I'm using flash MX 2004 Professional. What im trying to is the following: I have 9 movie clips, each has a "closed" and "open" state. Basically, when I click no.1 I want it to animate open, and then, when I click no.2, it must first check if any of the other clips are in their "open" state and if so, close them. I've worked with the following, but it doesnt seem to be working:
[Code]...
Using Flash CS4 - AS 3.0
how to control a movie clip using a separate movie clip.
on scene 1 (2 frames long), i have 2 movie clips.
-bFind (24 frames long)
-textEffects (14 frames long)
i want to jump to frame 7 of the textEffect movieClip when i hover over bFind
i have my AS code in the first frame of the movieClip called "Bfind"
Code:
stop();
addEventListener(
MouseEvent.MOUSE_OVER,
[Code].....
Is there a way to reference multiple movieclips using a single variable name? For example,I'm making a side-scrolling game, and there's going to be many platforms, and I have some code that tells the player not to fall through these platforms, but I don't want to copy and paste the same "platform" code every time I add a new platform.
View 3 Replieson my main timeline there is a movieclip ("sampleMc") which contains a number of labeled frames containing movieclips of gallery images (for example "dyerBikiniMc"). in turn, each of THESE movieclips contain a number of frames of detail shots of the main image (for example "dyerBikini00Mc, dyerBikini01Mc, dyerBikini02Mc, etc.").on the main timeline i have a gallery navigation bar with thumbnail buttons determining which image will be displayed. there's also a right arrow shaped button "detailsBtn" that i'd like to allow the user to click frame-by-frame through the detail shots of the image. i also have a before/after toggle button on the main timeline that needs to control the movieclip one level below that, where the before/after images of that particular detail shot are stored!
View 9 Repliesis there any way to control the brightness of a movie clip or button on mouse roll over so that it gets brighter when the mouse is on it? I could only find things for earlier versions of AS and i couldnt figure out how to change them..
View 1 RepliesI have a movieclip on the main timeline with instance name "rpm_display". Inside that movieclip I have another movieclip with instance name "dial_graphics". My actionscript is on this timeline. The tween that uses "dial_graphics" drives "rpm_digital.rpm_counter.text" to compute a value based on the tween position of "dial_graphics".
I need to move the movieclip "rpm_digital.rpm_counter.text" outside of movieclip "rpm_display", but it will not work when its on the main timeline. I have tried having it on the main timeline and putting the actionscript there too using "rpm_display.dialgraphics", but this did not work...
should i use _parent? Not too familiar with AS3.
My CODE:
stop();
import fl.transitions.Tween;import fl.transitions.easing.*;import fl.transitions.TweenEvent;
[Code]....
I am trying to figure out how to control 3 movieClips on the screen via XML. I can successfully control one, but I want to control all 3 if the XML has the values.
Here is my code:
var ducks:Array;
var myLoader:URLLoader;
var i:uint;
var xPos:int;
var yPos:int;
var myXML:XML;
[Code] .....
I think I would need to create some sort of list for each specific node (arrayPos, xPos, yPos, isvis) and then run a for loop so that each movieClips values get assigned properly. I have uploaded the .fla and XML for anyone who wishes to view it.
I have a beginner question, apologies for rusty language and incorrect references.I have 3 movie clips on the stage. Their identifiers are 'dim', 'bright' and 'source'. What I want to happen is when the user clicks on the 'dim' movie clip, the alpha of the movieclip 'source' is set to 20. So I tried to write the following:
onClipEvent(mouseDown)
{
_root.source._alpha=20;
[code]......
How do I control the timeline from a movieclip from within itself?I made a menubutton for a school assignment. To make it, I created a movieclip of the button's graphic, with on the second frame the button again but with the menu open (haven't added anything in it yet).Opening the menu is as easy as
Code:
menu_mc.addEventListener(MouseEvent.CLICK,openMenu);
function openMenu(evt:Event):void{
[code].....
I have an animation of a spinning globe made from 2 maps placed back-to-back and a circular mask over them. The animation loops endlessly to simulate a spinning globe. This animation was made into a movieclip (globeSpin) which is nested inside another movieclip ontainer_mc). I want to stop the spinning effect when a user mouses over and start it up again when they mouse out. Code is below:
Code:
container_mc.addEventListener(MouseEvent.MOUSE_OVER, stopSpin);
container_mc.addEventListener(MouseEvent.MOUSE_OUT, startSpin);
[code]....
I have created 3 movieclip buttons which have a total of 3 states eachUP, OVER and Pressed.What i am wanting to do is create a fuction that will change the state of an already pressed button back to its UP state. For exampleButton one is press and will stay in its state untill button 2 or 3 are presses then it will revert back to its up state.My way of tackling the problem was to target a frame in the movie clip that I wanted to change such as this:
on (rollOut) {
gotoAndPlay("ee");
}
[code].....
Instead of a scroll bar just controlling one movieclip..How could we get it to control multiple movieclips?
public class MainScroll extends Sprite
{
//private var mc_content:Sprite;
[Code].....
I need to dynamically attach a movieclip from a library and then make it move across the screen.This is quite easy for one movieclip instance, but what I need is to have movieclips spawn at regular intervals then move accross the screen.[code]My question is, how do I continuously attach movieclips without making so many variables? Is my method of attaching even alright for this purpose?
View 2 RepliesI'm working on a picture of cell phone, which I want users to be able to click on the number pad and have the numbers appear on the screen. Seems simple enough but I'm having trouble making the numbers appear in order just like phones in real life do. For instance, the screen starts with four *'s until "1" is clicked, then when the next number is clicked(let's say 3) I want the screen to display "13**" and so on.What I have is a movieclip with 11 frames (* and numbers 0 to 9), and 4 copies of them are each named p1,p2,p3,p4. They would be on the cell phone "screen" and display numbers clicked by the user. Then I have buttons acting as number pad with actionscript as follows:
ActionScript Code:
//for button "1"
on (release) {
[code].....
Background: Written a basic flash animation where a number of buttons control 8 signs, and each sign can have 3 different 'faces' There isn't one button per face, as each button can affect multiple faces. (i.e. button a changes signs 1 and 5 to faces x and y, button b changes signs 2 and 6 to faces q and z, etc)Each 'face' is made up of multiple 'sections', a bit like the rotating advertising boards or motorway signs, like this:(can't post links, don't have enough posts. Go to google images and search for this:rotapanel the_southit should be the first resultThis part isn't the problem, it works by having each 'section' as a separate symbol, and face symbols made of of either 4 or 5 of these section symbols. As the buttons are pressed, I hide and make visible the appropriate faces, and everything is good. The idea is that I can easily customise it later by switching out the underlying section symbols to update the whole thing, or create new 'faces' by combining the sections in different combinations. All nice and modular.
Now the problem: In order to try and make the thing look more realistic, I decided to animate the transition between faces by rotating the sections as vertical prisms (think of 4 or 5 toblerones stood on their ends, placed together to make a single surface. If you rotate them all about their centre points at the same time, you can create up 3 different 'faces').The animation is done and works fine, but the problem is controlling it. At the moment, each 'face transition' structure is this:
Face Trans. - Section Name(1) : Spin out animation: Static Graphic
________________________________Spin in animation: Static Graphic
____________- Section Name(2) : Spin out animation: Static Graphic
[code]......
I have a few movie clips running swf's and I need a play/stop button in one clip to control the audio in another clip. The buttons are in the _root clip and the audio is contained in an swf I load into an empty 'content' movie. I have labelled the frame containing the audio but can't seem to use the object hierarchy to access it. On a somewhat similar note, is there a way to have the root movie display the bytes loaded/bytes total of a swf loading over top of the root movie, i.e. in a content empty movieclip?
View 1 RepliesI have a movie (back.swf) and this calls into another (menu.swf, level20). I want to control the movie clips to the level0 with the buttons on level20. I do that but I can't control in a random order.
For example:
I press button 1 and play movie clip 1.
I press button 2 and play movie clip 2.
But if I press again button 1 don't play it.
And if I press the button 3 play the movie 3 but don't allow to return to the button 1 and 2.
Every movie clips are in level0.
I have a compiled swf File (lets call it "cat.swf") that is loaded via the Loader Class of my Main movie. The cat appears without problems. But inside cat.swf there are two movieclips defined (lets call em "head" and "body"), and I have ye to find a way to get control of these from my Main movie.
When I check for numChildren of the loader Object it only gives me back one (an unnamed instance), if I cast that as a Movieclip to check for deeper children it continues all the way down like a tower of turtles.
I'm having some trouble with the attached file, I've tried lots of things but just can't seem to control the movie clip. On click on 'Detailing' from the landing page a new slide *slides onto the stage 'content3'. Within this I have added a separate graphic with a tween 'gr_detailcopytest'. I want it to start only when it lands within the main stage's masked area. I also want the tween to stop too after its played out. I have tried adding a stop action at the end of the tween but this stops the tween altogether - Furthermore, when I click on another menu item and go back to 'Detailing' I want the tween to start again.
View 6 RepliesI'm just starting to learn as 3.0, and was having problem understanding the scenes, timeline (stage, root) and movieclips.
Basically now I have two scenes: S1, S2
S1 has one mc: round_mc ; S2 has one mc: rect_mc
And I have same set of control buttons: play, stop, prevFrame, nextFrame, prevScene, nextScene, gotoAndStop()
The control buttons worked with the round_mc in S1, but didn't control rect_mc when S2 is playing. Why same set of buttons doesn't work in all scenes. Should I have to assign a variable to detect movieclips on the current scene...
Code:
import flash.events.MouseEvent;
import flash.display.MovieClip;
prevS_btn.addEventListener(MouseEvent.CLICK, preScene);
nextS_btn.addEventListener(MouseEvent.CLICK, nexScene);
prev_btn.addEventListener(MouseEvent.CLICK, preframe);
[Code] .....
here's my code:
Code: Select allvar arrThumb:Array = new Array();
for(i=1;i<=10;i++){
arrThumb[i] = "thumb_mc"+i;
[code]...
THE CODE ABOVE DOES NOT WORK ,I want to create 10 moveiclips each with unique name, which I can move around or maybe load things into later. At the moment the trace returns 'undefined' so the movieclips aren't even being created.
I'm basically making a step-by-step tutorial. There is a nav section of just 2 buttons, one for the "previous step," and the other for the "next step."
Just to make it easier (or maybe not...) I've named all instances of my movieclips "mc1" "mc2" etc... And I've created ActionScript that notes what "page" you're on, and using a for loop, makes the movieclip that corresponds to the current page (page #2 >> mc2) visible while at the same time making every other movieclip invisible. I've got all of that working properly.
What I need to fix is... Say you view the first step's movieclip, and you go on to the next step, but then want to go back to the previous step to watch it again... What you'll see is the last stopped frame of that movieclip rather than seeing the entire animation over again.
You'll be able see what it's doing in the code...
Code:
stop();
// Declare variables
pageNumber = 1;
maxPageNumber = 12;
[Code]....
I know that I can use setProperty to reference something like "mc"+i, but can I do the same thing with play()? Obviously "mc"+i.play(); doesn't work...
I have a spreadsheet represented with three bitmaps within mcs. I'm using an mc with four directional buttons to allow scrolling (x and Y). The complication comes when I want the header to move on the x axis, but not the y axis. Also, I've got an mc with the row title column and I want that to move on the y axis, but not the x axis. This should be easy, but it is not for me. I've tried using an array, but with my onEnterFrame/incremental movement, how to break out of the onEnterFrame. I've also tried a function call as seen below. I can get things to move, but not quite right, tweaking only makes things worse. This one will move both of my mc's on the y axis, but only after clicking three times. The on the reverse trip, the mc moves jumps up and then increments correctly, only with that initial jump offset.
Let me show you my code (these variables are supplied by the loaded MC):
Code:
_level0.maxDown = -271;
_level0.stepY = 140.334;
_level0.maxUp = 150;
_level0.maxRight = -323;
_level0.maxLeft = 0;
[Code] .....
There is a nav section of just 2 buttons, one for the "previous step," and the other for the "next step."
Just to make it easier (or maybe not...) I've named all instances of my movieclips "mc1" "mc2" etc... And I've created ActionScript that notes what "page" you're on, and using a for loop, makes the movieclip that corresponds to the current page (page #2 >> mc2) visible while at the same time making every other movieclip invisible. I've got all of that working properly.
What I need to fix is... Say you view the first step's movieclip, and you go on to the next step, but then want to go back to the previous step to watch it again... What you'll see is the last stopped frame of that movieclip rather than seeing the entire animation over again.
You'll be able see what it's doing in the code...
Code:
stop();
// Declare variables
pageNumber = 1;
maxPageNumber = 12;
[Code].....
I know that I can use setProperty to reference something like "mc"+i, but can I do the same thing with play()? Obviously "mc"+i.play(); doesn't work...
I am sure that this code can be optimized so I don't have to type 8 instances (only 2 shown) of the (almost) same code.
kabinet.onRollOver = function() {
this.fleka._alpha = 70;
this.izlaz=false;
} kabinet.onRollOut = function() {
this.izlaz=true;
[Code] .....
What I am aiming for is to have a way to pass "kabinet", or "operativni" etc. to a function or smth... The code is used to control mc buttons on the stage. It works, but it's ugly and not practical, obviously. I tried with
[var]onRollOver = function() {
Inside a function, var being the parameter of said function ("kabinet", "operativni" etc.), but to no avail. Also tried with the with(var), thingy, but with the same result.
I'm starting to learn actionscript 3 programming and am in the process of trying to create a simple game but am having trouble getting flash to call up various movieclip states.I have a movieclip called "Player" and inside that movieclip, I have Player_Stand,Player_Hit, and Player_Walk...
While I can get the master movieclip to move, I can't get it to play the embedded movieclips when I change states. I tried a more advanced method that did work where you stick all of the animations in one movieclip and then manually tell flash to advance each frame using gotoAndStop in a loop, but it would be easier to just have seperate movieclips that I could just call from a master movieclip file. I've tried various methods to solve this including having all of the movieclips on screen and then changing their visibility but that didn't work either.
[Code]...
how to communicate with those clips specifically to make them draggable and also to change the _rotation with Key.Right, Key.Left.
View 7 RepliesI found the tutorial on duplicating movieclips, especially the line-by-line translation of the code. how to communicate with those clips�specifically to make them draggable and also to change the _rotation with Key.Right, Key.Left.
View 7 RepliesI m trying to make sense of how to load a swf into a parent MovieClip and allow them to communicate.I ve attached two zip files � one which works fine and the other doesn�t. Unfortunately (for me), the one which doesn�t work is closer to my current project.I need to load movieclips into the parent movieclip. The parent movieclip has controls which rely on values parsed from the child movieclip.In the parent movieclips I wait until the loading is complete and so the values should be passed. However, the values aren�t passed unless I use a button (or timer), to pass the values (see the working exampes).The code which doesn�t work is:
Parent movieclip:
ActionScript Code:
stop();
var myLoader:Loader = new Loader();[code].............
I have two SWF-Movies. One is exported into eht other as Child.Can I instance the Objects of the two libraries in all places, where ActionScript is possible? (In Keyframes of the MovieClips and in external class definitions.)
View 3 Replies