ActionScript 3.0 :: Evenly Space Movieclips With Different Heights?
Feb 11, 2011
I have the following code, which works beautifully when all the boxes are the same height. The basic point is that I have three boxes on the stage, 10 pixels apart. If you click and drag those boxes above or below each other, they reorganize themselves.
// based off Dynamic Stacking AS3 @ http://blog.soulwire.co.uk/code/open-source/dynamic-stacking
var mcArray:Array = [mcA, mcB, mcC];
var mcSpacing:int = 10;
[Code]....
View 4 Replies
Similar Posts:
Aug 16, 2009
How to "space evenly" movieclips in runtime usin actionscript?
View 2 Replies
Feb 17, 2011
I'm loading in swf files into a holder swf and want to position each loaded swf underneath eachother with a 10px margin.
This is what I have so far, Its pulling in all the data correctly now just want to position the loaded swfs.
import flash.display.LoaderInfo;
var swfLoader:Loader;
var xml:XML;
[Code]....
View 1 Replies
Feb 17, 2011
I've been battling with this for a while now, I'm loading in swf files into a holder swf and want to position each loaded swf underneath eachother with a 10px margin.This is what I have so far, Its pulling in all the data correctly now just want to position the loaded swfs.
ActionScript Code:
import flash.display.LoaderInfo;
var swfLoader:Loader;
[code]......
View 4 Replies
Aug 25, 2009
I am trying to figure out how to space evenly horizontally object of different width.
View 1 Replies
Feb 13, 2010
I have two movieclips, I have managed to calculate the distance between them. The problem is I now need to figure out how to add movieclips between the distance of the two movieclips and if I add more than one movieclip they need to be evenly spaced and all should follow a straight path from the two original movieclips.
ActionScript Code:
var numOfItems:Number = 5;
var pnt1X:Number = pnt1.x;
var pnt1Y:Number = pnt1.y;
var pnt2X:Number = pnt2.x;
var pnt2Y:Number = pnt2.y;
[Code] .....
View 3 Replies
Jul 31, 2010
I noticed a bug when trying to animate movieclips in 3d space: Basically the bug occurs when trying to tween a movie-clip in 3d space across a z range that is greater than 5000 or so, which then results in very odd behavior (see end of movie above). What strikes me as especially odd, is that the whole tweening rate is messed up when this occurs, it's as if the program decides to only tween half of the distance that I give it.
I know I can workaround the problem by just scaling the object as well while it's moving, but that's besides the point. It was the very first thing I tried in CS5 and took me less than 5 minutes to find. I doubt i'm the only one. =Edit= So it seems the exact value is 5760. that's the largest distance flash will tween an object in the z direction. Also, it doesn't matter where that range is, for example I can go from 0 to 5760 or 4000 to 9760, both work just fine. This means I can work around this problem by creating two seperate tweens, but that really shouldn't be necessary, and is very bothersome considering how the new tween system works, it automatically tries to add a new keyframe to the current tween, where the limit still applies.
View 2 Replies
Aug 25, 2011
I am adding MovieClips in columns and rows according to the main container with static width and height now if user wants to enter for more rows and columns
How I should change the Moviclips size that can adjust within main container ( Blue Box as in image )
Image 1 : I am adding small white movieClips with default width and height
Image 2 : its required , small movieClips resized according to main container, when Rows and Cloumns are increased
View 3 Replies
Jan 23, 2006
im looking for a source file similar to this site. puting movieclips in 3d space
View 1 Replies
Jul 27, 2010
I have various instances of a movieclip spread across 3D space. The user is able to navigate across the 3D space using the mouse or the arrow keys - I've used a style similar to the old school first person shooter games. Some of the objects on the stage are related so I want to connect them with a line to show their relationship. As all my objects are dynamically created through AS at runtime the relationships also need to be dynamically generated. As the user navigates around the 3D space the line between the objects needs to get redrawn.
In a 2D world I'd use the drawpath or moveTo/LineTo methods to join the movieclips and have a function on the onEnterFrame command of the 3D space to keep redrawing the line.However since this is a 3D world I need to take into account the z location of the movieclips as well as the x and y locations.how I could do this or even point me in the right direction to get started?
View 3 Replies
Aug 25, 2011
I am adding MovieClips in columns and rows according to the main container with static width and heightnow if user wants to enter for more rows and columnsHow I should change the Moviclips size that can adjust within main container ( Blue Box as in image )Image 1 : I am adding small white movieClips with default width and heightImage 2 : its required , small movieClips resized according to main container, when Rows and Cloumns are increased
View 4 Replies
Sep 11, 2009
I am making a 3d scene in flash 10 and i have found that a movie clip with a vector graphic inside it becomes pixelated when the z axis is set it a negative value.
View 2 Replies
Jul 26, 2010
HI have various instances of a movieclip spread across 3D space. The user is able to navigate across the 3D space using the mouse or the arrow keys -I've used a style similar to the old school first person shooter games. Some of the objects on the stage are related so I want to connect them with a line to show their relationship. As all my objects are dynamically created through AS at runtime the relationships also need to be dynamically generated. As the user navigates around the 3D space the line between the objects needs to get redrawn.In a 2D world I'd use the drawpath or moveTo/LineTo methods to join the movieclips and have a function on the onEnterFrame command of the 3D space to keep redrawing the line.However since this is a 3D world I need to take into account the z location of the movieclips as well as the x and y locations. Does anyone know how I could do this or even point me in the right direction to get started?
View 2 Replies
Jul 20, 2010
I am needing to create random movement of multiple movieclips in a confined space. I am creating a group of fireflies that disappear and reappear at random spots.
View 19 Replies
Aug 13, 2009
I have a parent movieclip that I attach another movieclip to. The parent movieclip is 550px high and the child movieclip is 550px high. When I attach the clip a trace of both movieclips shows them as equal, but the child movieclip is much smaller. How can I make the child fill the entire parent?
View 1 Replies
Jan 12, 2009
I am about to design my first Flash website which uses pages of different heights. I want the entire window to be Flash. There will be a background pattern, and the website design will be centered horizontally, with just the height changing depending on which page I'm on. Some pages will require scrolling and other pages will not. If possible, I'd like to use the browsers built-in scroll bar. A few months ago, I would have thought this was impossible to do in Flash, but I actually have seen a website which does exactly this. It's a shame I can't remember the URL. Any suggestions on how I might go about achieving this task? The only way I can imagine is to split up all the pages on separate URL's, but then I won't be able to do smooth transitions between pages.
View 1 Replies
May 7, 2009
I am about to design my first Flash website which uses pages of different heights. I want the entire window to be Flash. There will be a background pattern, and the website design will be centered horizontally, with just the height changing depending on which page I'm on. Some pages will require scrolling and other pages will not. If possible, I'd like to use the browsers built-in scroll bar. A few months ago, I would have thought this was impossible to do in Flash, but I actually have seen a website which does exactly this. It's a shame I can't remember the URL. Any suggestions on how I might go about achieving this task? The only way I can imagine is to split up all the pages on separate URL's, but then I won't be able to do smooth transitions between pages.
View 3 Replies
Apr 7, 2007
I have a simple width and height I am pulling from an xml file, when I trace it out, it shows correctly, but when I tween the width and height it doesn't quite stop at the correct widths and heights. The width and heights from the xml are 800 and 600.
Code:
new Tween(c, "_width",btnEase, c._width,w, 1, true);
new Tween(c, "_height",btnEase, c._height,h, 1, true);
When the tweens stop, the widths and heights are off by anywhere from 5 - 10 pixels.
View 3 Replies
Apr 11, 2007
I have two main clips with clickable clicks within each. I am using swapDepths on the two main clips in a tab navagation fashion. The problem is that if I click on the space between the nested clips in the top clip it actually is hitting the buttons(movieclips) on the other clip under it. Any suggestions?
View 1 Replies
Aug 24, 2011
I tried to limit the size of the AdvancedDataGrid to its rows. Currently I am using variableRowHeight to true and at the run time setting the itemRenderer's height. Hence every row has different height. But I found that the logic behind the calculation of Grid's height is plain and simple - measure the height of the first row, then multiply it with the number of rows. Please correct me if I am wrong here I did some POC on the issue and found that during the calculateRowHeight event -> it calculates the individual row height but somewhere down the line it is only multiplying the rowCount with the first row's height. Instead it should calculate every row and should sum up the height. PS: I tried below options:
1. rowCount = arrayCollection.length
2. dataGrid.height = dataGrid.measureHeightOfItems(0, arrayCollection.length)+ dataGrid.headerHeight
View 4 Replies
Dec 28, 2009
I'm used to doing something along these lines to attach clips in columns:
Code:
var columns:Number = 4;
var space:Number =150;
[code]......
View 0 Replies
Jun 1, 2009
I want to load multiple images from an xml document into rows, one on top the other on a y axis?
here is my xml:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<cardRewards>
<rewardImage path="images/redStar1.jpg" />
[Code].....
right now i'm just trying to trace each image name and it's height through the for loop, but what i would like to do is stack each image, 1 following the other.
when i run the trace, the output repeats just the last images name and image height. There is something wrong in my loop, right? Also i should mention that each image has a different height dimension.
View 1 Replies
Oct 1, 2009
I am using he uiloader component to load 4 external swf's. But I've got a problem with spreading the uiloaders evenly on the stage when it resizes (with different browser sizes). How can I solve this to put the :
1 uiloader on 0% vertical axis
2 uiloader on 25% vertical axis
3 uiloader on 50% vertical axis
4 uiloader on 75% vertical axis
how to achieve this with AS3 code.
View 2 Replies
Dec 14, 2009
I often need to divide quantities in recipes. Normally, this is straightforward: I have an array of items to divide and a total, so I can do something like
[Code]...
However, this time I have been handed a curve ball: some of the items have a maximum amount they can be. For example, item A has a maximum amount of .25, item B is maximum of 1, the other items have no limits. So if the total amount is 3, and I am dividing it by 3 items I can't simply set each one's amount to 1 (as I normally would, as the code above does). I need to set the amount of A to .25 so there is still the .75 "left over" that I now need to apply evenly to the remaining items.
So that means the other 2 items B and C would be 1.375 each -- but, as I said above B also has a limit (of 1), so B would be 1 and C (no limits) would get the whole .75 remainder, and be 1.75. So A=.25, B= 1, C=1.75 for the total of 3. My question is, even conceptually, how would I approach a problem such as this in AS?
[Code]....
View 1 Replies
Feb 5, 2009
I have a few textField objects that are created dynamically with XML. I want to space them evenly horizontally, how would I do that? So far this is all I have, but it does not account for different character lengths per textField.
Code:
for (var i:int = 0; i < xmlList.length(); i++) {
var tf:TextField = new TextField();
[code]........
View 5 Replies
Jan 14, 2010
In need of a function to match the functionality of Flash's Align tool to "space evenly horizontally" between either two objects or to the stage.
here is a template of a function that I have been playing with:
ActionScript Code:
public function spaceEvenlyHorizontally(objects:Array,toStage:Boolean=false,obj1:DisplayObject=null,obj2:DisplayObject=null):void{
[Code].....
View 1 Replies
Jun 9, 2009
I have a round workfield and want to place 10 items evenly divided around the border. So basically I want to spread 10 items over a circle (not a line).
View 12 Replies
Apr 16, 2010
I am trying to duplicate a movie on the stage 4 times evenly spaced out
Actionscript Code:[code]..............
View 4 Replies
May 26, 2010
I am working on The ausdcf.org to try adding several banner ads in swf format to the top. The client chose not to go with Google AdManager, but prefer a "minimal approach" to do this task. What I am trying to do is sort of "mimicking" the way Google AdManager does for banners, that is, to split the chance of each particular swf to be shown to the visitor evenly among the banner collection.
Definitely I can add some jQuery code to do this from client-side, a random number generator and if-else statement would work - just $.load() it However, what if I'd like to make sure those disabled Javascript (is there any now btw?) still be able to see different swfs in each visit.
View 1 Replies
Jul 14, 2010
I have 16 columns in a DataGrid in my Flex app. The first 15 look fine, with the column, simply containing the text, but the last one has a lot of extra space. Essentially, the columns are just big enough to fit the first 15 and all that extra space is tacked onto the 16th column.
How can I evenly distribute the space over each column?
<mx:DataGrid x="127" y="9" id="view"
dataProvider = "{currentBuffer}" width="497" height="480">
<mx:columns>
[Code].....
View 2 Replies
