ActionScript 2.0 :: Sound Grabbing And Playing From Next Scenes
Jan 9, 2012
I simply don't understand why now at the end of my project, the last 5 frames are giving me such trouble. I have five scenes. The first scene plays fine. Second scene plays fine until just the end, then it grabs audio from the third, fourth and fifth scenes and starts playing them. Here is the site: [URL] (it is a site for children in Swedish) if you click the 3rd button to the right (3 Delan) you will notice that the sound starts truncating and then starts grabbing and placing into scenes before the next scene.
whenever I set my sound to stream and continue to make a movie with multiple scenes. The audio and video get disgustingly out of sync sometimes even off by 30 seconds. I just started an animation its only 10 seconds long with two scenes and the AV is already off by about 5 seconds. Ive worked around this by avoiding scenes altogether but i really don't want to have another 5000 frame scene. I discovered this problem in Flash MX and Im quite annoyed that it still has't been fixed 3 years later!
I am using AS2 in CS5.5.I am creating a project for a class that introduced me to adobe flash. The issue is I have gotten to a certain point about 15 scenes. During say the 15th scene scrolling through the timeline animations works fine, playing it on test scene works fine. When I go to play it on test movie it stops at a certain point. At first I thought it might have been a misplaced stop action but there is none to be found. The weird part is every other scene I create after that continues to freeze as well, the images are there, but the animations won't play. All my previous animations play before those with the issue, it's justThese new ones won't play for some reason in test movie, but work completely fine in test scene and the timeline.
im trying to play an audio file through 2 certain scenes in my project. for some reason i cant manage to do it, only to stream in through the entire project.
I'm still a newbie at this program, I've wasted a lot of time tryin to figure out and resarching for solutions on how to play the 2 scenes I have created in flash. Scene 1 is a plane animation while the 2nd one is a time based animation that depends on the time in your computer. The movie should be played scene 1 first then scene 2. I have tried the gotoAndplay AS script but it doesnt work.
I have created a X-mas card for my company. When the card opens, the 3 circles are buttons to different scenes within Flash. The text in the bottom left is a button to the final scene.
The card can be viewed here: [URL]
1) When I click on the circle button that has the red garland and tree ornaments in it, if you listen close at the very beginning of the scene, a squeek sound plays. I use this squek sound in the hamster wheel movie symbol used in other scenes, but not in this scene. I don't even have the sound in this scene of the Flash project anywhere. I can not figure out where it is coming from.
2) Does anyone have some optimization tips? My project file is huge and a lot of the people we will be sending this out to probably don't have the most up-to-date processers. Should I split each scene into it's own Flash movie that is only loaded when the button for that scene is selected instead of the whole thing loading?
I'm doing a project that I have to use scenes in, I have a sound object that i want to be able to control in all scenes. I set up global variables for the sound object and a boolean to check if the sounds currently playing like this : PHP Code: _global.sound1= new Sound(); _global.sound1.attachSound("song"); _global.soundplaying = 0;
In each scene I have two buttons a stop and a play button, Heres my code for play: PHP Code: if(!_global.soundplaying){ _global.sound1.start(); _global.soundplaying = 1; }
And stop: PHP Code: _global.stewielaugh.stop(); _global.soundplaying = 0; Doesn't seem to work, if I press play in scene one and go to scene 2 and then return to scene one the sound can be played again on top of the already playing sound object.
I've set a music sound to play across three scenes in my movie. However, when the user clicks to enter the fourth scene, I'd like the music to stop. Simple enough.
Here's the problem...the fourth scene contains individual keyframes in the scene where I have separate voice overs for each frame. The user navs forward or backward among the scene's keyframes using arrow buttons for forward and backward. How can I have the voice over stop playing on frame 1 if the user clicks the arrow to go to frame 2 if the frame 1 sound isn't finished playing? Frame 1 plays out until finished, even if the user has clicked to go to frame 2.
Then, on return to the main scene where the general music file played, I'd like it to resume playing upon the user clicking 'return home.'
Incidentally, I set up my sound files to play on a soundtrack timeline.
I have a sound clip that I'm loading externally into my flash file. The code I'm using looks like this and is placed in the as layer on the first frame,
var mySound:Sound = new Sound(); var myChannel:SoundChannel = new SoundChannel(); var myTransform = new SoundTransform(); var lastPosition:Number = 0; mySound.load(new URLRequest("introaudio.mp3")); myChannel = mySound.play(); [Code]....
I am creating a game that has 6 movieclips all on the main time line of the game. Each movie clip has three buttons that when clicked plays, pauses or stops a sound clip.When I press any of the sound clip play buttons that sound starts playing, the problem is when I click any of the other sound clip play buttons those sounds also start to play. Is there a way I can disable the other sound clip buttons while the current sound is playing then enable all of the buttons when the current sound has stopped.
This is the code that creates one of the sound objects
I have only two days to get this working and handed in. My class did not teach actionscript, the code for keeping sounds playing through multiple scenes was provided for us :
var mySound:Sound = new soundtrack(); mySound.play();
Unfortunately this doesn't seem to work in actionscript 3..... and my entire movie is actionscript three. It won't let me save down or convert it or anything.... and I can't get my stuff into another file without screwing it all up.
I currently have a movie, about 12 scenes long. I have a sound control that loops the track I have the user select repeatedly. But because I wanted music to always play unless they manually turned down the volume in my controls I load the music each time the main scene is loaded... This ends all of the other sounds and just restarts the first track in my list.
Here's the code:
For the main frame, inside a movie clip placed on scene 1:
So I made a few buttons with sounds within them and when I publish it they work just fine. But what I want them to do is;
Say I click a Button.The sound starts playing.Then I click it again, before the sounds done playing.I want it to stop the playing sound and start playing the button I just clicked on, whether it be the same button, or a different one.Right now it just ends up sounds like an echo because it'll play it as many times as you click it.
Situation: I have a project I'm working on where I have buttons which make click sounds on their own, and also take you to other scenes where a sound will immediately play. There are also three movieclips involved, total my base movieclip and two independent ones that load on top of that. Problem: I want to include a Mute button so that you can turn off all sounds, but can't figure out how to do that..As I understand it, stopAllSounds won't work for me, because as soon as someone hits another button, a new sound will play.
Most of my flash movies have been reasonable sizes, but the one I'm working on now is kind of a beast. It's up against the 16000 frame limit, so I'm looking into ways to chop it up. The problem is that I need a way to keep my background music playing across multiple scenes or movies. Is there a way to start a sound file in one movie, and have it continue when another scene is loaded or when a second movie file is loaded with ActionScript?
I'm trying to play a sound using a technique found here (play the sound by sampling raw sound data gathered from the original with extract()), with the difference that the mp3 sound is embedded in the swf, not loaded externally. This is my code:
var soundBytes:ByteArray = new ByteArray(); var mp3sound:Sound = Sound(new Sound1_design()); // this is the embedded sound mp3sound.extract(soundBytes, int.MAX_VALUE);
[Code]....
This works, in a way, except that the resulting sound is distorted (it has a kind of a metallic ring).
I am loading small sounds dynamically with the loadSound command. These small sounds are activated with a rollover. see script below. This works ok. however. i want the first sound to keep playing while the rollovers load sound. a bit like playing the piano. This works ok when i import all the sounds into the library and place them on their very own button. however the size of the flash movie increases to 140k. whereas when i load them dynamically the size of the movie is 20k. obviously i want to load dynamically.
But with dynamic loading each sound stops when another sound is rolled over, so that there is only ever one sound playing at once. I need to load the sound into a different level or something, so that the first sound can keep going while the smaller, shorter sounds play over the top. this is my script below. The first sound loads when the movie starts. This is the one i want to keep playing. Then there are the smaller ones with rollovers. does this make any sense? there's actually 13 little sounds.
I am trying to build a very simple Flash app in CS4. All I want to do is have JPGs overlayed over a sound layer in a series of scenes. I want a basic intro scene that ends w/ a table of contents from where you can click to view any scene. At the end of each scene is a frame where the user can replay the current scene, return to the TOC frame in scene 1 or proced to the next scene. I am having two SERIOUS problems.
1. For some reason my movie is NOT stopping at the "stop ();" action at the end of scene one. the action is on its own keyframe in the timeline, but when I "test movie" it just plays right past that to scene 2. 2. I obviously need multiple buttons on a scene to do different things on click. Does it really have to be as complicated as it seems to have multiple buttons all do different things on click? I keep getting told I have duplicate actions when I have two buttons on a page that do different things on click. I have named each button instance a unique name and written the gotoandplay click event using those unique instance names.
ok so i have a button that plays an animation for fire when held down. and when realsed goes to and stops and frame one. when it reaches the end of the time line it goes to and plays at frame 10 and goes back to the end of the timeline. I have a sound for the fire animation that plays for the effect. The problem is the sound keeps going untill its over even if the button isnt held down. and when the playhead reaches the end of the timeline it goes to and plays and frame 10 and it replays the sound. if i hold it down it will just keep playing the sound over and over from start to finish. what i want it to do it when i hold the button down i want it to play the sound and when released it stops the sound where ever it is at. I also dont the sound to play again if there is a sound already going to stop it from playing 20 sounds at one time it gets loud and you need asprin after about 5 seconds of that.
I am trying to embed some sound controls, and have hit a dead end. I made my play and stop buttons, imported my mp3,, assigned it proper linkage, and inserted this AS2 :
[Code]...
The buttons are named "play_btn" and "stop_btn" respectively. When I export it or preview it, hitting the play button does not do anything.... I hear no sound. What could be up with this?
Im making an animation and in the 3rd scene i have a deer that screams and the sound plays way to early. I had to drag it out way past the frame where it opens its mouth for it to play at the right time.
I have no idea whats wrong this has happened before. I really dont want to have to guess on where to put the sound for everything a character says.
Back to my nightmare project, I've embedded sounds in the project that play based on certain user actions. They play fine for me (PC), but my customer is telling me they don't work for her (Mac).Would there be ANY reason a sound would play on a PC but not a Mac?I've told her to update her Flash player to make sure it's current and to make sure her speakers are on and the volume is up, but no sound.Okay, the REAL reason this isn't working is user error based on everything else I'm told that's happening and not happening, but I need to cover my bases and see if there really may be a reason sounds won't play on a Mac.
I have a playhead that moves across the screen and when it hitTests a movie clip it plays a sound. all is working fine except that it will only work the first time it is played. The playhead is controlled by a button. I am working in Actionscrpt2. Here is the code on the movieclip:
onClipEvent(enterFrame)[code]....
In the begining I was having trouble because the hitTest was playing the sound over and over but the above code sorted that out. I think that the new problem was created by fixing the old one.
I want to achieve the effect of a computer startup. IE, it only plays -once- and then doesn't play again for the rest of the time, even if the user comes back to the same menu. How do I get Flash working that way? I've tried variables to no effect... it doesn't want to change the variable condition.
I have another one to get off my chest.I am basically doing a spinning wheel game - i want the sound to play each time the Stopper hits a new prize section of the wheel.In my code, from my EnterFrame function, i call my playSound function but the sound file just never plays .. i know the function is being called as i can see it in trace.I suspect that because the EnterFrame is constantly being called, that the sound file - because it has determined it won't complete - it ignores it totally.[code]
Anyone know why this keeps playing the same sound over and over?
If I call it using: Code: var sounds:src.snd.SoundManager = new src.snd.SoundManager(); // This isn't how I do it, but ... you understand. sounds.queueSound('libsound1');
I have a small sound effect (less than 10KB) I have placed on my timeline. When I test it directly in flash, I can hear the sound effect, but when I CTRL + test my movie, I can't hear the effect?
I have several buttons on the stage, each one will play an external sound file when clicked. If the user has clicked say button_1 and then clicks button_2, I need to stop the sound currently being played, before starting the sound from button_2
I have a game of you controlling a rocket and avoiding walls.When you hit the walls the rocket goes to frame 50 and plays an explosion sound and an animation then the playhead stops at frame 70.But for some mystical reason when the rocket is still moving (as in not blown up yet) the sound keeps repeating over and over. I placed a trace in the rocket's enterframe event to check its currentFrame but it stays at frame 1 like it should. And yet the sounds still keeps playing. This is just infuriating.
