ActionScript 3.0 :: Resize MovieClips According To Space?
Aug 25, 2011
I am adding MovieClips in columns and rows according to the main container with static width and height now if user wants to enter for more rows and columns
How I should change the Moviclips size that can adjust within main container ( Blue Box as in image )
Image 1 : I am adding small white movieClips with default width and height
Image 2 : its required , small movieClips resized according to main container, when Rows and Cloumns are increased
View 3 Replies
Similar Posts:
Aug 25, 2011
I am adding MovieClips in columns and rows according to the main container with static width and heightnow if user wants to enter for more rows and columnsHow I should change the Moviclips size that can adjust within main container ( Blue Box as in image )Image 1 : I am adding small white movieClips with default width and heightImage 2 : its required , small movieClips resized according to main container, when Rows and Cloumns are increased
View 4 Replies
Sep 9, 2009
I've got a large bitmap (1920 x1306) that my client wants as a bg image, scaled to the swf size on load (930 x 575); but that can "grow" up to its original size if/when a user expands the browser window. All the rest of clips in the display list are to remain in place (except for a copyright clip, which they want to always be 14 pix above the bottom of the browser frame. I've tried loading the bitmap dynamically at full size and then using scaleX,scaleY to set it's initial smaller (930x575) size, and I've tried just setting the height/width of the dynamically loaded image using the math of scaleX,ScaleY just in case the scaleX "transformed" the bitmap so that it couldn't return to its original size. Both make the bitmap the right size. But the resize function below did nothing to it, (or the copyright.y.) THEN I tried just putting the bitmap into the display list (both sizing methods work here, too). But even as an original member of the compiled display list, the resize event is still not reaching the target. Everything I've seen on the web says this should work - but...no luck.
Here's the AS3 code in the 1st frame of my swf:
import flash.display.Stage;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
[Code]......
View 1 Replies
Jul 31, 2010
I noticed a bug when trying to animate movieclips in 3d space: Basically the bug occurs when trying to tween a movie-clip in 3d space across a z range that is greater than 5000 or so, which then results in very odd behavior (see end of movie above). What strikes me as especially odd, is that the whole tweening rate is messed up when this occurs, it's as if the program decides to only tween half of the distance that I give it.
I know I can workaround the problem by just scaling the object as well while it's moving, but that's besides the point. It was the very first thing I tried in CS5 and took me less than 5 minutes to find. I doubt i'm the only one. =Edit= So it seems the exact value is 5760. that's the largest distance flash will tween an object in the z direction. Also, it doesn't matter where that range is, for example I can go from 0 to 5760 or 4000 to 9760, both work just fine. This means I can work around this problem by creating two seperate tweens, but that really shouldn't be necessary, and is very bothersome considering how the new tween system works, it automatically tries to add a new keyframe to the current tween, where the limit still applies.
View 2 Replies
Jan 23, 2006
im looking for a source file similar to this site. puting movieclips in 3d space
View 1 Replies
Jul 27, 2010
I have various instances of a movieclip spread across 3D space. The user is able to navigate across the 3D space using the mouse or the arrow keys - I've used a style similar to the old school first person shooter games. Some of the objects on the stage are related so I want to connect them with a line to show their relationship. As all my objects are dynamically created through AS at runtime the relationships also need to be dynamically generated. As the user navigates around the 3D space the line between the objects needs to get redrawn.
In a 2D world I'd use the drawpath or moveTo/LineTo methods to join the movieclips and have a function on the onEnterFrame command of the 3D space to keep redrawing the line.However since this is a 3D world I need to take into account the z location of the movieclips as well as the x and y locations.how I could do this or even point me in the right direction to get started?
View 3 Replies
Feb 11, 2011
I have the following code, which works beautifully when all the boxes are the same height. The basic point is that I have three boxes on the stage, 10 pixels apart. If you click and drag those boxes above or below each other, they reorganize themselves.
// based off Dynamic Stacking AS3 @ http://blog.soulwire.co.uk/code/open-source/dynamic-stacking
var mcArray:Array = [mcA, mcB, mcC];
var mcSpacing:int = 10;
[Code]....
View 4 Replies
Aug 16, 2009
How to "space evenly" movieclips in runtime usin actionscript?
View 2 Replies
Sep 11, 2009
I am making a 3d scene in flash 10 and i have found that a movie clip with a vector graphic inside it becomes pixelated when the z axis is set it a negative value.
View 2 Replies
Jul 26, 2010
HI have various instances of a movieclip spread across 3D space. The user is able to navigate across the 3D space using the mouse or the arrow keys -I've used a style similar to the old school first person shooter games. Some of the objects on the stage are related so I want to connect them with a line to show their relationship. As all my objects are dynamically created through AS at runtime the relationships also need to be dynamically generated. As the user navigates around the 3D space the line between the objects needs to get redrawn.In a 2D world I'd use the drawpath or moveTo/LineTo methods to join the movieclips and have a function on the onEnterFrame command of the 3D space to keep redrawing the line.However since this is a 3D world I need to take into account the z location of the movieclips as well as the x and y locations. Does anyone know how I could do this or even point me in the right direction to get started?
View 2 Replies
Jul 20, 2010
I am needing to create random movement of multiple movieclips in a confined space. I am creating a group of fireflies that disappear and reappear at random spots.
View 19 Replies
Jun 22, 2004
Alright I have two Movie Clips on 2 different layers...One has the instance name panel and the other has the instance name panel2. Now, on the timeline panel is suppose to grow to 210x480 and then stop. A few frames later panel2 is supposed to resize to 150x480 but when panel2 resizes the other MC (panel) resizes to panel2's size...
Here is the code for panel:
onClipEvent(load){
// Define initial height
_root.high = 210;
// Define initial width
_root.wide = 480;
[Code] .....
View 1 Replies
Feb 18, 2009
Why the mc's are staying where I want them when you resize the stage?
View 2 Replies
Jun 30, 2007
how do I code stage resize with scaling movieclips? I can do stage resize and position/scale movieclips relative to stage size..but i don't how to have a scalable movieclip retain its scale relative to stage size. how do I code this? for example, i have a movieclip originally 50px wide, and the stage 100px wide..when i click the mc, it scales up to 80px wide. and when I resize the stage to 50px,(50% of stage size) i want the mc to scale to 40px too(50% of mc size).. and when I click it again to restore to it's original size, i want it to scale to 25px(50% of original size). then finally when i scale the stage back to 100px, the mc again is 50px wide.
View 2 Replies
Dec 11, 2010
I've got a resize listener where I change my movieclips' dimensions and positions.[code]But how I set the minimum allowed resize of the stage?I don't want the stage to be smaller than 1024x600 for example.
View 3 Replies
Apr 11, 2007
I have two main clips with clickable clicks within each. I am using swapDepths on the two main clips in a tab navagation fashion. The problem is that if I click on the space between the nested clips in the top clip it actually is hitting the buttons(movieclips) on the other clip under it. Any suggestions?
View 1 Replies
Sep 19, 2011
I am working on image and i like to scale or resize the image by dragging and resize option.same working as "free transform tool" in flash (design part); i need same functionality in application.
View 7 Replies
Jul 7, 2011
I'm having a bit of a problem here. As per the title, my flash swf file works fine when tested from the IDE, but when I publish it and open it through the browser, the stage doesn't seem to resize along with the window.I post below a bare-bones example. The "back" movie clip should resize, only it remains at the starting dimensions
Code:
import flash.events.Event;
import flash.display.MovieClip;
[code].....
View 9 Replies
Jul 29, 2009
I have Buttons which I have rotated vertically within a Canvas, that is working fine. The problem occurs, when the user resizes the window to a small size a vertical scroll bar appears, I would rather have each button squashed upto a smaller size.
<mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" width="40" maxWidth="40" xmlns:myComponents="myComponents.*"
horizontalScrollPolicy="off"
[code].....
View 2 Replies
Dec 8, 2010
I'm having a little issue with the resize event and resize effect of a VBox.
I have something like this:
<mx:VBox id="container"
backgroundColor="0xFFFFFF"
backgroundAlpha=".9"
paddingTop="15"
paddingLeft="15"
[Code]...
View 3 Replies
Jan 4, 2009
I have a main movie here that loads in an external swf through a container mc. everything is aligned and positioned to where it should be, and they are also set to that value onresize. the problem is, when my swf is loaded in, it works fine and is in the right position, same when you resize it. BUT, if you resize the window before the swf is loaded, it misaligns, until you resize!!
View 2 Replies
Sep 28, 2010
I have a datagrid that occupies 100% of browser screen. I want the grid to automatically resize when the browser is resized to small or full screen.
View 1 Replies
May 11, 2010
i am creating flex 3 component when i re size the window i need to re size the labels and text.how to do this?
View 1 Replies
Aug 6, 2010
I m trying to make sense of how to load a swf into a parent MovieClip and allow them to communicate.I ve attached two zip files � one which works fine and the other doesn�t. Unfortunately (for me), the one which doesn�t work is closer to my current project.I need to load movieclips into the parent movieclip. The parent movieclip has controls which rely on values parsed from the child movieclip.In the parent movieclips I wait until the loading is complete and so the values should be passed. However, the values aren�t passed unless I use a button (or timer), to pass the values (see the working exampes).The code which doesn�t work is:
Parent movieclip:
ActionScript Code:
stop();
var myLoader:Loader = new Loader();[code].............
View 5 Replies
Dec 19, 2009
I have two SWF-Movies. One is exported into eht other as Child.Can I instance the Objects of the two libraries in all places, where ActionScript is possible? (In Keyframes of the MovieClips and in external class definitions.)
View 3 Replies
Sep 9, 2011
Looking for a way to stop all movieclips both are the stage and that are children of the ones on the stage.
I toyed with looping thru stage's children so I can first target clips on the stage. But I am getting error.
for (var i:int = 0; i < this.numChildren; i++) if (this.getChildAt(i) is MovieClip)
{
this.getChildAt(i).stop
}}
View 5 Replies
Feb 5, 2009
I have created 25 MovieClips on the stage in 5 X 5 matrix.How can I treat 5 movieclips in each row as a group of movieclips so that I can apply same set action to them?(Similar to RadioButton functionality. )
View 6 Replies
Sep 15, 2010
Printing an MC is easy enough. But I am having trouble printing an MC which has multiple MCs inside of it. They just don't get printed.
I am trying to avoid printAsBitmap.
View 5 Replies
Oct 21, 2010
I want to test mc animations without having to hit F12 to see if they work correctly. For instance, if I have an animation movieclip and then I make another movieclip and drop that aforementioned movieclip within, and animate [via the timeline or library preview] I'm unable to see on-the-fly what my animation looks like... it only shows the top most nest, unless I F12 it.
So if I have a character blinking eyes (one movieclip) and then I create another movie clip of the face, and put that aforementioned movieclip within, the preview animation within the library does not show how it'll be viewed when F12'n it.,,,, it'd be great to see your animations on the fly.
View 1 Replies
Oct 30, 2007
why does a MC inside another MC have different _x and _y values than the main timeline?What I am trying to do right now is animate a MC inside another MC then get the main MC holding everything to move where that new MC ended animating at (it's part of a game I'm making.)
I know it's confusing but Flash shows the cursors current X and Y in the info panel, which is the same as the main timeline. Yet inside the movieclip, an x of 76 and a y of 277 on the timeline is -195 and -30.9 (respectively) inside the MC.How do I fix it so I can get the _x and _y values to match up so I can tell the main MC to reposition itself to the new X and Y (of the inside MC)
View 1 Replies
