Audio Played From Timeline In Multiple Scenes?
Sep 14, 2009
I just started using CS4. I have one problem with audio played from timeline in multiple scenes. The first 2 sceense work fine but the 3rd one has problem. The audio would pick up the last brief second of the audio before the current one and then plays the current audio. The pick up includes the last second of the last audio of the previous scene or the clip from the current scene.
If I copy all the frames in the problem scene into a new file, audio plays perfectly.
Have anyone seen something like this and what is the cure?
View 4 Replies
Similar Posts:
Nov 18, 2009
Is there a way to do this? I am just now hearing of (and experiencing) all the downfalls of using scenes to create an interactive website. I may have to start the whole thing over at the mid point if there isn't a way to convert it into one It will save a week's worth of work!
View 1 Replies
Jul 19, 2010
I have a main timeline that has 27 different scenes. I have a movie clip that is an "on call" navigation menu for the main timeline. I can call the menu once, and it will go to the first place I want it to go. However, I cannot seem to figure out how to get it to go away to be able to call it again. I get the "must be child of caller" error. how to get rid of it each time I use it?
View 2 Replies
Jul 3, 2009
whenever I set my sound to stream and continue to make a movie with multiple scenes. The audio and video get disgustingly out of sync sometimes even off by 30 seconds. I just started an animation its only 10 seconds long with two scenes and the AV is already off by about 5 seconds. Ive worked around this by avoiding scenes altogether but i really don't want to have another 5000 frame scene. I discovered this problem in Flash MX and Im quite annoyed that it still has't been fixed 3 years later!
View 1 Replies
Mar 13, 2011
I have researched the subject for some time now and still haven't figure it out.I use midas3 library (Midi-actionscript3) to import midi to flash. I get each note-item on a timeline. I get the divisions value (192) and all of the "GET-TEMPO" elements are equal to 81.I tried a lot of combinations to get the actual time of the midi but still no good (timeline*192/60 for example).The reason I know it is not synchronized to the actual time is that when I visualize the notes as simple rectangles in flash - I check if they appear exactly to what the mp3 file plays (I have converted the midi file to this mp3 using simple conversion program)I have read a lot about how all is calculated but still haven't figure out the number I need to use to get it right (timeline * MysteriusConstant = ReaTIME, what is the value of MysteriusConstant? is it really constant? and if not how do I calculate how it is changed?)
View 1 Replies
May 24, 2010
i use loadmovie() to load youtube videos inside my flash website but when i load another video the old one doesn't stop, so i tried unloadmovie to destroy it but it seems that i did a mistake in my code
This is how the code looks to stop the old one an load the new:
vloader.unloadMovie();
vloader.loadMovie("http://www.youtube.com/v/Alw5hs0chj0&hl=fr&fs=1hJ-mPcGtC");
How to do that? use other objects or classes, i only want to edit that code.
Note: I have an empty MOVIE CLIP called "vloader" where i load the video player.
View 2 Replies
Dec 5, 2009
how many of you use scenes to get your projects done. I've been switching to a different scene for every new angle (I'm making a flash movie, drawing somewhat 3D perspective, and storyboarding it out like a movie.) I find it makes it easier to organize the timeline, and not take up as many frames per timeline. Are there any downfalls to this method? Because I'm early on in the production, and if there's going to be any problems down the road I'd like to know before I get too involved.
View 1 Replies
Oct 20, 2009
(I have on a server an mp3, and the server is HTTPS that requires an certificate and a key (TLS) and I need to get that mp3 on flash)I found some classes (Crypto) but there the TLS it's only partial implemented and support for client-side certificates is not implemented yet.So maybe some of you worked with this and you know more things about it.f you don't know many things about the TLS security how can I protect from download my music that is played with an AS3 audio player on my website
View 4 Replies
Feb 8, 2012
im trying to play an audio file through 2 certain scenes in my project. for some reason i cant manage to do it, only to stream in through the entire project.
View 9 Replies
Sep 8, 2009
Ok so here is my XML slideshow Actionscript:
ActionScript Code:
stop();
var xmlRequest:URLRequest= new URLRequest("graphicImages.xml");
var xmlLoader:URLLoader = new URLLoader(xmlRequest);
[Code]....
So I figured that the coding of separate scenes would work independently of one another, but I guess I was dead wrong, because when I apply this to a different scene and change the XML path for a different set of images, I get all sorts of conflict errors when I test the entire movie. I have my flash film set up so that each link send the user to a different scene, which plays a unique intro for each, and then the slideshow appears on screen and the viewer can navigate the images.
Is there a work around for this? Or am I going to have to break my flash movie into separate movies? Or should I just add a suffix to all my vars and functions so that they are unique for each scene?
View 1 Replies
Mar 6, 2010
I have a flash movie that moves ahead in the animation based off the audio. I've broken the movie up into a few scenes so that I can keep things really easy for myself. However because I'm using the same function to read the audio in the different scenes I'm getting a duplicate function error. Original Function that works great in the individual scenes but fails when played together:
Scene 1Scene 2import fl.video.MetadataEvent;
audio.addEventListener(MetadataEvent.CUE_POINT, cp_listener);
function cp_listener(eventObject:MetadataEvent):void{
[Code] ....
How to end the listeners after they have finished. I have no idea if that will work...
View 3 Replies
Mar 11, 2010
Because the player optimizes framerate, antialiasing etc dependent on the performance capabilities of the platform upon which it is running, it was nearly impossible to ensure animation syncronization w/ audio. If the audio were on the timeline you could set sync params to stream, but if the audio is loaded programically forget it .. well until AS3 ..The following code throttles the player framerate to lock step the animation to the audio .. not perfect but the principal works ..
View 1 Replies
Oct 25, 2009
The images for animation load okay. The sound loads okay. But the animation images need to be inserted in coordination with the sounds, which is difficult using only the ears There is a visual graph of audio levels in the library window, which I have seen appear in the timeline also but only momentarily. I do not know how to keep the audio graph on the timeline so as to know where to put the images. I can keep the graph open on the little library window when it is open but not on the timeline. how to keep the graph open on the audio track while I work on the image tracks.
View 1 Replies
Feb 7, 2011
I'm looking for an animation timeline or video/audio timeline ui or maybe like a gantt chart thing that can be adjustable. It's basically draggable icons in tracks and bars that you can adjust the size of.
View 0 Replies
Feb 27, 2009
I have a .fla project being created under CS4, using ActionScript 3.0, that consists of multiple scenes.
In the code attached to the first scene, I define some functions that are used as methods on buttons[code]...
View 1 Replies
Dec 15, 2002
Well, I know how to use the ifFrameIsLoaded to load one scene, but I was wondering if anyone could tell me the script needed to use the action to load multiple scenes rather than one.
View 1 Replies
Oct 2, 2006
I have a swf that is built with 3 scenes. The 1st scene is actually the prealoader for the movie.Now, in the last scene i load an external picture (picture.loadMovie(...)). I want to load the picture in the first scene,as i need it allready loaded when displaying it in scene 3. to avoid the loading delay.
View 6 Replies
Mar 9, 2010
1. Created a flash banner ad on the first scene. Take note they're all under frame one because I used movie clips for the animations (Movie clip ends on the 100th frame and not sure if I need to add a stop(); code there or place the gotoAndStop command). Anyways, moving on.
2. I created a new banner onto another scene which by now I have 2 scenes. Just like scene 1, all the animations and such are all under frame 1.
3. Placed an action script on the first scene to play the next scene.
gotoAndStop("scene 2", 1);
4. For the second I placed the action script:
gotoAndStop("scene 1", 1);
Output:It looks like my banner ad is flipping one scene from another without stopping. I know my action script is not correct. I know you folks are far more experience in flash, so I implore your wisdom.
View 2 Replies
Jan 23, 2009
is it better to use different scenes for multiple types of media rather than using a container to load and unload? scene 1 mp3 player scene 2 video player scene3 swif loader etc
View 3 Replies
Dec 21, 2010
I try to run a swf or html file of my fla file and it only works on my machine but not on my laptop. I have the latest flash player installed but it still doesn't work. My laptop works for single scenes swf and html but not for multiple scene file.
View 5 Replies
May 30, 2011
I'm having issues with switching scenes for this 6 scene short story, between scene 1 and 2, the text (thats in a text box from my character) in my project, slides in and out just fine... At the end of the code in the 1st frame, I added a code snippet (click to go to next frame and stop), and it goes to the next frame, code then tells to click button, then the text switches/slides in and out fine, the horse(another character) comes into the scene fine... Then again at the bottom of frame 2 now, I add the same code snippet to the click button, its suppose to go to scene/frame 3, where the text slides in and then out, but it's giving me output errors, AND I noticed when I press the (click to go to next frame and stop)snippet again, it inputs a totally different snippet(click and play next frame), which I manually change back to the other snippet, and even make sure that its suppose to go to frame 3, and then it still gives me output errors: Error:
Cannot tween a null object. at com.greensock::TweenLite() at com.greensock::TweenLite$/to() at CortesWP1_fla::MainTimeline/fredRun2() at Function/http://adobe.com/AS3/2006/builtin::apply() at com.greensock.core::TweenCore/complete() at com.greensock::TweenLite/renderTime()
[Code].....
For some reason the code in scene 1(frame 1) to scene 2(frame 2) is fine. Its the code from scene 2(frame 2) to scene 3(frame 3) thats giving me issues. I'm trying to keep the button I created on the bottom right corner of the scene, to be the one button that clicks from scene 1 through 6(dones not need a previous button).
View 3 Replies
Jul 13, 2011
I have a project that requires building the project using Scenes to chunk up different sections of an Elearning course.
I have created 20 Scenes.
Each Scene uses the same interface design.
On the Interface there are 6 specific buttons that will allow users to visit 6 instructional areas.
All six buttons will be avialable in all 20 Scenes.
My question is: is it possible to replicate the six buttons across all 20 scenes without having to provide unique instance names for each button in all 20 scenes so that the code to go to a scene will work in each Scene?
Or do I just have to code all 180 buttons individually as I go?
What I mean is for example.
The Lesson 1 button is replicated 20 times. the lesson one button has actionscript to go to the Lesson 1 Scene.
If I replicate the button to another Scene, I have to give it a different instance name, and update the code for that button each time and for all buttons.
View 6 Replies
Oct 11, 2009
I am making an interactive game for a school project that has an intro and a main part consisting of multiple scenes. I'm curious if I can have a song from my library play throughout multiple scenes. One song for the intro scenes, and another for the scenes that make up the actual game.
I also have a point in the game where you can get a 'game over' screen and an option to restart. I'm wanting the song to restart only at this point.
View 1 Replies
Jan 9, 2010
stop();
brain_btn.addEventListener(MouseEvent.CLICK, clickFunction);
function clickFunction(evt:MouseEvent):void {
[code].....
View 4 Replies
Sep 26, 2011
How do you refer to specific named instances of objects (buttons, movie clips, text fields, etc.) in different scenes? I made two scenes with button1 on scene 1 and button2 on scene 2. My code is below. The button2.addEventListener line gives the error "cannot access a property or method of a null object reference." Removing that line removes the error and button1 switches scenes. What's the proper way of referring to button2?
package
{
import flash.events.Event;
import flash.events.MouseEvent;
[code]....
View 2 Replies
Sep 2, 2010
I've been searching the internet for how to use scenes in flash games, and from what I understand it got some problems? MY problem is that i cant really understand what the problem is and I cant find i "clean" explanation.
Some say you dont should use scenes in game development, some say you should?? Im confused.
Another thing that i dont understand quite is the document classes. Should i have one document class for every scene or one for all of them?
If i have 2 scenes with it's own document classes, how do i switch between them?
View 4 Replies
Aug 4, 2008
I want to display an external swf across multiple scenes.whether it is in the background or whether i put one code on the first scene for the movie clip to load it and a different code for the same movie clip on the other scenes.
View 3 Replies
Apr 29, 2002
I currently have a movie, about 12 scenes long. I have a sound control that loops the track I have the user select repeatedly. But because I wanted music to always play unless they manually turned down the volume in my controls I load the music each time the main scene is loaded... This ends all of the other sounds and just restarts the first track in my list.
Here's the code:
For the main frame, inside a movie clip placed on scene 1:
stop ();
stopAllSounds ();
setProperty ("playing1", _visible, "1");
setProperty ("playing2", _visible, "0");
[Code]....
All I want this to do is keep playing the track the user selected, and not have to reset everytime the main scene is loaded...
View 1 Replies
Aug 20, 2009
1. Need it to do: when the correct word is placed in the box, it stays there. Currently it disappears. I think this is because we are removing the child, but if we don't remove the child - it stays in all scenes and frames and interferes with being able to drop more words in the target box.
2. If you incorrectly guess, then correctly guess.. the incorrect guess is visible throughout the rest of the scenes and frames (this is a big one, i need this fixed somehow).
3. Not as important, but in order to make this work, I had to go into each scene and make sure all my variables were named differently then the other scenes. There must be a way around this.
[URL]
View 2 Replies
Mar 15, 2010
I have a replay button on the last scene of my .fla and I want - when clicked - to
replay the .fla from frame 1, Scene 1.
I've used the following code:
stop();
ReplayBtn.addEventListener(MouseEvent.CLICK,onClic k);
function onClick(event:MouseEvent):void {
gotoAndPlay(1, "Scene 1")
}
on the last frame of "as" layer, but nothing happens.
View 3 Replies
