I found the tutorial on duplicating movieclips, especially the line-by-line translation of the code. how to communicate with those clipsļæ½specifically to make them draggable and also to change the _rotation with Key.Right, Key.Left.
View 7 Replieshow to communicate with those clips specifically to make them draggable and also to change the _rotation with Key.Right, Key.Left.
View 7 RepliesI have a project which will allow the user to upload an image, drag it within a certain area, and rotate it.The trouble is, that the user is allowed to rotate the image. When they do, then because the area is defined by the width of the rotated image, then the image will not go as far as it's boundary,or it will cross over it's boundary.I have searched the web for a solution, and have found nothing.I am currently thinking it has something to do with Math.cos() or Math.sin()Here is my current code(which doesn't work):
r = mc._rotation;
mc._rotation = 0;
w = mc.clip._width;
h = mc.clip._height;
[code]....
how do i change an object's _rotation based on the xy coordinates of another object (so it is facing it)?
View 3 Repliesam attempting the following:1) Draggable duplicate move clips (got this working fine)2) Reset button to remove all instances of the duplicated movie clips (can't figure this out)
Here is my code so far:
for(i=0;i<100;i++) {
duplicateMovieClip(IED_mc,"IED"+i,getNextHighestDe pth());
[code]......
I have a mc that is added to the stage. It extends a dragdrop class. How can I duplicate it so the orig stays where it is and the duplicate is draggable.
View 9 RepliesIn my scene I've got a movieclip. If I press left the same movieclip should be duplicated a distance left of the first movieclip. If I press right, one should appear to the right of the first movieclip. If I press left again another duplication of the movieclip should show up on the left of the copied one on the left...
View 4 RepliesI've got 6 draggable movie clips that snap to a target - which works fine. If they don't hit the target area they snap back to their starting point- which also works fine.
My problem is that they can all be dragged to the target one after another, but I only want one movieclip to be at the target at any one time.
So,when I start dragging a new clip toward the target I want the movieclip thats already on the target to reset itself to it's starting position, thus being replaced by the incoming clip.
I want this to happen for all the draggable clips.
function dragSetup(clip, targ) {
clip.onPress = function() {
startDrag(this);
this.beingDragged=true;
[Code].....
When you click on a movieclip in the menu, it is then copied and added to the container_mc movieclip.
My problem is that I can't figure out how to make the movieclips draggable once they are in the container_mc.
I tried the following as a test but its only working for the existing movieclip, not the new one like I want it to[code]...
I am basically trying to duplicate a movieclip by using a button.. (no probs there).however, i want to drag each movie clip individually.. ( my brain froze)here is my butchered code..// graphic is the mc i wanna drag, n is the textfield that i want to count up.
on (press) {
addmore = "graphic" add n;
duplicateMovieClip("graphic", addmore, n);
[code]......
How do I rotate my gradient around so its not always a left/right gradient? What value do I manipulate? I want to learn how to rotate to specific angles.
[Code]...
I have a big circle with buildings all around the edge. There are two buttons that should control it. One to rotate the circle left, and one to rotate the circle right. I'd like each click of a button to rotate the circle and have it stop on a building, which then would activate an animation of the building.
View 4 RepliesActionScript Mobile Project.
Flash to IPad.
I am using Flash Builder 4.5.1
I have a row of movieclips that I need to drag horizontally. there could be up to 300 clips. Each clip is 100 px wide. Each clip has different content/text and animations. the viewable area will be the stage.[code]...
Using Flash CS4 - AS 3.0
how to control a movie clip using a separate movie clip.
on scene 1 (2 frames long), i have 2 movie clips.
-bFind (24 frames long)
-textEffects (14 frames long)
i want to jump to frame 7 of the textEffect movieClip when i hover over bFind
i have my AS code in the first frame of the movieClip called "Bfind"
Code:
stop();
addEventListener(
MouseEvent.MOUSE_OVER,
[Code].....
I'm using flash MX 2004 Professional. What im trying to is the following: I have 9 movie clips, each has a "closed" and "open" state. Basically, when I click no.1 I want it to animate open, and then, when I click no.2, it must first check if any of the other clips are in their "open" state and if so, close them. I've worked with the following, but it doesnt seem to be working:
[Code]...
I want to know if it is possible to use javascript, flash or flex to make a youtube video player that is capable of controlling left/right audio channel volume. For example, mute the left channel and play right channel audio on both left/right speakers.
View 1 RepliesI am designing a flash game and I am having a bit of trouble with the Actionscripting, I wondered if you might be able to help me? I will try and explain how the game should function and I attach a JPG that shows the rough layout as well, hopefully from that you may be kind enough to point me in the right direction.
How it should function The idea is you have a glass that you control, left and right keyboard arrows control left and right movements and it only moves on the _x axis and the _y axis always stays at it's current value, this works fine and I have managed to add actionscript to the glass movieclip to do this, the movement also has gravity and friction which means the glass slides on a little even when you move to go the other way.
Using the Glass you need to collect falling object movieclips, there are two types, good and bad. When you catch the good it adds to your score and when you catch the bad it deducts from your score.
The falling objects need to be random and I have successfully managed to get 1 movieclip to fall by using actionscript code and also I have managed to set the _x position as random each time , the actionscript to do this has been applied to the falling object.
[Code]...
I only started yesterday with no knowledge at all.How do you make draggable items? I looked around and I saw things about actionscript and all that but what do you do?
View 5 RepliesI have 4 buttons which i have to make them draggable. The problem is that i have 3 conditions
condition #1. Only 1 button/mclip is draggable in its axis [done].
condition #2 .The 4 button/mclip must be dragabble at the same time, that is, when i drag one, the others should drag at the same time in their own axis.
[Code]...
I'm trying to hitTest two duplicate movies clips. One is a bullet and the other is an enemy. I have them properly duplicating, but I cannot figure out how to detect a collision between the two. I've trying everything I can think of, and so far I've only been able to get the hitTest working between the original enemy and the bullet duplicates.Here is the code for duplicating the enemy:
Code:
bb++;
duplicateMovieClip(_root.target, "t"+bb, bb);
[code].....
I have created an external class for a particular movieclip and I would like to link a duplicated version of this movieclip to the same class file.
Problem is I can't seem to do it. Even if I state the class as the BASE class of the new movieclip and create another random class name for it.
Is there a way I can get around this so I can assign my duplicated clip the same class name ??
I've created movieclips that duplicate and swap depths but I can't seem to get them to rotate. I want the mc to rotate when the rotate button is clicked. I have created a button file that executes the rotate function properly but I can't make it swap depths like the others. How can I get all of the functions into each object?
View 2 RepliesI'm currently trying to make a cross-hair shooter game with an additional onstage character so that you not only shoot the AI, but also dodge using the arrow keys. The problem is, I have a code saying that if the AI hits the player unload the player, the AI, and the AI duplicates. The player and the AI are unloaded, but the AI duplicates are not! I tried fiddling with the code but just can't get it to work.
[Code]...
I have yet another "I die-problem", not so drastic this time, though. I've only tried to solve it for two hours or so,it's killing me Well, as usual, I end up here, at the Kirupa forums.. and of course, l end up emptying the coffe-machine at work.. *runs for more espresso* It's an issue regarding the duplicateMovieClip function. I know how it works, and I know how to duplicate MovieClips using the function, however, I do have an issue figuring this out: Now, explained roughly:I have a MovieClip which contains yet another MovieClip. I want to duplicate both the MovieClip and it's child, but I want it to stay inside the parent MovieClip, just as the original MovieClip contained the original child.
View 13 Repliesi found this file a while back ("dynamic_rotation") and i would like to rewrite it to place all the code in the _root on it's own layer.the duplicated squares don't move.here is the original code on the mc:
onClipEvent (load) {
y=100;
Angle_Inc=12;
[code].....
I just started making some simple banners for web sites. I got a new one to do this morning, and I was asked to make a button that says drag/pull here. as you drag/pull down, it reveals the layer below it. Also, as the button reaches halfway, it needs to go all the way automatically as well, so the users don't have to drag all the way down themselves. Is that something I need to do in actionscript
View 3 RepliesI give my users the ability to create items. The Create item dialogs such as:
<s:Panel id="postitNoteCreatePanel"
horizontalCenter="0" verticalCenter="0"
...
How can I make panel draggable so that users can move it around the page so it doesn't block other items
I'm just trying to simply make a movie clip draggable (it was all oh so easy in AS2!) I'm getting "1120- access of undefined property "waves_mc"). Yes, I have the clip named waves_mc.
View 9 RepliesI want to have a draggable input textbox on the stage (it will b placed ontop of an image of a tshirt).I want the user to be able to enter text and then move the textbox around to where they want it on the tshirt.I know how to make a movieclip draggable, I have been using this:
PHP Code:
on (press) {
startDrag(this, false, 240, 90, 290, 290) // target, lockcenter, t, l, b, r
[code]......
that how can i duplicate a movieclip to as much numbers i want through out the stage using actionscript2. i have searched lots of posts in sites but i can't get it
View 6 Replies