ActionScript 3.0 :: Use One Button To Load And Unload External Swfs?
Jun 24, 2011How can I use one Button to load and unload a sequence of external swfs, Like a Next Button and Previous Button?
View 1 Replies
Similar Posts:
ActionScript 3.0 :: Using One Button To Load And Unload External Swfs ?
Jun 24, 2011How can I use one Button to load and unload a sequence of external swfs, Like a Next Button and Previous Button?
View 5 RepliesActionScript 2.0 :: Load And Unload External Swfs?
Oct 2, 2007I have a small problem,(among many others...) i am loading an external swf using:
this.onRelease = function(){
loadMovieNum ("contentLondon.swf",50)
}
So the ext SWF loads on top of my main SWF, but i have other buttons that will load other ext SWF's. What i would like to do is when an ext SWF is loaded and the user choses to click another link from the main SWF, i would like to have the already loaded one "unload" so that the new one can load in place of it
ActionScript 3.0 :: Load / Unload External SWFs With Transitions?
Nov 3, 2009I'm trying to load & unload external SWFs with transitions in Actionscript 3.I was able to do this in AS2 on the timeline but can't figure it out in AS3. Or if I can do it with straight Actionscript.[url]...
View 0 RepliesActionScript 2.0 :: Load / Unload FLAs - External SWFs
May 12, 2008I am loading external SWFs on my main flash file. For every External SWFs: They also have multiple levels. There is a base SWF and then 5 levels of other external SWFs there. So- i load an external SWF on my main flash and that external SWF also has its own external SWFs.
[Code]....
Actionscript 3.0 :: Load Unload External SWFs Slows Down Flash Player 10?
Jul 6, 2010I have written a basic piece of code to load and unload different swfs, now on their own they're pretty smooth (opened independently) , but when you load and unload them a couple of times in the main fla, just like as a user would navigate through a website, it causes the whole flash player and the movies to slow down quite dramatically and looks very bad as if about to crash. Now i know this problem was reported in FP 9, but anyone else has encountered this in FP 10 as well ?
Here's how i load and unload the external SWFs using buttons :
Code: Select allbt1.addEventListener(MouseEvent.CLICK,onLoadClick);
function onLoadClick(evt:MouseEvent):void
{
[code]....
ActionScript 3.0 :: External Swfs Load - Remove The Swfs And Sound After A New Button Is Clicked
Nov 13, 2010I am loading eight external swfs by way of eight buttons with actionscript to remove the swfs and sound after a new button is clicked. This works fine except that as soon as you get to the frame where the actionscript is all the swfs load at one time on top of each other. I don't want any to load until the button is clicked for the right one. MouseEvent listener works but only after all the swfs have loaded. How do I get the swfs to load only when the buttons are clicked. I can't figure out what I am doing wrong.
[Code]...
Flash :: Load External Swf From A Button In It And Unload Self?
May 13, 2010I am an uber n00b to flash AS3. And it is not my intention to sound like a complete moron, but honestly, I have had a hard enough time figuring out just how to load an external .swf into my main file! add a button within the external .swf which will unload itself and load a new on in its place.
View 1 RepliesActionScript 3.0 :: SWF Unload Itself And Load A New One From Button Within External SWF?
Mar 15, 2011SWF Unload itself and load a new one from button within External SWF?
View 1 RepliesActionScript 3.0 :: Load/Unload External Swf With 1 Button
Oct 14, 2011I have a main swf (call it Main1). Main1 calls an external swf (call it swf1). Swf1 loads on top of Main1 like it should. Swf1 has a button that calls another swf on top of Main1(call this Swf2). Well the problem is, the button on Swf1 calls Swf2 on top of itself, instead of removing Swf1 first. I cannot figure this out for s*** how to make this work. How can I unloading Swf1 from the loader, and at the same time load Swf2 into the loader from a single button residing on Swf1? My code is below.
Main1 has a button (click_btn) that loads Swf1 (click_btn is in a Movie Clip, not on main timeline)
ActionScript Code:
stop();
click_btn.addEventListener(MouseEvent.MOUSE_DOWN, loadMC)
function loadMC(ev:MouseEvent){
[Code].....
How can I incorporate something like the close button (closer) into done_click to close Swf1 when I call Swf2 from this button (done_click)
ActionScript 3.0 :: Button Functions & Load In External Swfs
Jul 15, 2010im trying to load in external swfs. so as im studying, to my knowledge, ive done word for word (except file names) and it wont work heres my code, dont mind the comments....i take notes like if i was talking to myself
[Code]....
ActionScript 3.0 :: Unload Not Unloading - Unload An External SWF On _root To Load A New One Instead
Jul 23, 2009I'm trying to unload an external SWF on _root to load a new one instead. I've tried (almost) everything but can't figure it out... I get this error : "Error #1010: A term is undefined and has no properties."
[Code]....
ActionScript 2.0 :: Unload External Swfs?
Jul 18, 2004The problem is that I want to unload/remove a swf or jpg I've loaded when I press another button in the main swf. The reason why I want to do this is because if I click on a button which I've linkaged with a movieclip in the library the external swf or jpg is still visible in the background.I've tried with unloadMovieClip (transition and content) various times but it wont unload the previous loaded swf or jpg. Maybe I just can't find the correct path to where the swf or jpg loads.
View 1 RepliesActionScript 3.0 :: Load And Unload Three Swfs?
Jun 22, 2011How do I load and unload three swfs, with a button that will navigate to the next swf? Also, will the sound unload with the swf as well?
View 3 RepliesActionScript 3.0 :: Unload The Previous Loaded .swf And Load The New .swf Without Having A Separate Button To Unload
Aug 9, 2008I am working on a school project that requires me to load external .swf or .jpg files. I currently have all of the buttons working and are loading an external .swf file on to the screen. The problem I am having is that when I go from one button to the next the loaded .swf stays on the screen and the next .swf gets loaded on top of it. I know that I need to unload the file but I am not sure where to put the code for the unload or what code exactly to use. I would like when the button is pressed to unload the previous loaded .swf and load the new .swf without having a separate button to unload.
[Code]...
ActionScript 3.0 :: Load External Swfs As Pages Onto The Main Stage On The Click Of A Button
Jul 20, 2011I have created a website which loads external swfs as pages onto the main stage on the click of a button. I am using Flash CS3 and Actionscript 3.0. Here is my code:
[Code]...
ActionScript 3.0 :: Load And Unload Multiple SWFs
Oct 11, 2011I want to load and unload 4 swfs files that will run in a continuous loop. There are no buttons, it should just load automatically one after the next. The first swf plays fine but it does not advance to the next swf, it just loops the first one.
This is ActionScript Code:
// Array of external clips to use. Variable index refers to next clip to be displayed.
var clips:Array = ["swfs/ASA_Aseries.swf", "swfs/ASA_M7.swf" , "swfs/Interoperability_ASA.swf", "swfs/Vseries_ASA.swf"];
var index:int = 0;
// Stuff for loading files
var thisLoader:Loader = new Loader();
[Code] .....
ActionScript 3.0 :: Main .swf To Load And Unload Scene.swfs
Aug 11, 2009I've just recently made the leap from AS2 to AS3 and after several days of reading the CS4 help and searching posts here, I'm still at a loss how to get my first AS3 project off the ground.I'm working on an illustrated choose-your-own-path story with each step split into seperate swfs to speed up loading time.I've got a main file loading a scene swf using.[code]The loading works fine (although I've just found a post that suggests I should wait until the swf loads before adding it as a child), but how would I then get the buttons in the loaded swf to tell the main swf which swf to load next?I'm stumped firstly by that, and additionally by how I should then UNload the swfs. Is it not common practice to refer to objects by their '.name' in AS3? Should I be loading the swfs into an array?
View 1 RepliesActionScript 2.0 :: Buttons Load The External Swfs Except When Click On The Contact Button That Is In The Main Flash Page
Feb 23, 2011I am loading swfs into a movie clip. However, the contact button is not a loaded swf any longer. It's in the main flash page. This is what I want to do. All the buttons load the external swfs except when I click on the contact button that is in the main flash page. I need to get the other buttons to load after I click the contact flash button. Below is the code for the contact button and the one under for one of the other buttons.
[Code]....
IDE :: Transitions Between External SWFs / Close Button For External Swfs
Aug 15, 2005I recently created a site using the "Transitions between External SWFs" tutorial for Flash MX 2004. I use this to load the sections of my site into the main movie file. Each section is an External SWF file. When a viewer clicks on a navigation button, the specific external swf move will load and play. Currently, a viewer would need to click on another navigation option to close the current external swf file. I would like to add a close button to each of the external swfs so that a view has the option to close the window without clicking on a naviagtion link.
View 12 RepliesActionscript 3 :: Load A Local External SWF, The Application Load-unload Infinitely?
May 6, 2011I have a Flex application that just load an external SWF, but the application load and unload infinitely my swf.
[Code]...
ActionScript 3.0 :: Unloading A Loaded External SWF With A Close Button On The External SWF To Unload?
Aug 15, 2011[URL]I have: main.swf (a menu) and I have module.swf (content)If you navigate to Subsea Wellhead Systems/SS-15 BigBore II and click on that I have it load an external swf which covers most of the parent. So far so good. My problem is unloading the loaded 'Child' swf with the button provided on the loaded 'Child' swf.below is the code I used to load the file but I cant, for the life of me, find a way to unload it.
var bigboreLoader:Loader = new Loader();btnbb2.addEventListener(MouseEvent.MOUSE_UP, bigborecontent);
function bigborecontent(event:MouseEvent):void{var bigboreRequest:URLRequest = new URLRequest("moduletemplate.swf"); bigboreLoader.load(bigboreRequest); stage.addChild(bigboreLoader);
I am certain it requires the Child to communicate with the parent somehow but I am at a loss. If I could get a bit of advice or a link to something deal with this, it would be a big help. I just need to have my links load my modules and the remove them when the close buttong is hit on the loaded swf. I promise I have done searches and I admit I have found asnwers but still they are not working. I found the code below:
Main FLA:
function removeF() {
removeChild(bigboreLoader);
}
[code]....
ActionScript 3.0 :: Load External SWF And Unload External SWF
Jun 13, 2010I'm sure this question has been answered but I have been looking everywhere and all I can find is how to load an external SWF but not how to unload it. I come from a basic knowledge of AS2 and it was easy for me to load using levels but I have run into a wall. I have a main swf and to keep the initial filesize small I would like to split some image intensive sections out and load them when needed.
View 6 RepliesIDE :: Unload External Swf And Load New One?
Jul 29, 2008I'm creating my portfolio in Flash CS3. I have five buttons in website.swf. I also have five external swf files.If you click a button, it loads an external swf. If you click another button, it unloads the first swf and loads the next one. Is there anyway to unload it and load the next?
stop();
function loadMain(e:MouseEvent):void{
var loadMain:Loader = new Loader();
[code]....
ActionScript 3.0 :: Load And Unload External Swf?
Oct 7, 2009I have this simple code to play and stop external swf[code]...
View 6 RepliesActionScript 3.0 :: Load And Unload External.swf?
Oct 28, 2009OK this should be the last of the coding to complete my AS2 to AS3 conversion of a site. The AS2 site had an external photogallery .swf that loaded from a navigation button on the main timeline. It used the loadMovie function so it loaded a photogallery on top of the main .swf in level one.
I also had unloadMovie,1 in all the navigation buttons so if a user was in the gallery and they clicked anywhere else in the main .swf which is all in level 0 the gallery in level 1 would be deleted.
In this situation the gallery that will be loaded on top of the main.swf needs to be a little smaller than the main ,swf so the navigation on the top of the main shows through. If the main.swf is 900 x 600 I would need to load the photogallery on top which would be 900 x 450 and need to use x and y coordinates so when the swf loads it loads in the right spot.
ActionScript 3.0 :: Load And Unload External SWF's?
Jan 13, 2012I have a Flash project where I need to load and unload external SWF' files. I have it working, but it seems that after the second time it attempts to unload and load, it has strange results. have 4 SWF's. The Main.swf and the other external 3 that will need to load. n the main SWF I have create the loader this this code:
[Code].....
This seems to work and load the other two SWF's the second one (M-2_WIB.swf) works fine. It successfully unloads the first SWF, and loads the second. But when it get's to the third, it chokes. It does successfully load that third swf (M-3_HOACS.swf), but once it loads it seems to freeze on the first frame, and no action script continues to work. The strange thing is, if I just run the third SWF (M-3_HOACS.swf) independently, it works fine. SO there is something in the loading that is causing it to freeze. Is this a problem in the way I have the loader scripted, or maybe the way I am using addChild?
Actionscript 3.0 :: Load/Unload External Swf?
Apr 22, 2011I have been trying to put together a file that has a few buttons that when clicked begins a preloader animation (with the current swf still on stage and visiable) that once the preloader is completed it will play an exit animation of the current swf then plays the intro animation of the selected swf. An example link of exactly how im wanting the swfs/preloader to interact together is here....costumize.me...Im attaching the file I have so far.
View 1 RepliesActionScript 3.0 :: External Swfs Load In Different Places On 2nd Load
Oct 19, 2009I'm loading (and unloading) external swfs into a holder in my main document. However, they seem to load perfectly the first time, but after that, they load at a different x and y. I've seen this happen before in someone else's file, but I'm not sure what the solution is.
This is the bare bones of it:
Code:
sceneHolder.x=0;
sceneHolder.y=0;
addChild(sceneHolder);
[Code].....
ActionScript 3.0 :: Load External Swfs Which Load Videos
Apr 11, 2009Okay so I am trying to load external swfs which load videos dynamically.
I can load the swfs into the parent fla fine (if I remove all the code and just place a circle or something on the stage of the swf), and the swfs are also loading their respective videos correctly. But when I try to load the external swfs, if they contain any casting related code in them, I'm getting an error
[AS]TypeError: Error #1009: Cannot access a property or method of a null object reference.
at swf1_fla::MainTimeline/frame1()[/AS]
Is there some specific method to casting within external swfs?
My code for loading the videos is this:
[AS]var vc:NetConnection = new NetConnection();
vc.connect(null);
var vs:NetStream = new NetStream(vc);
[Code].....