I have a replay button on the last scene of my .fla and I want - when clicked - to
replay the .fla from frame 1, Scene 1.
I've used the following code:
stop();
ReplayBtn.addEventListener(MouseEvent.CLICK,onClic k);
function onClick(event:MouseEvent):void {
gotoAndPlay(1, "Scene 1")
}
on the last frame of "as" layer, but nothing happens.
What is the code to replay a movie using replay button on stage? Using actionscript 3.
View 1 RepliesI'm having issues with switching scenes for this 6 scene short story, between scene 1 and 2, the text (thats in a text box from my character) in my project, slides in and out just fine... At the end of the code in the 1st frame, I added a code snippet (click to go to next frame and stop), and it goes to the next frame, code then tells to click button, then the text switches/slides in and out fine, the horse(another character) comes into the scene fine... Then again at the bottom of frame 2 now, I add the same code snippet to the click button, its suppose to go to scene/frame 3, where the text slides in and then out, but it's giving me output errors, AND I noticed when I press the (click to go to next frame and stop)snippet again, it inputs a totally different snippet(click and play next frame), which I manually change back to the other snippet, and even make sure that its suppose to go to frame 3, and then it still gives me output errors: Error:
Cannot tween a null object. at com.greensock::TweenLite() at com.greensock::TweenLite$/to() at CortesWP1_fla::MainTimeline/fredRun2() at Function/http://adobe.com/AS3/2006/builtin::apply() at com.greensock.core::TweenCore/complete() at com.greensock::TweenLite/renderTime()
[Code].....
For some reason the code in scene 1(frame 1) to scene 2(frame 2) is fine. Its the code from scene 2(frame 2) to scene 3(frame 3) thats giving me issues. I'm trying to keep the button I created on the bottom right corner of the scene, to be the one button that clicks from scene 1 through 6(dones not need a previous button).
whenever I set my sound to stream and continue to make a movie with multiple scenes. The audio and video get disgustingly out of sync sometimes even off by 30 seconds. I just started an animation its only 10 seconds long with two scenes and the AV is already off by about 5 seconds. Ive worked around this by avoiding scenes altogether but i really don't want to have another 5000 frame scene. I discovered this problem in Flash MX and Im quite annoyed that it still has't been fixed 3 years later!
View 1 RepliesOk so here is my XML slideshow Actionscript:
ActionScript Code:
stop();
var xmlRequest:URLRequest= new URLRequest("graphicImages.xml");
var xmlLoader:URLLoader = new URLLoader(xmlRequest);
[Code]....
So I figured that the coding of separate scenes would work independently of one another, but I guess I was dead wrong, because when I apply this to a different scene and change the XML path for a different set of images, I get all sorts of conflict errors when I test the entire movie. I have my flash film set up so that each link send the user to a different scene, which plays a unique intro for each, and then the slideshow appears on screen and the viewer can navigate the images.
Is there a work around for this? Or am I going to have to break my flash movie into separate movies? Or should I just add a suffix to all my vars and functions so that they are unique for each scene?
I've created a simple animation (falling snowflakes with some text that pops in and out) and I wanted to create a button that would replay it at the user's command. I've searched everywhere for the code or how to do this, but I've found nothing of relevance.
View 7 RepliesI have inserted my replay button into my flash movie and it works.
The problem is when I replay my movie some aspects of my animation do not work in the replay.
I believe this is because I have other timelines for movement e.g birds wings.
How do i implement code so that the entire movie will replay?
This is my code for link sound from libraryvar snd:Sound = new mySound();snd.play (0 , 0);And I made a replay button at the end of flash, with this code
stop();
replay.addEventListener(MouseEvent.CLICK,onClick);
function onClick(event:MouseEvent):void {
[code].....
I have a .FLV video that I have loaded via FLV playback container (AS3). At the end of the video. I then have a replay button, that when clicked would like to either fade or dissapear and play the video again.
View 2 RepliesI am new to using flash and am working on small flash movie for a class assignment. I had to add a replay button at the end of my movie which I did according to my text and other tutorials I have read unfortunately my replay button is not working. Just realized I cannot upload my file as it is too large, can email them my file.
View 3 RepliesI made a flash movie and all i need to do is make a replay button, but i have no idea how. i am using cs5. my movies goes through multiple scenes so at the last scene i want them to click on the reply button to go to the 1st scene again. however, i have no idea where my actions layer and labels layer go or what action to put into my button. i looked around, but every video i find, they seem to only be working in one scene and within one layer too.
View 1 RepliesI've made a replay button for my flash animation in CS4. This is the script I'm entering
Quote:
replay_btn.addEventListener(MouseEvent.MOUSE_DOWN, replayPressed);
function replayPressed(e:MouseEvent):void {
gotoAndPlay(1);
}
[Code].....
I'm making a preloader and i want to make it so when the animation ends and goes back to frame one, the play button will be replaced by a replay button. i know i could just put it at the very end of the animation but i want to make this preloader into a template for everything else i do so i want to be able to just make an animation and not have to worry about manually putting the replay button in.[code]...
View 2 RepliesI have an FLVPlayer which plays a video and after the video is done playing, the REPLAY button shows up. Upon clicking the REPLAY button the movie starts over.. Everything works well, except, the REPLAY button only works once.. meaning, once the movie played once and REPLAY button is cilcked to play it again, after the movie is done playing for the 2nd time - the button doesn't appear..
import fl.video.*;
import flash.display.MovieClip;
var myVideo:FLVPlayback = new FLVPlayback();
[Code]....
I have a .fla project being created under CS4, using ActionScript 3.0, that consists of multiple scenes.
In the code attached to the first scene, I define some functions that are used as methods on buttons[code]...
Is there a way to do this? I am just now hearing of (and experiencing) all the downfalls of using scenes to create an interactive website. I may have to start the whole thing over at the mid point if there isn't a way to convert it into one It will save a week's worth of work!
View 1 RepliesWell, I know how to use the ifFrameIsLoaded to load one scene, but I was wondering if anyone could tell me the script needed to use the action to load multiple scenes rather than one.
View 1 RepliesI have a swf that is built with 3 scenes. The 1st scene is actually the prealoader for the movie.Now, in the last scene i load an external picture (picture.loadMovie(...)). I want to load the picture in the first scene,as i need it allready loaded when displaying it in scene 3. to avoid the loading delay.
View 6 Replies1. Created a flash banner ad on the first scene. Take note they're all under frame one because I used movie clips for the animations (Movie clip ends on the 100th frame and not sure if I need to add a stop(); code there or place the gotoAndStop command). Anyways, moving on.
2. I created a new banner onto another scene which by now I have 2 scenes. Just like scene 1, all the animations and such are all under frame 1.
3. Placed an action script on the first scene to play the next scene.
gotoAndStop("scene 2", 1);
4. For the second I placed the action script:
gotoAndStop("scene 1", 1);
Output:It looks like my banner ad is flipping one scene from another without stopping. I know my action script is not correct. I know you folks are far more experience in flash, so I implore your wisdom.
I've created a repaly button to replay an imported swf file (instance name=dpCuspSub_mc) located in frame 1 of a movie clip. It works, but then it starts looping and I want it to replay only once.
replay_btn.addEventListener(MouseEvent.CLICK,replay); function replay(evt:MouseEvent):void {dpCuspSub_mc.gotoAndPlay(1);}
I'm a graphic artist who has just started learning Flash, so please simplify as much as possible.
I'm trying to figure out how to get my replay button to appear at the end of my external flv video. From what I've researched so far the best way to do it would be with netstream or cue points (both of which I don't know). I am not the best actionscripter
View 4 RepliesI have done this in AS2 but am having some trouble with my code for AS3. I would like to add a replay button to my video player when the video has ended. Some of my code looks like this:[code]The part I'm having trouble is from "ns.addEventListener." down. I think this is right, although I don't know what to put in my "if" statement.
View 2 RepliesI have an AS2 project with two scenes, Scene 1 is has a pre-loader and Scene 2 has an embedded .flv animation from after effects with some other basic tweened shape layers and masks. I've used the Components UI and dragged a "Replay" button to the last keyframe with a separate actions layer with the following code:
stop();
Replay.addEventListener(MouseEvent.CLICK, replayMovie);function replayMovie(evt){gotoAndPlay("Scene 2",1);}
I'm a beginner in Flash and have been following instructions off the net but I can't get it to Replay the movie when the button is clicked, it does nothing.
I'm working on a flash video.. I have no problem converting/linking the video, etc - however, need to have a replay button as well as another button (to go to another page and such) after the video is done playing. I'm assuming that I need to check for when the video is done playing and than make the buttons visible?
View 3 RepliesI have an FLVPlayer which plays a video and after the video is done playing, the REPLAY button shows up. Upon clicking the REPLAY button the movie starts over.. Everything works well, except, the REPLAY button only works once.. meaning, once the movie played once and REPLAY button is cilcked to play it again, after the movie is done playing for the 2nd time - the button doesn't appear... here's the code:
import fl.video.*;import flash.display.MovieClip;var myVideo:FLVPlayback = new FLVPlayback();var mybtn:myBtn = new myBtn();var staticpic:staticPic = new staticPic();var logo:Logo = new Logo();myVideo.source = "BatterypoweredFCM.f4v";myVideo.skin =
[code]........
I'm working on a flash video.. I have no problem converting/linking the video, etc - however, need to have a replay button as well as another button (to go to another page and such) after the video is done playing... diret me to a tutorial about this? I'm assuming that I need to check for when the video is done playing and than make the buttons visible?
View 1 Replieshow to place movieclips onto the stage using actionscript 3.0 without having any material in my timeline. In other words just having my actions layer, and placing all my movieclips I created from my library to the stage using code.
how do I import a replay button onto the stage using actionscript. Right now I'm creating a web banner for school using as3, but I would like to learn if there is a code that would "replay" all actions I've written in my actions, or how to make my banner replay once is done animating.
1. "skip intro" is supposed to make the movie skip to frame 505 (this is not a skip to the homepage button)
2. "replay intro" is supposed to replay the intro from frame 1
I thought this should be easy enough even for someone like me without any action scripting experience whatsoever but, alas, I got stuck (after spending some 5 hours scouring tutorials and websites).
is it better to use different scenes for multiple types of media rather than using a container to load and unload? scene 1 mp3 player scene 2 video player scene3 swif loader etc
View 3 RepliesI just started using CS4. I have one problem with audio played from timeline in multiple scenes. The first 2 sceense work fine but the 3rd one has problem. The audio would pick up the last brief second of the audio before the current one and then plays the current audio. The pick up includes the last second of the last audio of the previous scene or the clip from the current scene.
If I copy all the frames in the problem scene into a new file, audio plays perfectly.
Have anyone seen something like this and what is the cure?