I have downloaded this .pls file from the LiveATC website but flash does not seem to stream this audio file using the code:
ActionScript Code:
var s:Sound = new Sound();
s.load(new URLRequest("kjfk_co.pls"));
[code].....
I have installed flash media server, flash cs5, media live encoder to be able to view my webcam feed via my website. Now in addition to these, i started streaming to localhost, and installed a dns updater which updates a name server according to my current ip. Then i wrote this dns address in the feed's source from flash 5 as rtmp://thednsname.somedns.net/live/livestream
so far so good, i also forwarded the ports 1935 incoming and outgoing from modem to my computer as well (because 1935 is said to be the default port number for media server). firewall -> closed (just in case); and my internet provider doesn't block ports...started the media server (with admin privilage in 7), started the live encoder, connect to localhost, start live feed.
NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.
I have been working on a Flex application that sends a feed from my webcam to the Flash Media server. The application connects to the server fine but for some reason the camera is not sending anything to the Media Server. I am pretty sure that the answer to my question is really simple but I need another set of eyes to llok at my code and tell me what I am doing wrong.
[Code]....
I'm recording a mono audio stream using a PIC at 8-bit 8Khz and streaming it raw to another microprocessor that houses a web server. I'm currently buffering the data and turning it into a wav file that gets played in the browser. What I'd like to be able to do is continuously stream the audio as it's being recorded without putting a lot of encoding overhead on the second processor. I've been searching but most searches turn up just streaming from a stored file, but since the file size isn't known ahead of time I'm not sure how to do this without the overhead of mp3 encoding.
View 2 RepliesI have an mp3 player, that I would like to add live streams to.
here is an example url of what I'd like to stream. [URL]
is there a way to do that in flash AS3?
Is there a way to stream and audio line level feed rather than the audio from a computer's microphone?
View 1 RepliesI am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
I am new in action script 3.0. i am trying to build an audio player which will stream audio(mp3 etc.) from wowza media server. the player needs to have a play button, stop/pause button, a play progressbar and a volume scroll bar. i am using NetStream object to paly the audio
View 1 Replieshow to create a live RSS stock exchange feed using AS2
View 2 RepliesI'm trying to use the NetConnection class to connect to a live video feed on an external server. I have it set up to start playing my video when the user clicks a Play button, however, this appears in my output every time I click the Play button:
ArgumentError: Error #2126: NetConnection object must be connected.
at flash.net::NetStream/ctor()
at flash.net::NetStream()
at Over/connectLiveStream()[Over::frame2:31]
Here is the (I think relevant) code:
if (playVid.label == "Play") {
nc = new NetConnection();
nc.objectEncoding = flash.net.ObjectEncoding.AMF0;
nc.connect("rtmp://my.rtmp.server:1935/live/");
nsPlay = new NetStream(nc);
nsPlay.play("livestream.flv");
}
i am wondering if it is possible, and if someone would be so kind to help me code a scene where two thumbnails, side by side, are flipped up and down, and back up, each time revealing a new random image culled from a feed such as a flickr feed (or any others available, is there a random google image search feed that i dont know about?).if this is possible, i would need assistance in coding the script so that the flash movie is dynamic and pulls image data in real time from the feed, displays it within the two thumbnail cells, and for added headache pain, i would hope to also learn how to code a random image to be selected based on a visitors date/time stamp.i am a graphic designer with rudimentary knowledge of action script 2.0 (yikes!) so please, go slowly / explain yourself. i have searched the forum, but i cannot find any previous threads that combine the random image generator idea with a live feed (unless if i missed it, please point it out to me if you can find such threads).
View 1 RepliesI installed FME 3.0 + FMS 3.5, and can get live stream on clients.
Now I want to record the live streaming from FME on FMS, I changed the fms.ini:
LIVE_DIR = d:Program FilesAdobeFlash Media Server 3.5webrootlive_recorded
but the streaming didn't be recorded in this folder.
Is there a tool, any type of programming library, or a way to capture live feed of Flash video and save it? I don't want to capture the screen but rather like to capture the actual feed.
View 1 RepliesI am building a menu that is to run on a mobile device.. the menu is populated with data from a live xml feed. and then suppose to be both dragable and "throwable" - meaning if you swipe up or down fast is scrolls with a little velocity physics slowing down over time. I wanted this menu to use as little processor power as possible so I am using scrollRect along with all my menu items being set to
cachAsBitmap= true;
Its working for the most part except once it stops scrolling and the user mouse downs on it again to start dragging, it tends to jump up or down like 20-100 pixels.
ActionScript Code:
menu.addEventListener(MouseEvent.MOUSE_DOWN, menuDrag);
menu.scrollRect = new Rectangle(0,0,stage.stageWidth,stage.stageHeight);
addEventListener(MouseEvent.MOUSE_UP, menuStopDrag);
function menuDrag(e:MouseEvent):void{
isDragging = true;
[Code] .....
Is it possible to create a live video feed from a webcam etc into Flash?
View 6 RepliesI am streaming to live videos with audio to our webpage, each with it's own accompanying audio. On my laptop, I could stream them without any trouble but it would overheat so I had two new computers built just for encoding. Now, on the new computers, the 2 videos stream fine but only on audio file works at a time. The other just gets hung up on one note of sound and repeats very annoyingly over and over.
View 2 RepliesI think it is loading the whole audio first into the swf, but I would like to get confirmation from someone more knowledgible.[code]I want it to stream the audio when the button is clicked only so that 100 of these swf will not slow down a whole webpage from loading.[code]I only start getting concerned when I noticed that on FF and Chrome, the page loads really quick but when I open the page in IE, it takes a very long time for the page to appear.
View 3 RepliesWe (the university I work for) want to add an IP camera to the top of a building (so it has to be IP, we can't put a machine up there, so USB is out of the question) to stream a live view of the quad. The problem is, I can't find a way to stream any IP Cameras through the flash live encoder. I tried a camera by Axis, but their capture driver only supported MJPEG which the live encoder does not.
View 3 RepliesIn using Flash Live Media Encoder to aquire a webcam video and to send it to a Flash Media Development Server 3.5 for live video streaming to one client by the same local network.The client device doesn't support flash player but is able to read and play flv video format.So, if i get a flv video file from apache 2 it works.But I don't know how to get a live video streaming from the server. The client application needs a flv file to point to.Does FVS generate a flv file for live video streaming?
View 6 RepliesI'm developing a site with PHP, now i need to show a live video 24h pear day that is displayed by a webcam.
Is there any possibilite to integrate a tool to do that? I think i'll need to use Flash and PHP.
How would I go about this? any one know of any good tutorials of how to stream sounds from a recording? any special type of server i would HAVE to use?
View 1 RepliesAm using adobe media development server successfully able to make live streaming on RTMP
View 1 RepliesHow i can use IP Camera with FMS for live video streaming.
View 2 RepliesI have an RSS feed that is being read into dynamic text fields. The content of the RSS feed needs to be updated like every minute or every half minute, as there are constantly new items in the feed. Is there a way in ActionScript to reload the feed in interval times, or maybe reload the whole script?
View 1 RepliesI'm finally getting the hang of the Dynamic Streaming of live video content via FMS 3.5.2 and FMLE, and to a lesser extent, the DVR functionality that has newly been made available.
Inquiring minds want to know... is it possible to add DVR functionality to live Dynamically Streamed video content? In other words, I want to be able to provide DVR capability to our live videos that are being streamed at 3 different bitrates.
Is that currently possible? Jodi, can you ask David Hassoun, who seems to be the leading authority at the moment, if this is possible, and if so, if there's a tutorial we can access?
I was pretty confused while stetting up a FMS and reading the docs. Live Streaming is by default enabled for everyone without password. Then I discovered and installed the authentication module. But this does not work and is not well documented. Also the download page states that it will work with FMS but some lines below it is stated that: "the Flash Media Server Authentication Add-In is only available for the Flash Media Interactive Server and the Flash Media Developer Server. This Add-In does not work with the Flash Media Streaming Server." hmmm. Confusing. How can I prevent that everyone is using my server for live streaming?
View 16 RepliesI've tested an exciting tutorial about streaming live video with Flash Media Server 3.5..every thing went good and i could see my webcam broadcast from my machine through my web site but unfortunately.I can't see it from any other machine.I'm using Microsoft windows XP SP2and flash media live encoder 3but my web server run UNIX is this a problem?
View 15 RepliesI have live streaming but problem is that it is stopping and continues every 2-3 second, I do not know which issues causes it.
View 3 RepliesI'm hoping there's a simple answer to this. I'm attempting to stream a live event using FMLE and FMS. The first thing that throws me off is that I cannot push the stream to the server using RTMPE, only RTMP[T]. I assume this is because the the encryption is handled by the server and not the encoder. However, for the sake of security I would like to disable RTMP connections from the flash player to the server. Yet it would seem that if I incorporate the server side scripting described here [URL] (namely the changes to my main.asc file), that my server would reject an RTMP connection from FMLE? Is that correct? If so, where do I go from here? Can I broadcast a live stream using RTMPE only? Do I need a different encoder or something, or am I just missing a very simple point?
View 1 Replies
