I have created an external class for a particular movieclip and I would like to link a duplicated version of this movieclip to the same class file.
Problem is I can't seem to do it. Even if I state the class as the BASE class of the new movieclip and create another random class name for it.
Is there a way I can get around this so I can assign my duplicated clip the same class name ??
I am designing a flash game and I am having a bit of trouble with the Actionscripting, I wondered if you might be able to help me? I will try and explain how the game should function and I attach a JPG that shows the rough layout as well, hopefully from that you may be kind enough to point me in the right direction.
How it should function The idea is you have a glass that you control, left and right keyboard arrows control left and right movements and it only moves on the _x axis and the _y axis always stays at it's current value, this works fine and I have managed to add actionscript to the glass movieclip to do this, the movement also has gravity and friction which means the glass slides on a little even when you move to go the other way.
Using the Glass you need to collect falling object movieclips, there are two types, good and bad. When you catch the good it adds to your score and when you catch the bad it deducts from your score.
The falling objects need to be random and I have successfully managed to get 1 movieclip to fall by using actionscript code and also I have managed to set the _x position as random each time , the actionscript to do this has been applied to the falling object.
[Code]...
I'm trying to hitTest two duplicate movies clips. One is a bullet and the other is an enemy. I have them properly duplicating, but I cannot figure out how to detect a collision between the two. I've trying everything I can think of, and so far I've only been able to get the hitTest working between the original enemy and the bullet duplicates.Here is the code for duplicating the enemy:
Code:
bb++;
duplicateMovieClip(_root.target, "t"+bb, bb);
[code].....
I've created movieclips that duplicate and swap depths but I can't seem to get them to rotate. I want the mc to rotate when the rotate button is clicked. I have created a button file that executes the rotate function properly but I can't make it swap depths like the others. How can I get all of the functions into each object?
View 2 RepliesI'm currently trying to make a cross-hair shooter game with an additional onstage character so that you not only shoot the AI, but also dodge using the arrow keys. The problem is, I have a code saying that if the AI hits the player unload the player, the AI, and the AI duplicates. The player and the AI are unloaded, but the AI duplicates are not! I tried fiddling with the code but just can't get it to work.
[Code]...
I have yet another "I die-problem", not so drastic this time, though. I've only tried to solve it for two hours or so,it's killing me Well, as usual, I end up here, at the Kirupa forums.. and of course, l end up emptying the coffe-machine at work.. *runs for more espresso* It's an issue regarding the duplicateMovieClip function. I know how it works, and I know how to duplicate MovieClips using the function, however, I do have an issue figuring this out: Now, explained roughly:I have a MovieClip which contains yet another MovieClip. I want to duplicate both the MovieClip and it's child, but I want it to stay inside the parent MovieClip, just as the original MovieClip contained the original child.
View 13 Repliesi found this file a while back ("dynamic_rotation") and i would like to rewrite it to place all the code in the _root on it's own layer.the duplicated squares don't move.here is the original code on the mc:
onClipEvent (load) {
y=100;
Angle_Inc=12;
[code].....
that how can i duplicate a movieclip to as much numbers i want through out the stage using actionscript2. i have searched lots of posts in sites but i can't get it
View 6 RepliesI have a for-loop that creates instances / duplicates of a movie clip that works like a charm:
[Code]...
Then I position each instance- and I fill an array with the number ("pg"), because: I also have the option to switch to a different view and at that point I want / need the MoveClips to disappear. So I have a function tied to the switching that goes through a loop for all instances of the movieclip copies (using the array with the IDs from the example above) and remove them.
[Code]...
I was wondering how to have collision detection between two differente duplicated movie clips. For example, a duplicated bullet hits a duplicated bird, how do I make it so that it detects collision when the duplicated bullet(bullet+x) hits the duplicated bird(bird+x)?
View 3 RepliesI will have 5 type of buttons. Each type I will duplicate (+1) at some condition. Each button is sharing a same functions, just some difference in value and positions. Button type's name:bug1, bug5, bug10, bug20, bug50
[Code]...
I have this current simple setup:
- MOVIECLIP1, with more than 30 run-time drawing shapes that modify on enterframe.
- and MOVIECLIP2, wich should contain an exact copy of MOVIECLIP1 drawed data.
The point is that MOVIECLIP2 will be as a "reflection" or "shadow" of movieclip1. I won't need to do any interaction with it, only apply filters. Is there anyway that this can be possible - rather than having to draw the same shapes twice on both movieclips?
how can I adjust the _x and _y area positioning of this set of duplicate movieclips? 710 x 143 are the dimensions I would like the duplicateMovieClip to take place, but it is not the positioning. How can I fix this?
[AS]
duplicateMovieClip (flower, "mc"+i, i);
setProperty ("mc"+i, _x, random(710));
[code].....
I have a bunch of copies of the same MovieClip that are dynamically created I want them to be stopped when the swf first starts.When I click on one of them I want that particular one to play.I think that I've figured out how to play a single MovieClip with event.currentTarget.play(); but I am stuck on how to stop all the clips from the start.I thought I could just use a instanceName.stop(); in my for loop, but no go.[code]I'm an artist working on a piece where I am cataloging sound recordings from people (eventually recorded live from the site... but that's a battle that I'll deal with in phase 2 and after I have a bit more actionScripting under my belt).I just wanted to explain myself a bit since Kglad, Ned, and dmennenoh have helped me a bunch through the development of the project.If your interested you can check out some of my works on my website.I know,I need to update the site, but its more fun to work on new projects.
View 5 RepliesWhat Im trying to do is duplicate some main button movieClips for each <dept> node. When pressed these main buttons then show a second set of buttons for as many <menu> nodes there are. In the actionScript the displayMainButtons function is used to loop through the XML and display the Main buttons. With the other 2 display functions (displayFirstButton and displaySecondButton) Im displaying another button for each <menu> node. These too works just fine, but the problem with writing it this way is that I have to write another display function for as many <dept> nodes there are. Id like this to be written so it loops through it in one function so I can add as many <dept> nodes with as many <menu> nodes as I'd like without going back into the AS code to add more display functions. And as you can see, I had to do the same to delete the buttons.
View 1 Replieshow to communicate with those clips specifically to make them draggable and also to change the _rotation with Key.Right, Key.Left.
View 7 RepliesI found the tutorial on duplicating movieclips, especially the line-by-line translation of the code. how to communicate with those clips�specifically to make them draggable and also to change the _rotation with Key.Right, Key.Left.
View 7 RepliesI use the script below to distort a wall. When I have the MC on the stage it works but shows it twice. I solved this by hiding it with _visible but I really want to load the MC from the library. So I wrote the script like this. But nothing shows?[code]...
View 1 RepliesI have read this article about abstracting assets from actionscript:But it requires to set the Linkage Class name. How can I get the same result without setting the linkage class name?What I want to do is to cache a loaded asset, and use the cached version every time I request the same URL. A solution is to clone the loaded DisplayObject, but I think it's unnecessary since I only want a new copy.
View 1 RepliesAssume I know practically nothing about AS3! I'm using Flash Pro CS5. I'm trying to reassociate a flash file I've been given with its external assets and classes. In the library I have a movieclip with linkage to a class called 'StaticMap' using the base class 'flash.display.MovieClip'. am I missing a custom class file called 'StaticMap.as' that was originally located in the same folder as the fla, or is this a generic class accessible to all movieClips from within Flash?
View 7 RepliesMy problem is that when I click the letter movieclip it does create the duplicate as it should and it starts to drag the duplicate mc. However, when I release the clip it doesn't stop dragging? I realized that if I put onMouseUP event instead of onRelease it actually does stop dragging when I release the mouse. I would, however not like to use the onMouseUP event if possible.
[Code]...
If I have an object that calls
addEventListener(Event.ENTER_FRAME, update);
addEventListener(Event.ENTER_FRAME, update);
will that add 2 listeners?
I am having problems dupliating a movie clip. I can make a duplicate from an original but when I edit the duplicate it also modifies what is in the original. (I am just changing the text, thats the only difference between the 2) How come it effects both clips when I only change one?
View 6 RepliesI am building an image gallery which has a very simple design. The gallery has a button area, where the buttons are movieclips, and an area where there are images, which are also movieclips.I am using flash CS3, AS3.Each time I use an eventlistener to tween the alpha value of each image (the brightness) when the button movieclip is pressed, I must call a command to reduce the value of every OTHER image that is in my gallery as well as increase the alpha value of the single image I want.This means I have a lot of typing and I was wondering if there was an easier way to manage my movieclips, such as to use the Array class or the Object class. However I can not seem to on the subject on adding a movieclip instance name and its property to a class that could store the data, or the reasonable command to select/omit other movieclips
View 9 RepliesI have externalized the actionscript code of a movieclip into a separate class files.This movieclip requires references to some other clips on the stage. What I am currently doing to reference those clips is by using Movieclip(this.parent).otherclip but somehow that feels wrong.Is there a better way to pass in the required references into a class extending from Movieclip inside of the constructor? Or what is the recommended pattern here?
View 2 RepliesI have two MovieClip symbols in my library and I want them to share the same class, but Flash doesn't allow me to assign the same class to any two different MC symbols, so instead I created two bogus classes which extend the class I wished to share initially.
So having two MC symbols defined by 2 different classes extending a different class allows me to share the same piece of code.
My Question: is there a better was to share a class between 2 or more different library symbols?
how to target MovieClips from a class. If I have a MovieClip on the stage named recMc and I want to manipulate it using a class, I know that if I attach my class in the Document Class field in my .fla file and then just do something like this... it works
- class and fla are in the same folder -
Code:
package {
import flash.display.*;
import flash.events.*;
[Code]....
how to target this object without attaching the class to the Document class?
I'm having a lot of trouble understanding a certain thing.I'm creating a child of a symbol in my 'main' class.[code]I have no idea how to access 'player' from a seperate class? I would like to change x and y coords from a seperate class. However when I use code like 'player.x = player.x + 2' i get the error message Line 17 1120: Access of undefined property player.I guess in the most simple words, I do not know how to access symbols or their children from a class that is not the document class.[code]Basically I just am curious as to why I can't simply access these items from another class?
View 2 RepliesI just want different-looking movieclips to move in the same way so that I will only have to edit one file if I want to change their behavior, instead of copying the class file and renaming each one, and then I would have to edit the builder function name and class name inside each one as well, even though it would do the same thing.
View 2 RepliesHow would you go about accessing a movieclip inside another movieclip using a class file?ould you have to export every single part of a movieclip? Can it be done by just exporting the main movieclip?
View 2 Replies