I have 4 buttons which i have to make them draggable. The problem is that i have 3 conditions
condition #1. Only 1 button/mclip is draggable in its axis [done].
condition #2 .The 4 button/mclip must be dragabble at the same time, that is, when i drag one, the others should drag at the same time in their own axis.
[Code]...
I have a MovieClip that has startDrag(). Inside the MC I have buttons, but when I click the buttons it wants to drag. How do I make the buttons clickable?
View 3 RepliesSomebody knows if is possible to control an draggable MC with a radio button option?
I want a static movie clip turns draggable only when I set on a radio button.
I have looked around for solutions to this problem and have come accross sombe but it still wont work.
Flash CS4 File: [URL]
square_mc is the draggable clip with the buttons inside, it is constrained to only move horizontally.
ActionScript Code:
buffer = 0 - square_mc._width + Stage.width;
square_mc.onPress = function()
{
startpos = this._x;
[Code].....
I have a draggable movieclip, mc_PI on stage in which I have another movieclip, mc_PIcontainer into which I load an image.I then place a few buttons, btn_Ant1, btn_Ant2, etc. inside mc_PI.mc_PI drags just fine within the bounds I specify, but I cannot click on any of the buttons that are located inside mc_PI.I need the buttons to be inside mc_PI, because I need them to drag along with the image located in mc_PI.mcPIcontainer.[code]
View 11 RepliesI have a movie clip on the main timeline in frame 1 that I named moveablekey. What it is supposed to be is a key for a map that you can move around on the map. When you scroll over/off the key it will hide/unhide the actual key. The key has some buttons that I want to allow to go to a different link when clicked. When I test the key without the code below it will work on the link and take me to the link, but when I put the code into the main timeline it stops the link from working. Here is what I think is happening: The code seems to make it so wherever I click on the movie clip it is doing the start/stop drag code and won't recognize the buttons within the movie clip. So is there a way that I can make just the header of the key to be clickable to start/stop the drag, but still move the entire key, and allow for the buttons to be clicked?
Code:
stop();
moveablekey.onPress = function(){
startDrag(this);
Mouse.hide();[code]..........
Basically I have button contained in a movie clip (scroller), I want to be able to drag the button up and down and get this to move some dynamic text. If you want to have a look at the fla: [URL].
Code:
on(press){
_root.nFlag = true
}on(release){
_root.nFlag = false
}
And this code for the mc:
onClipEvent(enterFrame){
if(_root.nFlag){
if(_root._ymouse <= 400 && _root._ymouse >= 0){
this._y = _root._ymouse
}}}
My problem is that this only moves the button up and down, and doesn't move the dynamic text. Plus when the mc is named scroller it seems to conflict with code and moving the button doesn't work.
I only started yesterday with no knowledge at all.How do you make draggable items? I looked around and I saw things about actionscript and all that but what do you do?
View 5 RepliesI just started making some simple banners for web sites. I got a new one to do this morning, and I was asked to make a button that says drag/pull here. as you drag/pull down, it reveals the layer below it. Also, as the button reaches halfway, it needs to go all the way automatically as well, so the users don't have to drag all the way down themselves. Is that something I need to do in actionscript
View 3 RepliesI give my users the ability to create items. The Create item dialogs such as:
<s:Panel id="postitNoteCreatePanel"
horizontalCenter="0" verticalCenter="0"
...
How can I make panel draggable so that users can move it around the page so it doesn't block other items
I'm just trying to simply make a movie clip draggable (it was all oh so easy in AS2!) I'm getting "1120- access of undefined property "waves_mc"). Yes, I have the clip named waves_mc.
View 9 RepliesI want to have a draggable input textbox on the stage (it will b placed ontop of an image of a tshirt).I want the user to be able to enter text and then move the textbox around to where they want it on the tshirt.I know how to make a movieclip draggable, I have been using this:
PHP Code:
on (press) {
startDrag(this, false, 240, 90, 290, 290) // target, lockcenter, t, l, b, r
[code]......
Is this possible at all? I have tried to use the startDrag method for dynamic text field but I still can not drag it. If I converted the dynamic textField into MovieClip symbol then it becomes draggable. But I had to keep it as dynamic textField object because I am also applying formats defined in textFormat object to that textField. If it is converted to MC symbol, then I can no longer apply textFormat. Is there any solution. Basically I want to be able to drag and change its text format for given textField.
View 1 RepliesA client of mine has seen this elastic menu box effect and has asked me to see if I can loosely recreate it. elastic box menu Does anyone know how to A; create it? or B; create a draggable elastic box and I'll go from there!!
View 12 RepliesI have a game where the user inputs text and this text is shown on different scenes. I used the following code, where 'input1_txt' is the input text box and 'output1_txt' is the dynamic text box where it is displayed:
Code:
textenter_btn.addEventListener(MouseEvent.CLICK,textdisplay);
var enteredText:String = "";
[code]....
I need to make Text box to be Draggable And Selectable
View 1 RepliesI'm new to Flash (sort of - I used it a bit back in 1999-2000, but it's changed a LOT since then). I'm making an educational game for my company that involves dragging labels from a word-bank to their correct position on a diagram. I want the kids to be able to drag any one of the five labels and move them to any one of five marked positions on the diagram. I'm using Flash CS5 with Actionscript 3. I used code snippets, so that each individual label has the following code associated with it:
[Code]...
Could you tell how the actionscript code would look like for such a job?
View 4 RepliesI have four points which all are dragable. I have a line beeing drawn between the points. Now I wonder if it is possible that when you are ready dragging the points and you have the rectangle you want, to stop dragging and move the whole rectangle. In some way make the drawen rectangle an object where you can get the height and width and coordinates. And move it. Can this be done?
PHP Code:
for(var i = 1; i <41; i++) {
this["point"+i].onPress = function() {
this.startDrag();
this.gotoAndStop(2);
onMouseMove = drawLines;
[Code] .....
I'm having a heck of a problem with the startDrag function in Flash right now. I'm trying to make a draggable and/or clickable curtain rope, which works now to a certain extent. When the user single clicks on the rope, it opens/closes itself. When a user clicks and drags the rope part of the way, it opens/closes itself the rest of the distance. A user can also click and drag the rope the whole way if they like. Everything does what it is supposed to when a user single clicks. If a user double clicks, the curtain is permanently draggable, which is obviously not what I'm going for.Variable used to determine whether the curtain goes up or down
drag = 1
// Starts the dragging[code].....
I'd like to create a bunch of objects which the viewer can move around and, at any time, click on some text [within that object] to go to an external URL.
I can get objects to be moved around and can create URL request.I don't know how to combine the moveable object with an external link: for example, a black square with some white text - the whole thing can be moved and the white text is a link [to the web page].
I have script like this to drag an object a1 to a different location for a matching exercise.
ActionScript Code:
a1.onPress = function():Void {
temp1 = a1._x;
[code].....
I'm currently trying to make the contents of a window draggable and disabling the scrollbars on it.
This is the code i got to create the window and add the contents to the window. The window creates flawlessly and the contents gets loaded too but i can't get the contents to drag by clicking on the contents itself.
Code:
zoom_win = mx.managers.PopUpManager.createPopUp(_root, Window, true, {title:page_url, closeButton:true});
zoom_win.createObject("ScrollPane", "zoom_pane", 0, {contentPath:page_url, _x:3, _y:31});
I want to make a draggable movie clip with an input text box in it. It's going to be a "Make your own comic" game, where you can type in the speach bubbles what you want the characters to say.
View 7 RepliesI would like to have in my Flex application the ability to post objects (for instance images or text items) where user can drag/drop for absolute positioning on the screen, resize it and rotate it (although not high priority). I'm wondering if there is a library that would do so out of the box or do you recommend implementing my own?
View 3 Replieshow to communicate with those clips specifically to make them draggable and also to change the _rotation with Key.Right, Key.Left.
View 7 RepliesI found the tutorial on duplicating movieclips, especially the line-by-line translation of the code. how to communicate with those clipsïż½specifically to make them draggable and also to change the _rotation with Key.Right, Key.Left.
View 7 RepliesI have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
I'm trying to make a menu that has onRelease buttons on top of onRollover buttons (the onReleases are on a separate layer from the onRollovers). The onRelease buttons take the user to different urls, and the onRollover buttons are supposed to allow different parts of the menu to appear.
The onRelease buttons work fine, but I can't get the onRollover buttons to work consistently. Sometimes the onRollover buttons will correctly advance to a different frame, and sometimes they "stick" and do not advance. The script has no errors and I've tried changing the sizes of the onRollover buttons (in case they were too large and the cursor was hovering over more than 1 at the same time), changing the order of the code for the onRelease and onRollover commands (in case the onRollovers were being superseded by the onRelease commands), and countless variations of the layers and frames.
I'm sure that you'll want to see the script, but I don't think that pasting it all on this post would be reasonable? So I've put the .fla and the .swf on this page for reference: [URL]
I am a new comer to flash and I have been teaching myself actionscript 2.0 and I am now trying to move to action script 3.0 this seems a dumb question but for the life of me i can't figure out how to make my buttons work.i am trying to have the user click at button that connects to a movie clips and plays the movie, the movie stops then goes to the next frame of animation.
View 1 Replies