Printing an MC is easy enough. But I am having trouble printing an MC which has multiple MCs inside of it. They just don't get printed.
I am trying to avoid printAsBitmap.
why does a MC inside another MC have different _x and _y values than the main timeline?What I am trying to do right now is animate a MC inside another MC then get the main MC holding everything to move where that new MC ended animating at (it's part of a game I'm making.)
I know it's confusing but Flash shows the cursors current X and Y in the info panel, which is the same as the main timeline. Yet inside the movieclip, an x of 76 and a y of 277 on the timeline is -195 and -30.9 (respectively) inside the MC.How do I fix it so I can get the _x and _y values to match up so I can tell the main MC to reposition itself to the new X and Y (of the inside MC)
I have a movieclip called mapWindow, inside mapWindow are dynamically created movieclips of various sizes. The movieclips inside the mapWindow don't take up the entire space of the mapWindow and thus I use a startDrag on the mapWindow upon detection of a mouse press. The problem is, I don't want the start drag to start if the mouse is detected over any of the child movieclips inside mapWindow.
I have a few ideas of how to proceed, but I'm not sure how to reference all child movieclips of a particular movieclip - or something along those lines.
It would be easy to use the hittest function if I knew how to reference all the movieclips I need to, but alas...
I am building a map which has different layers on it, all on top of one another, all 700x700px and all movieclips. I have a print button (PrintUp) which sends the movieclips to be printed, however when I print, they don't sit on top of one another, they come out separately. How can I get them to print on top of each other like they are in the swf?
The two movieclips are "Background" and "Grass"
Both 700x700 and exactly the same X&Y.
Here is the code below:
PrintUp.addEventListener(MouseEvent.CLICK,Print);
function Print(e:MouseEvent):void{
var printJob:PrintJob = new PrintJob();
if (printJob.start()) {
if (Background.width>printJob.pageWidth) {
[Code] .....
I am trying to print a movieclip that has a colorMatrixFilter applied to it, but when I print, it comes out without the filter applied.
View 3 RepliesI have a XML file with the following content:
Code:
<?xml version="1.0"?>
<schedule>
<class>
<name>AAA</name>
<time>9h30</time>
[Code] .....
Happens that it actually assumes the correct number of XML elements (2 classes), however, I can only print data on the first container (only the time and name from the first class).
So I've recently started working with ActionScript 2.0 at my internship. I am now working on a game, that already had all its graphic interface designed and I am doing all the programming. Basically what I have to do is get some movie clips (randomly) from a different scene and print them on another scene in a designated area (but also randomly). I am not sure the best way to explain my problem, so I made a sketch of how the scene should look. [URL] So basically I want to print the movie clips on the black space, as if they were the red squares. But the movie clips are stored in a different scene in the same project. So I want to know two things: how do I get the movie clips from the different scene? And how do I print those movie clips on the specific area?
View 1 RepliesI have done this same thing in ActionScript 3, but am not familiar with ActionScript 2, which I am forced to use for this project. I am loading products into a SWF via XML and attempting to add a click event to each dynamically-created movieclip. Simply tracing the text from a node in XML will do for now. I'd like to assign a property called "desc" or "description" to each movieclip and have it trace that property's value when clicked. Here is the relevant portion of my code as it stands:
ActionScript Code:
var iXML:XML = new XML();
iXML.ignoreWhite = true;
[Code].....
I m trying to make sense of how to load a swf into a parent MovieClip and allow them to communicate.I ve attached two zip files � one which works fine and the other doesn�t. Unfortunately (for me), the one which doesn�t work is closer to my current project.I need to load movieclips into the parent movieclip. The parent movieclip has controls which rely on values parsed from the child movieclip.In the parent movieclips I wait until the loading is complete and so the values should be passed. However, the values aren�t passed unless I use a button (or timer), to pass the values (see the working exampes).The code which doesn�t work is:
Parent movieclip:
ActionScript Code:
stop();
var myLoader:Loader = new Loader();[code].............
With CS3, when I entered a movieclip, I could see the other movieclips/stage in the background. But now when I enter a movieclip with CS4, I get the stage color as the background. If I try to test that "scene", the objects are in the top left corner.
It makes positioning from within a movieclip very very difficult.
I have two SWF-Movies. One is exported into eht other as Child.Can I instance the Objects of the two libraries in all places, where ActionScript is possible? (In Keyframes of the MovieClips and in external class definitions.)
View 3 RepliesI created a movie clip (let's call it "mysymbol") that contains several buttons, as well as functions for MOUSE_OVER and MOUSE_OUT events ("mover" and "mout"). Everything works when the mouse enters "mysymbol" for the first time (mover is being called), but if I move the mouse inside mysymbol to another button, the MOUSE_OUT function (mout) is being called first and then immediately mover. Obviously, I don't want there to be any function calling at all! I have found a way to circumvent this, but since I'm new at this I struggle to get it to work properly:
If mysymbol is a button instead of a movie clip, then I can move my mouse freely within mysymbol without triggering any MOUSE_OVER or MOUSE_OUT events. However, there is another problem: I somehow can't get movie clips to work inside a button(I assume this is by design), so how do I get my animations etc. to work inside this button? is there an alternative to using a button as a container?
I am trying to teach myself Flash with AS3, I am using Flash Pro CS5. I am making a website and I want to be able to press a button thats inside a movieclip to navigate to a given frame. Example, Two frames, frame 1 has a movieclip with a button inside a scrollpane. I want to click the button and go to frame 2. need a complete and detailed script for this if thats ok. Also, I dont know if this helps any but the code that I use for buttons on the main timeline is this:
ActionScript Code:
function button_clicked(e:MouseEvent):void{
gotoAndStop("frame2");
}
button.addEventListener(MouseEvent.CLICK, button_clicked);
Looking for a way to stop all movieclips both are the stage and that are children of the ones on the stage.
I toyed with looping thru stage's children so I can first target clips on the stage. But I am getting error.
for (var i:int = 0; i < this.numChildren; i++) if (this.getChildAt(i) is MovieClip)
{
this.getChildAt(i).stop
}}
I recently started learning Flash and Actionscript and now I'm trying to write an actionscript for the first time. Im doing this in Actionscript 2.0.I have a movieclip that consists of two images and one dynamic text field with a variable. The name of the images are "VS1_P1_RUN" and "VS1_P1_OFF" and the name of the dynamic text field is "pumptext". In the dynamic text field I have the variable "VS1_P1_Ind". VS1_P1_Ind is probably a boolean variable as it shows 1 or 0 in another program but in Flash it shows True or False (not sure if Flash thinks it's a text/word or a boolean).My script is supposed to display the image named VS1_P1_RUN if the variable of the dynamic text field pumptext shows the text True and it goes like this:[code]
So I'm completely stuck in what to do. The bottom code works as it should but I want the images to show depending on the value of the variable VS1_P1_Ind. I thought just changing the text field to dynamic and typing the variable name in the variable field would do it but no.If it could be a clue to the solution I'll also share that the value of the variable is not seen/shown in textfield while inside the movieclip. Creating a dynamic textfield outside of the movieclip shows the value of the variable just fine, True/False.
I am trying to make hitsplats that are activated when I hit an "Attack" button on my main layer. I have placed a Dynamic text box with the variable Hitsplat and I made an animation with stop(); on the first frame, having it off of the stage. what can I do to activate the hitsplat, and change the number in it, to the damage being dealt by the button? [code]hitsplatmc would be the movie clip containing the dynamic text I wish to become the dmg and move upward. I am assuming the problem lies with the fact that _root.hitsplat lies in another MC.
View 1 RepliesI'm making an animation with movie clips inside the stage but if i put action in the end of these for go to another frame in the stage, dosnt let me because AS3.0 doesn't allow script inside buttons and MC's. The new code from AS3.0 is so different to AS2.
View 3 RepliesThis is a program I wrote to attach a movie clip to a target:[code]How do I target the "child" of a movieclip in order to attach a file to it?
View 7 RepliesI have a movieclip that has several buttons inside it. When I use this code:
mc.onRollOver = function()
{
// do stuff
[code].....
I have created app where images are loaded from xml and displayed onscreen as elements, which can be dragged onto a different 'holder' MovieClip. On successful drop the 'holder' movie generates dynamic movieclip as 'mc' and adds a larger version of the droped image. so i can have multiple child of 'holder' everytime a element is dropped.
now i have created a button, on click of which all the elements should be removed. for which I am using the following code
while (mainFrame_mc.imgArea.holder.numChildren > 0){ mainFrame_mc.imgArea.holder.removeChildAt(0); }
this code is removing the child clips as required but later when i again drop another element. nothing shows up. Unable to understand why is this happening. The holder movie clip is physically present on the stage where as only its child movie clips are added dynamically.
I am having trouble where this error is showing up: TypeError: Error #1009: Cannot access a property or method of a null object reference. at EssayMain() I have some trace statements in place
[Code]....
I am trying to reference a movieclip located inside an array to add an eventlistener and function... I am using array[0].add...ect. The code for the first movie clip works, but for the rest I get an error 1010.
Code: Select allvar image:MovieClip = new Image();
addChild(image);
const MAX_ITEMS:uint = 6;
[code].....
I am sure I must be doing something very stupid but here goes:This is for a navigation bar.
- I have a main movie (mcMenu) on my stage which holds all the main buttons (btnHome, btnAbout, etc..).
- Inside mcMenu, when I roll over say btnAbout, the movie plays from 10 to 20th frames during which time a submenu fades into view.
- Inside this submenu, I have the sub-section buttons. It is these buttons that I am having problems with. Basically, I can't get them to respond to onRelease events.
I'm currently learning OOP through Sen's information here at Kirupa, and I've decided to try out his "creatures" exercise mentioned in his Best of Senocular thread...The situation is a random number of sprites are created, and they move around the stage, interacting. They all have a certain amount of "health," defined as a variable in a MovieClip prototype applied to the MC. When they hit, I want their health to go down a little bit, so how can I access a particular MC's "health" variable while I'm outside of the MC itself?
View 1 Repliesi have an external swf file and i load it to a movieclip name holder mc how do i preload it?
View 4 RepliesHow can i reference variables inside of movieclips
i've tried.. mcname.variablename but it doesnt work...
also how do access a variable in the main timeline from within a movieclip.. i used to do it through _root.variable but that doesnt work anymore..
and lasty... how do i access a variable inside a class from within a movieclip?
I am trying to create an image gallery using an Array with MovieClips inside it but I keep getting this error:
TypeError: Error #1034: Type Coercion failed: cannot convert Fullsize_01$ to flash.display.DisplayObject.
Here is the code I made. I know it's probably something simple but I am pretty new to ActionScript.
var Fullsize_Pic:Array = new Array();
Fullsize_Pic[0] = Fullsize_01;
Fullsize_Pic[1] = Fullsize_02;
addChild(Fullsize_Pic[0]);
I am sure I must be doing something very stupid but here goes: This is for a navigation bar.
- I have a main movie (mcMenu) on my stage which holds all the main buttons (btnHome, btnAbout, etc..).
- Inside mcMenu, when I roll over say btnAbout, the movie plays from 10 to 20th frames during which time a submenu fades into view.
- Inside this submenu, I have the sub-section buttons. It is these buttons that I am having problems with.
Basically, I can't get them to respond to onRelease events.
I'm currently learning OOP through Sen's information here at Kirupa, and I've decided to try out his "creatures" exercise mentioned in his Best of Senocular thread...I still have a bunch to learn, but I wanted to go ahead and ask a question for a problem I am having right now.The situation is a random number of sprites are created, and they move around the stage,interacting. They all have a certain amount of "health," defined as a variable in a MovieClip prototype applied to the MC. When they hit, I want their health to go down a little bit, so how can I access a particular MC's "health" variable while I'm outside of the MC itself?
View 1 RepliesI have created 25 MovieClips on the stage in 5 X 5 matrix.How can I treat 5 movieclips in each row as a group of movieclips so that I can apply same set action to them?(Similar to RadioButton functionality. )
View 6 Replies