xx_mc xx_mc contains wtf_mc placed on frame 1 on maintimeline Why can't flash see my nested movieclips? I remember in AS2 you could go down the line:
[Code]...
View 15 Replies
Jul 30, 2010
I am starting with AS3 programming icm with Flash Builder 4.I have created a "Main" class which is the initial stage.On this stage there is a movieclip called mcMain.In this mcMain is 4 other movieclips: mcStats1 mcStats2 mcStats3 mcStats4 .How can I access these mcStats1-4 from the code to make them go to another frame?I tried:
var t:MovieClip = MovieClip(getChildByName("mcMain"));
t.getChildByName("mcStats1").gotoAndPlay(3);
But that just keeps giving me null reference errors:TypeError: Error #1009: Cannot access a property or method of a null object reference.
View 4 Replies