ActionScript 3.0 :: Snap Image Into Place On A Movie Clip?
May 18, 2010
I have my stage. On the left side, I imported an image to the stage and converted it to a movie clip. I then added code so that it can be dragged and dropped. On the right hand side, I created an area for it to be dropped into. This is just a rectangle which has been converted to a movie clip. When the image is dropped, it resizes to the size of the movie clip rectangle. Is there anyway to make it snap into place inside the movie clip?
View 5 Replies
Similar Posts:
Nov 10, 2009
I have movie clips loading in dynamically using an XML file, and the duplicate movie clip function. I need to be able to select one of those movie clips, drag it to a desired position and have it snap to place. As for right now, I'm using :
[Code]...
View 3 Replies
Aug 17, 2010
I got four buttons that pull up images in a slide show. I want the fourth button to first pull the image in place and THEN shut down the movie clip. I thought this would be easy, but no. Unfortunately I can´t attach the fla-file on this forum. You could take a look at this:
[Code]...
It works in a sense. The movie falls into place when I click the button and the movie quits when I move the cursor. But it also means you might shut down the slide show involuntary when you move the cursor going for any of the other buttons. What can I do? I could point out that I'm not working with any frames here.
View 2 Replies
Aug 26, 2009
i have to sanp images into tile or grid form. but my images are in 4 different sizes in height/width. i have to place all images in side by side like tiling.
View 1 Replies
Apr 8, 2005
how can i duplicate a movie clip and then place it on a certain place on the stage
View 5 Replies
Feb 4, 2004
I have a movie clip, that has various codes attached to it to snap to areas of the screen. If I apply the duplicate movie clip command to this, the second instance will have a new name right? so how can I change the code that addressed the orginal movie clip to relate to the new instance with the new name?
View 5 Replies
Apr 8, 2005
how to trace a movie clip and place it into an empty movie clip i create at the begginning of the movie
View 5 Replies
Sep 3, 2010
I am toying around with the idea of making a few card games, and was testing some code trying to get an Ace of Spades to snap to a slot.But for some reason the card isnt snapping... with the traces I ran.. it looks like it is snapping to the center. But I changed the center point with the free transform tool... so the point is in the upper right but its still not snapping.You can see by the traces I use, that the home1X = 36 means it is finding the corner
View 1 Replies
Sep 10, 2003
I have a flash quiz type thing, which involves the user dragging quotes onto a choice of 2 movie clips then clicking submit to get the correct answers etc (you know the kind of thing).My question is would it be possible to self tidy the buttons when they are dragged onto the MC's? For example quote 1 is released on the MC and it snaps straight into position 1, then when another quote is released it snaps neatly underneath into position 2 and so on..The difficult part is that whatever qoute is dragged first, it needs to snap to the top, the second underneath, and so on.
View 8 Replies
Jul 23, 2010
I'm new to Flash (sort of - I used it a bit back in 1999-2000, but it's changed a LOT since then). I'm making an educational game for my company that involves dragging labels from a word-bank to their correct position on a diagram. I want the kids to be able to drag any one of the five labels and move them to any one of five marked positions on the diagram. I'm using Flash CS5 with Actionscript 3. I used code snippets, so that each individual label has the following code associated with it:
[Code]...
View 22 Replies
Dec 8, 2006
I'm new around these parts (I literally signed up about 3 minutes ago!). I'm a high school student who just started using Flash about a month or two ago, so I'm far from advanced, though I have tackled some of the basics. In class I'm working on an art portfolio site but in my spare time I'm making a virtual dress-up doll (you know, the kind where you can pick up the clothes and drop them on the figure to mix and match outfits).Learning how to make drag-and-drop objects was very easy and there are lots of tutorials on it but what I can't figure out is how to get objects to "snap" into place. I want it so that the doll's hairdo's snap into position because they look kind of stupid when placed incorrectly.
View 7 Replies
Nov 4, 2003
I am using a drag n drop (snap into place) routine. MC1 is dragged onto mc2. I want a button on mc2 to make mc1 go to its original position and reset itself. As it is mc1 goes to frame 2 where the frame is empty.
View 1 Replies
Oct 6, 2009
[URL]
At step four, it says to
4- Inside another Movie Clip named "Limits" place "Pads" and "Wall". Pads' instance name should be "Pads" and Wall's instance named "Border". We put the Wall and Pads inside the same Movie Clip, to use it to know when the ball collided. And we couldn't put everything together because the ball behaves different if hits the Wall instead of the Pads.
How do I create this movie clip and put the other movie clips "inside it"? Also, if anyone can find out, where do I put this movie clip? Do i put it at the same spot as the wall?
View 7 Replies
Feb 23, 2010
How could you place a movie clip on a click in the same position you click?
View 11 Replies
Feb 18, 2004
I've only ever used tweening to move an object on the stage which always looks choppy. Say I have a movie clip that is just off the stage and I want to bring it to the center of the stage nice and smoothly starting slowly, getting faster and the slowing down,what actionscript would I have to use. In fact to make it easier, here's a FLA which uses traditional tweening to move the object, what must I do with it to get rid of the tweening and replace it with a nice smooth actionscript?
View 6 Replies
Dec 29, 2009
I'm trying to figure out how to use addChild to place a movie clip. I've got it working, but I can't get it to load in the bottom level of the movie. No matter what I do, it seems to load on top of everything else. I'm definately a newbie with AS3, and had only a little experience with AS2, but the load / unload movie seemed so much easier than this. I've found tutorials on addChild, but none of them specify how to load into a specific layer/level.
[Code]...
View 2 Replies
Feb 18, 2004
Ok, I've only ever used tweening to move an object on the stage which always looks choppy. Say I have a movie clip that is just off the stage and I want to bring it to the center of the stage nice and smoothly starting slowly, getting faster and the slowing down, what actionscript would I have to use.
In fact to make it easier, here's a FLA which uses traditional tweening to move the object, what must I do with it to get rid of the tweening and replace it with a nice smooth actionscript?
View 6 Replies
May 20, 2011
Im trying to do a drag and drop system where the user can drag a movie clip into an area. Although i would like to make it snap to a target instead of just sitting wherever it lands in the area. Problem Two:
The next thing i am trying to do is when the user has a movie clip on a target already, and trys to put another movie clip in that target area, it will replace the one thats in there and go back to its current position. Here is the script of what i have done so far:
[Code]...
View 14 Replies
Sep 15, 2011
I have created a empty movie clip . And i,m brushing on that .(i.e)Filling(Begin Fill) it with ellipse for every click .
How do I check whether it is filled at particular place .(say 400 x 400 from x=0,y=0)?
View 3 Replies
Jan 25, 2005
Inside a MovieClip I have many movie Clips like JPG and SWF files that are loaded from the server.And I need to take some of these movie Clips to other places, like the _root or to a other movieClip.I�m Trying to do this with duplicateMovieClip, but it apear to be impossible.
See this exemple.
movie = movie1.movie2.duplicateMovieClip("moviex", 1000);
trace(movie);
[code]....
View 4 Replies
Oct 10, 2011
I have created two text boxes one is source and another is output. I want to place the output box inside a movie clip so that i can move it. How can i possible this ?This is my code,
package
{
import flash.display.Sprite;
[code]........
View 3 Replies
Aug 6, 2009
I was wondering if anyone could tell me how and if it is possible to draw a line/ circle and place a movie clip on it and get the movie clip to go round the circle by placing the left and right arrow keys on the keyboard.
View 0 Replies
Aug 19, 2009
allow the user to clip a button and then place a sybmol (either movie clip or graphic) where the user clicks. I would like to use AS2. The project is simply to label a supply and demand curve graph and user needs to plot, or place points wherever they want on the canvas.
View 3 Replies
May 4, 2010
Neste caso não quero criar um movie clipe apartir de código. o movie clip , já existe no palco.o traço que aparece no canto inferiro da tela indica o arquivo externo, mas como referência o traço está no centro do arquivo. a referência é o quadro cinza.
Código:
stop();alvo1.loadMovie("conforto.swf");
o movie clipe esta instaciado como " alvo1" .
estou ultilizando o action script 2.0.
In this in case that I do not want to create one movie clip to apartir of code. movie clip, already exists in palco. the trace that appears in it I sing inferiro of the screen indicates the external archive, but as reference the trace is in the center of the archive. the reference is the gray picture.
stop (); alvo1.loadMovie ("conforto.swf"); movie clip this instaciado as " alvo1" .
I am ultilizando action script 2.0 the reference is the gray picture.
View 5 Replies
Oct 10, 2011
I have created two text boxes one is source and another is output. I want to place the output box inside a movie clip so that i can move it. How can i place the output text box inside a movie clip ?
code is bellow,
package
{
import flash.display.Sprite;
import flash.display.Stage;
[Code].....
View 5 Replies
Apr 18, 2011
I have to use the old drag and drop code on my movie clips, but the problem is when I drag the movieclip to the area on my .swf file once i release it, it sticks to the hand mover.I am encloseing the action script I am using could someone or kglad tell me what is missing from the code so that once it is released it will not stick, see code belowcircle.onPress = function(){ startDrag(this);}circle.onRelease = function(){ stopDrag();}
View 3 Replies
Jun 2, 2003
I am new to actionscripting and I figured that the best way to learn was to do something that interest me. Currently I am trying to do an interactive clip where I need to find the script for "Snap to Place". I was told that Director had this built in "Snap to Grid" but I think Flash can achieve this too just that the tutorial haven't been posted.
View 14 Replies
Nov 26, 2009
So I have two circles and a square on stage, myCircle1, myCircle2, and mySquare. You can drag the two circles, if you drop either one outside the square it'll snap back to where it originally was, if it's touching the box it'll snap to the center of the square.
I want it so when the second circle (either one) snaps to the center of the square, the first one will go back to it's original co-ordinates. So only one circle can be in the square at any time.
I've attached my as file with the current code.
View 3 Replies
Apr 27, 2007
Is it possible to save a movie(whole or particular movie clip) as a image formate(.jpg or some other) by clicking a button which is available in the same movie, at a "Runtime" through "Flash 8 Actionscript 2".
if it is possible, please explain me how to do.
View 2 Replies
Jul 20, 2010
I have a dragable gallery of images separated with "contentSpacer". I'm trying to make each image "snap" when it is close to the centre. I've modified this [URL] and got it working, to a point. My problem is the x value that the gallery being snapped to needs to have "contentSpacer" subtracted from it: if its the third image in the sequence then it need to have ("contentSpacer" * 3) subtracted from it (as there is three gaps between the start of the gallery andthe end of the third image, get it?). In the code below I've put (proximity - (contentSpacer * j)) but "j" does not exist right now, you see what I'm getting at? The code doesn't seem to be aware what image it is snapping.
ActionScript Code:
currsubGallery.onRelease = function() {
this.stopDrag();
cursor.gotoAndStop(1);
//snap "current" fullSizeimage to project boundraies onRelease
if(Math.abs(Math.floor(this._parent.subGallery._x / subGalleryWidth)
[Code] .....
View 1 Replies
