ActionScript 3.0 :: Timeout - Load A Bunch Of External Images And Then Print Them All In The Same PrintJob
Apr 21, 2009
I'm trying to load a bunch of external images, and then print them all in the same PrintJob. For testing i tried 40 images at around 599kb. I load all images using Loaders and check that all images are fully loaded (by Event.INIT) and put the images in separate Sprites.When this is done i start a new PrintJob, loop throug all my images and add them to the PrintJob, and then PrintJob.send(); At least this is what i want to do. What happens is this:
[Code]....
View 8 Replies
Similar Posts:
Dec 20, 2008
I'm having an issue where when I try to print a larger image via printjob one of two things happens. One either the job fails or two the output of the image is literally diagonally cut off. I am simply passing the stage to the print job. I've tried both with and without using printAsBitmap.
View 1 Replies
Nov 5, 2009
So what im planning to do is load a whole bunch of images at once. Flash doesnt know how many images it will load though, so this is what im thinking..
PHP Code:
var l:Loader = new Loader();
var urlreq:URLRequest = new URLRequest("[URL]" + i + ".jpg");
l.load(urlreq);
if (AN ERROR HAPPENS meaning the url is invalid){
//Stop and continue with operations
} else {
//Do stuff with the loader and image
}
How would I check to see if the loader has an invalid url?
View 3 Replies
Nov 23, 2009
I am currently checking if something is true or false at an external link. What I want to do is, integrate a "failsafe" function, so if the external link should be down I'll display something special. I'm not sure how to do this, but what I had in mind was to define x amount of seconds and if nothing has been received by that time, terminate the call to the link and do something else.
What I currently have is:
ActionScript Code:
var loadContainer:LoadVars = new LoadVars();
loadContainer.onData = function(resp:String){
if(resp.indexOf("true")!=-1){
//true
} else {
//false
}}
loadContainer.load("[URL]")
View 3 Replies
Nov 8, 2010
How can i set print time for flex printjob.
when the time is ripe my program will automatically print my job
eg. i want to print my job at 11.00 AM i will set print time in my program to 11.00 AM when time is 11.00 AM flex will automatically print my job
View 1 Replies
Feb 21, 2009
I want print some sprite which is created by "draw(someSprite)" method in BitmapData.Everything is fine but... I want put some margins in my print page, and I don't know how .Of course I could set right position of my "someSprite" but I don't want change my site to print it. (Using Rect... in BitmapData.draw() and addPage() dont work.) Simple flashdevelop project is in zip file.
Code is below
ActionScript Code:
package
{
import flash.display.*;
[Code]....
I don't want to change position of "printBitmap" - alternatively "bitmapData" - or anything else.
View 0 Replies
Dec 7, 2007
how do I get the printjob to print as many pages as my movieclip needs? If I have this code:
[Code]....
how would I set pj.addPage to keep adding the mc till all the mc had been loaded?
View 6 Replies
Aug 11, 2009
im trying to print something from flash onto multiple pages, i have the most basic text box i know is too long to fit on one sheet of a4 paper. when i run the print job in flash it only prints the first page. very annoying. can't find anything online to reslove the issuee is my code.
ActionScript Code:
var pageCount:Number = 0;
objPrintJob = new PrintJob();
[code]......
View 9 Replies
Nov 19, 2010
I'm trying to load a bunch of external swfs into a tile list. Once the swfs have been loaded I'm adding them to a dataprovider which I then sort and add to the tilelist. Like so:
dp.addItem({label:e.currentTarget.content.getLabel(), path:e.currentTarget.content.getPath(), source:e.currentTarget.content, cost:e.currentTarget.content.getCost(), category:e.currentTarget.content.getCategory()});
It works fine except that the way I'm doing it I have to add a bunch of functions to each swf to know which one is loaded and pass the correct info to the dataprovider.Is there another way to tell which swf has been loaded? Something like this.URLRequest. If I could tell something about it I could compare that to my original xml and find out all the other information I need for my dataprovider.
View 2 Replies
Apr 5, 2006
I've made an mc with an attached txt field offstage from which to print from. The text that populates the off stage tf is all blocky and non vector looking...so are the printed sheets. I am using both html formatting and textformat formatting on the print text. It is a dynamic text field. It has this problem with both the printed result and when i peak off stage to look at the actual fields loaded with this text. I've already tried adding dummy fields offstage with the "embed" option activated.
View 7 Replies
Jan 28, 2009
is there anyway to bypass the print dialog box while using printJob.Start() method? is there anyway to set desired value for page orientation from the script.
View 0 Replies
Jan 25, 2011
I have this script[code]...
But, here i only print an MovieClip on my Stage called papel_mc. My Question is: How i can print an external JPG??
View 1 Replies
Jul 27, 2009
So I have this flash app I'm making that uses a URL load to load a bunch of plot points from an address. When the loader finishes, it send the data to a plotter function. the plotter function clears the graphics in a shape called graphLine. It then draws a line from one plot point to another using the lineTo function. Basically every 3 seconds it makes this request and redraws the screen and updates the value of a textfield to the current y value. In flex builder 3, it works great in debug mode. The screen updates just fine. However, when I make the release build and test it out in a browser, it loads the data fine, but will not draw it until I stop the graphing process. Any thoughts on this one? Here's the code for the graphing function
[Code]...
View 2 Replies
Sep 18, 2009
I need to load a bunch of images using a for loop looping through xml. This will be called over and over for various groups of images. Memory management is a major concern. In the for loop I create a loader
ActionScript Code:
var thumb_loader:Loader = new Loader();
var thumbContainer:Sprite = new Sprite();
thumb_loader.load (new URLRequest (panelViewer [categoryPanels [indexCategoryPanels][i]].@pathName));
// set the thumb node from xml
thumb_loader.contentLoaderInfo.addEventListener(Event.INIT, thumbLoaded);
thumbContainer.addChild(thumb_loader);
I also add the thumb loader as a child now in the init handler
ActionScript Code:
function thumbLoaded(e:Event):void {
//when all thumbs are loaded I set them alpha to 0 and then to 1, for a nice effect
var thumbTarget:Object = e.target.content;
thumbTarget.alpha = 0;
Tweener.addTween(thumbTarget, { time:1, alpha:1, transition:"easeOutSine"} );
}
The issue I have I keep adding sprites and loaders and this keeps sucking resources this is for an air app that has to run for several days cycling through hundreds of images. How to keep my resources low and load a group of images delete the loaders and then on the next cycle delete the previous group.
View 5 Replies
Apr 22, 2010
Is there a timeout on the connection made by URLLoader.load? If there is, what's its value, where is it documented and can it be changed? Also, what event (if any) gets dispatched if the timeout occurs? Is there a difference between AIR and browser application in those regard?
View 2 Replies
Jan 13, 2010
here is some AS3 code I wrote to have a bunch of buttons load some MoveClips. I am using a label to tell the button where to go to play the appropriate movie clip.
It all works fine, but it seems so repetitive and I keep reading about making the code more streamline, but I am having trouble doing just that.
[Code]...
View 4 Replies
Jun 29, 2009
I am trying to load 2 arrays.the first array is a dynamic navigation menu (linkName). The second array is the corresponding title that is loaded in a dynamic textfield. For example if link1 is clicked I want the dynamic textfield to display title1 from the array if link2 is click display title2 and so on. as of right now the dynamic navigation loads fine I just cant seem to figure out a good way to do this without writing a bunch of if statements. I would like it if the programming assumed the that the length of the title array is always going to be the same length as the link array and it finds the corresponding index.
var linkName:Array=["link1","link2","link3","link4"];
var pageTitles:Array=["title1","title2","title3","title4"];
var menuHolder:Sprite = new Sprite;[code]...
View 1 Replies
Dec 17, 2009
I am trying to find an actionscript that can load an external image.
and this is what I have got[code]...
View 9 Replies
Jun 1, 2010
[code]...
it runs on local but when i upload it it doesnt loads images in browser
View 2 Replies
Sep 29, 2010
I want to make a photo uploader and after uploading the photo to the server you can load all the photo's that are in a folder in kind of a library.
I can load one single image because I name it in AS but I want to load the whole "images" folder so I can see all the pictures that are in it.[code]...
View 7 Replies
Mar 21, 2012
I cannot seem to "convert" the loadImage into a dynamic field. I am making an mp3 player and have added a cover art portion, I can only figure out how to call a single static image.However I want to to be able to call from this image from my xml file:items[currentID].artHere is the original single static image loading code.
Actionscript Code:
var tSm:String = "easeOutElastic";var tIm:Number = 2; var imageLoader:Loader; function loadImage(Iurl:String):void
[code]....
View 2 Replies
Sep 13, 2009
The script below works when I test the index.swf file in Flash as well as testing the index.html file in Dreamweaver. When I upload the HTML and SWF file to my webhost (Just Host), however, it doesn't load the images!!! Is there another line(s) of code that needs to be added or is there something wrog with the webhost? to reduce the size of my website which is my ultimate goal.
var my_loader:Loader = new Loader();my_loader.load(new URLRequest("http://www.awoodruffsart.com/img/ab2.jpg"));container1.addChild(my_loader);
View 2 Replies
Nov 3, 2010
I'm making a highscore table in flash using AS3, I have successfully got working code that displays the names and the scores but also part of my high score table it needs to display the users country flag. The images for the flags are stored on a remote server.
Now I know how to load in a single image and add it to my movie clip but things get very complicated when I want to load in 20+ by iterating through a loop. I've looked at many examples and just cant adopt the sample code to work for me. Anyway without a further a do here is what I have so far.
[Code]....
View 1 Replies
Feb 20, 2009
I keep getting a Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found. even though I have quadruple-checked my pathways.I have read through all the posts I could find but still no dice.the problem as 3 is-
var urlRequest:URLRequest = new URLRequest("general2005.xml");
var urlLoader:URLLoader = new URLLoader();
urlLoader.load(urlRequest);
[code]........
View 3 Replies
Oct 18, 2009
I am preparing a photo gallery containing over 100 HD images, and I don't want any site visitor to wait the whole gallery to load. So I made them loaded from a folder with the help of an xmlList file. With GoForward and GoBackward buttons, I made every picture to load when requested with "addChild" command after removing the previous one. But if the next image is too big the visitor still have to wait the image to load, and another problem is if the visitor makes a few forward or backward moves he/she still have to wait for the very same image to load which is shown moments ago because the image have been unloaded.
Is there a way to load all the external images into library but make them wait in the swf cache until the associated button is clicked. so this way no image will be load twice nor the visitor should have wait.
View 1 Replies
Oct 23, 2009
I am finally getting the hang of AS3, especially when I discovered how much easier it is to control information from XML.So I am creating a sort of photo album, but my problem is next button triggers the next image, but the previous image is still there. I discovered it is because I have called a load method but haven't unloaded it...
ActionScript Code:
function loadImage(url:String):void {
imageLoader = new Loader();
imageLoader.load(new URLRequest(url));
[code]....
Where P is a variable I carry to count which image to load from the xml, IMG is the variable carrying the URL from the xml file.
View 5 Replies
Mar 8, 2011
What I would like to achieve is to load an external image into a movieclip. Then load another external image to blend over it after about a 3 second delay. I would like to load approximately 8 images in total. There are no buttons at this stage which why I am really struggling.
There is probably a simple way to do this but I have started to approach by loading an image from an array into a movieclip. Save the bitmap data into a movieclip underneath. Remove the top image ready to replace. I was planning on using labels to navigate to but I can't work out how incorporate a statement to change the imported image in conjunction with the labels.
Here is the code I have used so far.
stop();
var library:Array = new Array("images/WS.jpg", "images/NY.jpg", "images/SP.jpg", "images/AQ.jpg", "images/AWI.jpg", "images/MS.jpg" );
var fileChosen = library[0]
[Code].....
View 0 Replies
Nov 20, 2011
I got 30 movieclips which i need to react like buttons for 30 external images. In a way that if i press one of buttons flash would define which one of buttons was pressed and load associated image on stage (preferably centered onstage and on some imageholder movieclip) What is the best way to do this? I guess using vars and xml path to images...But everything i was trying to make based on tutorials for image galleryes haven't worked yet. My knowing of flash syntax is really weak especially in vars and loading xml fields.
View 1 Replies
Sep 14, 2009
I am trying to write a small flash app which will load and display images provided as a query. My flash app works fine when I provide the image path directly in the browser address bar, but it is not working when I do the same using html. Here is the direct link to the flash app: [URL]
Here is the link to the html with which I am trying to invoke the app. [URL]
Here the html code snippet invoking the swf file.
Code: Select all<!-- saved from url=(0013)about:internet -->
<script language="JavaScript" type="text/javascript">
AC_FL_RunContent(
'codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash
[Code]....
I know my app is getting invoked and it appears to work fine when I hardcode the image url into the flash app. But the query method just does not seem to be working!
This is hosted on a linux site supporting php.
View 2 Replies
Feb 26, 2005
I made a swf with scrolling images but when I load the swf in the meny swf the scrolling of the images from the 2 swf is messed up.
View 1 Replies
