Make A Movie With Multiple Scenes - Streaming Sound And Scenes Sync
Jul 3, 2009
whenever I set my sound to stream and continue to make a movie with multiple scenes. The audio and video get disgustingly out of sync sometimes even off by 30 seconds. I just started an animation its only 10 seconds long with two scenes and the AV is already off by about 5 seconds. Ive worked around this by avoiding scenes altogether but i really don't want to have another 5000 frame scene. I discovered this problem in Flash MX and Im quite annoyed that it still has't been fixed 3 years later!
View 1 Replies
Similar Posts:
Apr 29, 2002
I currently have a movie, about 12 scenes long. I have a sound control that loops the track I have the user select repeatedly. But because I wanted music to always play unless they manually turned down the volume in my controls I load the music each time the main scene is loaded... This ends all of the other sounds and just restarts the first track in my list.
Here's the code:
For the main frame, inside a movie clip placed on scene 1:
stop ();
stopAllSounds ();
setProperty ("playing1", _visible, "1");
setProperty ("playing2", _visible, "0");
[Code]....
All I want this to do is keep playing the track the user selected, and not have to reset everytime the main scene is loaded...
View 1 Replies
Jan 18, 2010
Most of my flash movies have been reasonable sizes, but the one I'm working on now is kind of a beast. It's up against the 16000 frame limit, so I'm looking into ways to chop it up. The problem is that I need a way to keep my background music playing across multiple scenes or movies. Is there a way to start a sound file in one movie, and have it continue when another scene is loaded or when a second movie file is loaded with ActionScript?
View 3 Replies
Nov 2, 2009
I've created an articulated drawing with the bone tool and converted it into a symbol. However, when I drag the symbol into my scene and manipulate it, it changes the original symbol instead of using it as a instance that can be animated independently>
View 6 Replies
Sep 2, 2009
However, I have a main movie and in there I open the multiple scenes. If I use the preloader alone with the scenes it works, but when I want to load the preloader that should open the scenes inside the main movie it doesn't do anything.
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loop);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, done);
l.load(new URLRequest("magazine.swf"));
function loop(e:ProgressEvent):void{
[Code] .....
In the old situation I use a button goto frame - and on the frame there is actionscript that says:
stop();
loadMovie("magazine.swf", 'placeholder');
have changed that to
stop();
loadMovie("preloader.swf", 'placeholder');
View 5 Replies
Nov 4, 2009
I have multiple scenes. In each scene I load lot of movie clips.I move from one scene to another scene and may come back to the already visited scene.
1. From one scene if I move to some other scene will it flush or unload the scene with the movie clips or they will be still floating in the memory? If it is going to be in the memory with the loaded movies how can I unload them when I move from Scene to Scene?
2. Can I reuse a loaded movie in one scene, in another scene? Basically can I share the same loaded movie in multiple scenes?
View 9 Replies
Apr 3, 2007
how to make preloaders to load scenes or just movie clips.
View 3 Replies
Jun 2, 2010
I am working with a project that has many scenes. Each scene has a movie clip attached to it. The first scene is simple...just a couple of buttons and that is it. My worry is that when I add all of the videos that correspond with each button and publish the SWF will be a huge file. THE QUESTION: Does flash load ALL scenes of a movie or does it load the first scene and then load the other scenes when the user needs to view them?
My ultimate goal is to just have the first scene load and then when the user clicks on the buttons contained within that scene that only upon release does the corresponding scene load. Maybe I am doing this completely wrong and should look at doing it another way.
View 6 Replies
Nov 10, 2009
I have created a X-mas card for my company. When the card opens, the 3 circles are buttons to different scenes within Flash. The text in the bottom left is a button to the final scene.
The card can be viewed here: [URL]
1) When I click on the circle button that has the red garland and tree ornaments in it, if you listen close at the very beginning of the scene, a squeek sound plays. I use this squek sound in the hamster wheel movie symbol used in other scenes, but not in this scene. I don't even have the sound in this scene of the Flash project anywhere. I can not figure out where it is coming from.
2) Does anyone have some optimization tips? My project file is huge and a lot of the people we will be sending this out to probably don't have the most up-to-date processers. Should I split each scene into it's own Flash movie that is only loaded when the button for that scene is selected instead of the whole thing loading?
Here is a link to view the .FLA file: [URL]
View 1 Replies
Nov 14, 2007
I'm doing a project that I have to use scenes in, I have a sound object that i want to be able to control in all scenes. I set up global variables for the sound object and a boolean to check if the sounds currently playing like this :
PHP Code:
_global.sound1= new Sound();
_global.sound1.attachSound("song");
_global.soundplaying = 0;
In each scene I have two buttons a stop and a play button, Heres my code for play:
PHP Code:
if(!_global.soundplaying){
_global.sound1.start();
_global.soundplaying = 1;
}
And stop:
PHP Code:
_global.stewielaugh.stop();
_global.soundplaying = 0;
Doesn't seem to work, if I press play in scene one and go to scene 2 and then return to scene one the sound can be played again on top of the already playing sound object.
View 2 Replies
Oct 2, 2007
I've set a music sound to play across three scenes in my movie. However, when the user clicks to enter the fourth scene, I'd like the music to stop. Simple enough.
Here's the problem...the fourth scene contains individual keyframes in the scene where I have separate voice overs for each frame. The user navs forward or backward among the scene's keyframes using arrow buttons for forward and backward. How can I have the voice over stop playing on frame 1 if the user clicks the arrow to go to frame 2 if the frame 1 sound isn't finished playing? Frame 1 plays out until finished, even if the user has clicked to go to frame 2.
Then, on return to the main scene where the general music file played, I'd like it to resume playing upon the user clicking 'return home.'
Incidentally, I set up my sound files to play on a soundtrack timeline.
View 4 Replies
Sep 8, 2009
Ok so here is my XML slideshow Actionscript:
ActionScript Code:
stop();
var xmlRequest:URLRequest= new URLRequest("graphicImages.xml");
var xmlLoader:URLLoader = new URLLoader(xmlRequest);
[Code]....
So I figured that the coding of separate scenes would work independently of one another, but I guess I was dead wrong, because when I apply this to a different scene and change the XML path for a different set of images, I get all sorts of conflict errors when I test the entire movie. I have my flash film set up so that each link send the user to a different scene, which plays a unique intro for each, and then the slideshow appears on screen and the viewer can navigate the images.
Is there a work around for this? Or am I going to have to break my flash movie into separate movies? Or should I just add a suffix to all my vars and functions so that they are unique for each scene?
View 1 Replies
Aug 26, 2010
I have only two days to get this working and handed in. My class did not teach actionscript, the code for keeping sounds playing through multiple scenes was provided for us :
var mySound:Sound = new soundtrack();
mySound.play();
Unfortunately this doesn't seem to work in actionscript 3..... and my entire movie is actionscript three. It won't let me save down or convert it or anything.... and I can't get my stuff into another file without screwing it all up.
View 4 Replies
Jan 9, 2012
I simply don't understand why now at the end of my project, the last 5 frames are giving me such trouble. I have five scenes. The first scene plays fine. Second scene plays fine until just the end, then it grabs audio from the third, fourth and fifth scenes and starts playing them. Here is the site: [URL] (it is a site for children in Swedish) if you click the 3rd button to the right (3 Delan) you will notice that the sound starts truncating and then starts grabbing and placing into scenes before the next scene.
View 1 Replies
Jan 19, 2010
Situation: I have a project I'm working on where I have buttons which make click sounds on their own, and also take you to other scenes where a sound will immediately play. There are also three movieclips involved, total my base movieclip and two independent ones that load on top of that. Problem: I want to include a Mute button so that you can turn off all sounds, but can't figure out how to do that..As I understand it, stopAllSounds won't work for me, because as soon as someone hits another button, a new sound will play.
View 5 Replies
Feb 27, 2009
I have a .fla project being created under CS4, using ActionScript 3.0, that consists of multiple scenes.
In the code attached to the first scene, I define some functions that are used as methods on buttons[code]...
View 1 Replies
Nov 18, 2009
Is there a way to do this? I am just now hearing of (and experiencing) all the downfalls of using scenes to create an interactive website. I may have to start the whole thing over at the mid point if there isn't a way to convert it into one It will save a week's worth of work!
View 1 Replies
Dec 15, 2002
Well, I know how to use the ifFrameIsLoaded to load one scene, but I was wondering if anyone could tell me the script needed to use the action to load multiple scenes rather than one.
View 1 Replies
Oct 2, 2006
I have a swf that is built with 3 scenes. The 1st scene is actually the prealoader for the movie.Now, in the last scene i load an external picture (picture.loadMovie(...)). I want to load the picture in the first scene,as i need it allready loaded when displaying it in scene 3. to avoid the loading delay.
View 6 Replies
Mar 9, 2010
1. Created a flash banner ad on the first scene. Take note they're all under frame one because I used movie clips for the animations (Movie clip ends on the 100th frame and not sure if I need to add a stop(); code there or place the gotoAndStop command). Anyways, moving on.
2. I created a new banner onto another scene which by now I have 2 scenes. Just like scene 1, all the animations and such are all under frame 1.
3. Placed an action script on the first scene to play the next scene.
gotoAndStop("scene 2", 1);
4. For the second I placed the action script:
gotoAndStop("scene 1", 1);
Output:It looks like my banner ad is flipping one scene from another without stopping. I know my action script is not correct. I know you folks are far more experience in flash, so I implore your wisdom.
View 2 Replies
Oct 27, 2010
I am trying to build a very simple Flash app in CS4. All I want to do is have JPGs overlayed over a sound layer in a series of scenes. I want a basic intro scene that ends w/ a table of contents from where you can click to view any scene. At the end of each scene is a frame where the user can replay the current scene, return to the TOC frame in scene 1 or proced to the next scene. I am having two SERIOUS problems.
1. For some reason my movie is NOT stopping at the "stop ();" action at the end of scene one. the action is on its own keyframe in the timeline, but when I "test movie" it just plays right past that to scene 2.
2. I obviously need multiple buttons on a scene to do different things on click. Does it really have to be as complicated as it seems to have multiple buttons all do different things on click? I keep getting told I have duplicate actions when I have two buttons on a page that do different things on click. I have named each button instance a unique name and written the gotoandplay click event using those unique instance names.
View 1 Replies
Jan 23, 2009
is it better to use different scenes for multiple types of media rather than using a container to load and unload? scene 1 mp3 player scene 2 video player scene3 swif loader etc
View 3 Replies
Sep 14, 2009
I just started using CS4. I have one problem with audio played from timeline in multiple scenes. The first 2 sceense work fine but the 3rd one has problem. The audio would pick up the last brief second of the audio before the current one and then plays the current audio. The pick up includes the last second of the last audio of the previous scene or the clip from the current scene.
If I copy all the frames in the problem scene into a new file, audio plays perfectly.
Have anyone seen something like this and what is the cure?
View 4 Replies
Dec 21, 2010
I try to run a swf or html file of my fla file and it only works on my machine but not on my laptop. I have the latest flash player installed but it still doesn't work. My laptop works for single scenes swf and html but not for multiple scene file.
View 5 Replies
May 30, 2011
I'm having issues with switching scenes for this 6 scene short story, between scene 1 and 2, the text (thats in a text box from my character) in my project, slides in and out just fine... At the end of the code in the 1st frame, I added a code snippet (click to go to next frame and stop), and it goes to the next frame, code then tells to click button, then the text switches/slides in and out fine, the horse(another character) comes into the scene fine... Then again at the bottom of frame 2 now, I add the same code snippet to the click button, its suppose to go to scene/frame 3, where the text slides in and then out, but it's giving me output errors, AND I noticed when I press the (click to go to next frame and stop)snippet again, it inputs a totally different snippet(click and play next frame), which I manually change back to the other snippet, and even make sure that its suppose to go to frame 3, and then it still gives me output errors: Error:
Cannot tween a null object. at com.greensock::TweenLite() at com.greensock::TweenLite$/to() at CortesWP1_fla::MainTimeline/fredRun2() at Function/http://adobe.com/AS3/2006/builtin::apply() at com.greensock.core::TweenCore/complete() at com.greensock::TweenLite/renderTime()
[Code].....
For some reason the code in scene 1(frame 1) to scene 2(frame 2) is fine. Its the code from scene 2(frame 2) to scene 3(frame 3) thats giving me issues. I'm trying to keep the button I created on the bottom right corner of the scene, to be the one button that clicks from scene 1 through 6(dones not need a previous button).
View 3 Replies
Jul 13, 2011
I have a project that requires building the project using Scenes to chunk up different sections of an Elearning course.
I have created 20 Scenes.
Each Scene uses the same interface design.
On the Interface there are 6 specific buttons that will allow users to visit 6 instructional areas.
All six buttons will be avialable in all 20 Scenes.
My question is: is it possible to replicate the six buttons across all 20 scenes without having to provide unique instance names for each button in all 20 scenes so that the code to go to a scene will work in each Scene?
Or do I just have to code all 180 buttons individually as I go?
What I mean is for example.
The Lesson 1 button is replicated 20 times. the lesson one button has actionscript to go to the Lesson 1 Scene.
If I replicate the button to another Scene, I have to give it a different instance name, and update the code for that button each time and for all buttons.
View 6 Replies
Oct 11, 2009
I am making an interactive game for a school project that has an intro and a main part consisting of multiple scenes. I'm curious if I can have a song from my library play throughout multiple scenes. One song for the intro scenes, and another for the scenes that make up the actual game.
I also have a point in the game where you can get a 'game over' screen and an option to restart. I'm wanting the song to restart only at this point.
View 1 Replies
Jan 9, 2010
stop();
brain_btn.addEventListener(MouseEvent.CLICK, clickFunction);
function clickFunction(evt:MouseEvent):void {
[code].....
View 4 Replies
Sep 26, 2011
How do you refer to specific named instances of objects (buttons, movie clips, text fields, etc.) in different scenes? I made two scenes with button1 on scene 1 and button2 on scene 2. My code is below. The button2.addEventListener line gives the error "cannot access a property or method of a null object reference." Removing that line removes the error and button1 switches scenes. What's the proper way of referring to button2?
package
{
import flash.events.Event;
import flash.events.MouseEvent;
[code]....
View 2 Replies
Sep 2, 2010
I've been searching the internet for how to use scenes in flash games, and from what I understand it got some problems? MY problem is that i cant really understand what the problem is and I cant find i "clean" explanation.
Some say you dont should use scenes in game development, some say you should?? Im confused.
Another thing that i dont understand quite is the document classes. Should i have one document class for every scene or one for all of them?
If i have 2 scenes with it's own document classes, how do i switch between them?
View 4 Replies
