I have created a website which loads external swfs as pages onto the main stage on the click of a button. I am using Flash CS3 and Actionscript 3.0. Here is my code:
[Code]...
I am loading swfs into a movie clip. However, the contact button is not a loaded swf any longer. It's in the main flash page. This is what I want to do. All the buttons load the external swfs except when I click on the contact button that is in the main flash page. I need to get the other buttons to load after I click the contact flash button. Below is the code for the contact button and the one under for one of the other buttons.
[Code]....
figure this out I am using this code inside my nav movieclip to load external movie clips on the main stage
Code:
var Xpos:Number = 110;
var Ypos:Number = 180;
[code].......
I am loading eight external swfs by way of eight buttons with actionscript to remove the swfs and sound after a new button is clicked. This works fine except that as soon as you get to the frame where the actionscript is all the swfs load at one time on top of each other. I don't want any to load until the button is clicked for the right one. MouseEvent listener works but only after all the swfs have loaded. How do I get the swfs to load only when the buttons are clicked. I can't figure out what I am doing wrong.
[Code]...
My external swfs are taking 8-10 secs gap in loading inside main swf, that's why i want to load my external swfs with dynamic content at the same time when my main swf loads.
Code of preloader
Code on 1st frame:
onClipEvent (load) {
total = _root.getBytesTotal();
}
[Code].....
The problem is this: I am loading 4 external SWFs into an empty MC on the main stage for each of the 4 projects.So you press a button on the main stage for a project, and it loads that specific SWF.These SWFs contain an opening text for each project, a button to "continue" to the gallery, then the text fades out and the gallery loads.That's all within the SWF itself.The SWFs work fine on their own, but the problem is that when I load the SWFs into the empty MC on the main stage, the "continue" button doesn't work correctly The SWFs load fine, it's just the button At first when I pressed the button it would send my main stage back to the first frame, so I thought it was because the AS for the button in the SWF was probably conflicting with the main stage and confusing it. I went back into the SWFs and tagged part of the SWF timeline with the name "togallery" so that when you click the "continue" button, in theory, Flash knows specifically where to go within the timeline of the SWF and not the timeline of the main stage.
That hasn't worked either. The button just doesn't work at all now, at least not when the SWF has been loaded onto the main stage. Again, it works fine on its own. So what can I do? How can I get a button within an external SWF to reference only it's own timeline and not that of the main stage?
im using a load targetscript to load external swfs into the main timeline of my movie, however im keeping much of the other layers/mc's loaded, and the external swf is loading over them, the level the blank movie clip is created in doesnt seem to be working propperlly?? whats going wrong?
bandb.onPress = function() {
_root.createEmptyMovieClip("empty2", 4);
loadMovie("flash/band.swf", "_root.empty2");
container._x = 0;
[Code]...
im using a load targetscript to load external swfs into the main timeline of my movie, however im keeping much of the other layers/mc's loaded, and the external swf is loading over them, the level the blank movie clip is created in doesnt seem to be working propperlly?? whats going wrong?
[Code]...
This function loads external swfs movieclips from a folder named "swfs" using the buttons istance names How can I change it so it will load the swfs placed on the same folder as the main swf?
Code:
function btnClick(event:MouseEvent):void{
removeChild(loader);
var newSWFRequest:URLRequest = new URLRequest("swfs/" + event.target.name + ".swf");
loader.load(newSWFRequest);
[code]....
I'm working on a portfolio site that loads external images and swfs (using loadClip). Many of the swfs are banners that have stuff that's viewable off the stage...whoever developed them wasn't smart enough to mask it off, and I don't have the source files.
The first problem I have is the extra stuff is showing up when i load it. The second is that its messing up the width and height properties of the clip (which I need to use to resize a frame that fits around the loaded swf/image). Is there anyway to get the size that the swf document was actually set to with actionscript? That way I can set up a mask. Otherwise I think I'd have to manually create an fla with a mask and correct size for each existing swf that externally loads that swf. Unless anyone can think of a better solution?
I need to click on a button that is on an external swf loaded in the main movie with a loader. I'm trying this but does not work:
// main movie
function openswf(queFoto:String)
{
imgLoader = new Loader();
[Code].....
I have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf
View 3 RepliesI am trying to get a nav button in one movie (main_nav.swf) to target a my main movie (index.swf) and load a sub nav movie (metals_subnav_infinite.swf) into it. The sub nav movie will do a similar task - loading a portfolio swf into main movie (index.swf). Here is the file breakdown of my working files:index.swf - main final movie which loads "main_nav_infinite3.swf" on startmain_nav_infinite3.swf - loads main nav "main_nav.swf" and scrolls it infinitely (infinite menu)main_nav.swf - main nav with buttons that trigger sub nav "metals_subnav_infinite.swf" to load into index.swfmetals_subnav_infinite.swf - loads sub nav "metals_subnav.swf" and scrolls it infinitelymetals_subnav.swf - sub nav with buttons that trigger "folio.swf" (have not created this file yet!) to load into "index.swf"The script I was focusing on is in main_nav.fla and it is:
metals_mc_bn.onRelease = function() {
reActivateMenu();
this.gotoAndStop(3);
[code].....
How can I use one Button to load and unload a sequence of external swfs, Like a Next Button and Previous Button?
View 1 RepliesHow can I use one Button to load and unload a sequence of external swfs, Like a Next Button and Previous Button?
View 5 Repliesim trying to load in external swfs. so as im studying, to my knowledge, ive done word for word (except file names) and it wont work heres my code, dont mind the comments....i take notes like if i was talking to myself
[Code]....
All works fine untill I do something to the loaded swf.For example if I click a button on the loaded swf the button works but then when I click the button on the main movie to load the next and play the transition the transistion doesnt work.If I dont do anything to the loaded swf the transitions work.Is it something to do with the paths being changed when the loaded swf is acivated?
View 2 Repliesi found a script that unloads my external swf inside a movieclip when i click a button on my main screen. this script causes the external flash inside my moviclip to close and unload when i click the close button, which is what i want!. the only pain in the butt is it preloads the external flash when you go the flash site and i dont want that. i only want the script to close the external swf. if anyone is curious book.swf is the swf in the movieclip i am trying to close.[code]
View 1 RepliesI am trying to get an instance of a class to the load an external swf and show it.So far I have the following:
1) I wrote a class that uses the Loader class to load an external swf "loadExtSWF".
2) I have a fla named "MainSWF.fla" that uses a document class "MainSWF.as".
3) I have the MainSWF.as file that instances "loadExtSWF" and calls loadExtSWF.startLoad to load the swf.
This almost works. The instance of loadExtSWF loads the external swf, but the swf is not displayed.If I replace the fla's document class with loadExtSWF (this has an empty constructor) instead of MainSWF, and run loadExtSWF.startLoad, then the external swf is loaded and displayed.[code]
Im trying to load a movie using a button. I just want the button, when hit, to load an external .swf file inside the movie clip playing.
In AS1, (I never did learn AS2) this is what the button command said
on (release) {
loadMovieNum(�About.swf�, 0);
}
So how would this translate into AS3?
I'm creating a site that loads external .swfs as pages. I have little understanding of how Loaders and instance names work with AS3 (even after reading the documentation), so I'm having some difficulties.
I'm loading the .swfs in a movie clip named "container." I want to replace the contents of "container" with the web page .swf that the user chooses, but I don't know how to write the condition to:
a) check to see if something is already inside "container"b) remove the contents by instance name or method of MovieClip. I'd prefer to remove whatever is inside of "container" rather than switching cases for different instances.
[Code]...
I'm trying to implement swf address with my website that uses external swfs as the 'pages'.
[URL]
But I haven't been able to find an example file with example code that I can ferret out how to apply this to my website. I've also checked the swfaddress and while there is a link to this:[URL].Also... is it unwise to retroactively work in swfaddress to an already compiled as or should i be starting fresh, knowing that I am going to give unique urls to various buttons, that when clicked, bring up a certain 'page' or external swf?
I am building a flash site and I am trying to load all of my swf file into one (final) fla file. This is the code for loading one of them in:
// ActionScript 3.0
stop();
var movie1:URLRequest = new URLRequest("mainpage.swf");
var ldr:Loader = new Loader()
ldr.load(movie1);
addChild(ldr);
So this mainpage.swf file has a button with instance name of btnContact which I would like to add an event Listerner to it here in the (final fla) so when I click it, it jumps to the frame "one" on the final timeframe.
So basically, controling the main timeframe though using a button on an external swf file.
Trying to remove mc from stage when click to other pages. [code]...
how do i make the images_banner.swf go away when you leave the index page and NOT return as you move to the other pages?
I have 2 buttons on the stage whose each MouseEvent load a different external swf when clicked. In an attempt to get the current swf to fade out and new swf to fade in on button click, I vainly added a Tween to the function but to no avail.
As it is now, when the movie starts, the button 1 swf fades in, however, when button 2 is clicked, the new swf is loaded but the old swf does not fade.
Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
var image:Loader = new Loader();
[Code]....
How to load an External SWF on button click?[code]...
View 3 RepliesUsing AS3.0, how do I load an external swf file when I click a button? Also, how can I get rid of that swf file when I click a different button on a menu?
View 1 RepliesI can load an external SWF when I click a button. If I click the same button again the same swf file loads on top of it self. How can I fix it?
[Code]....
I am trying to simply load in an external swf when I click a button. I have created a button on the stage called it 'my_button' I can get the swf to load in automatically but I am not understanding the script for loading it in on a click.....would someone pleae explain what script I need to have this is the script I have for loading automatically
[Code]...
I was getting in to transitioning from AS2 to AS3 a while back and had designed a page that had menu buttons that when clicked, loaded an external swf in to a container. Pretty simple accept for the fact that it was a while ago and my computer crashed so I'm having to redo this and learn it all over again. I have read in to flash on the subject but I am not to sure on the best way to go about this. I know there are a lot of people on here who make thing a lot more simple and structured than I do. I'm so used to putting the actionscript on the button and I'm a little stuck on the best way to combine the actionscript for the button and loading the swf. I would need to make a button load an external swf in to a container when clicked? I figure I just need one and then I can copy it to all the other menu buttons.
View 2 Replies
