ActionScript 3.0 :: Implement Swf Address With Website That Uses External Swfs As The 'pages'?
Jul 18, 2011
I'm trying to implement swf address with my website that uses external swfs as the 'pages'.
[URL]
But I haven't been able to find an example file with example code that I can ferret out how to apply this to my website. I've also checked the swfaddress and while there is a link to this:[URL].Also... is it unwise to retroactively work in swfaddress to an already compiled as or should i be starting fresh, knowing that I am going to give unique urls to various buttons, that when clicked, bring up a certain 'page' or external swf?
View 8 Replies
Similar Posts:
Jan 28, 2009
I'm creating a site that loads external .swfs as pages. I have little understanding of how Loaders and instance names work with AS3 (even after reading the documentation), so I'm having some difficulties.
I'm loading the .swfs in a movie clip named "container." I want to replace the contents of "container" with the web page .swf that the user chooses, but I don't know how to write the condition to:
a) check to see if something is already inside "container"b) remove the contents by instance name or method of MovieClip. I'd prefer to remove whatever is inside of "container" rather than switching cases for different instances.
[Code]...
View 3 Replies
Jul 20, 2011
I have created a website which loads external swfs as pages onto the main stage on the click of a button. I am using Flash CS3 and Actionscript 3.0. Here is my code:
[Code]...
View 6 Replies
Feb 26, 2012
- I made a flash-based website using Flash CS3 and then embedded the file into a blank html page with Dreamweaver cs3.-All my buttons, linking, and content were made in Adobe Flash CS3 using ActionScript 2.0 (AS2).The issue I am encountering is that when i click on some buttons that have get URL codes, they will not load the html files assigned to the As2 code of the button. The html files are supposed to load in a separate browser window for each html page assigned to each button. The html files are located within subfolders in my Main Site Root Folder.All my AS2 code is Object-based; meaning I applied it directly to my button symbols.
View 4 Replies
Feb 26, 2012
I made a flash-based website using Flash CS3 and then embedded the file into a blank html page with Dreamweaver cs3. All my buttons, linking, and content were made in Adobe Flash CS3 using ActionScript 2.0 (AS2). The issue I am encountering is that when I click on some buttons that have get URL codes, they will not load the html files assigned to the As2 code of the button. The html files are supposed to load in a separate browser window for each html page assigned to each button. The html files are located within subfolders in my Main Site Root Folder. All my AS2 code is Object-based; meaning I applied it directly to my button symbols.
View 2 Replies
Jul 14, 2009
how to get your logo to appear next to the address of your web site when your website address is typed in,
for example if you look at the website address at the top of the screen you see (logo) [URL]
View 1 Replies
Oct 26, 2004
I want one animation of a content area but i want the menu to run the animation and put in a certain .swf so i can have something like:when u click a button that is suposed to goto Home then it plays a MC that has Home as an external .swf loaded into it and when i click another link like Portfolio it starts that MC over but with Portfolio as an external .swf in it
View 1 Replies
Oct 29, 2009
I'm trying to set up a website that uses the MovieClipLoader class to load external images & swfs. The loader is working but I can't seem to get the preloader text to work, ie the onLoadProgress. The Percent text just has jibberish when I test the movie. Could some tell me what I'm doing wrong. Attached is the test file that I'm working on
[Code]...
View 3 Replies
Sep 2, 2006
[URL]regarding this tutorial I started my site [URL] to get some trasition effects but im getting somewhat different since the external SWFs take time to load. isn't it better to create "intro and outro" on the same time line instead of loading external SWFs bcos once the movie loaded as a whole will lead to smooth and contineous transitions.
View 1 Replies
Jan 12, 2011
How do I get the IP address of a certain website using Flex 4 via an AIR application? I know that this is do-able using ping but how can I replicate the same only this time, using AS3 in Flex 4 and as an AIR application.
View 1 Replies
Feb 11, 2010
I am a c# asp.net developer and need to implement a number of flash website banners. Previously for static image banners I have implemented on_click code behind or javascript to log the banner has been clicked back to a database and process the re-direction. I don't have much knowledge of flash other than I know that a flash program can handle on-click events of the program. Therefore, can somebody suggest the best solution for capturing and processing on-click events of a flash object on a webpage.
View 2 Replies
Sep 19, 2009
I'd like to know can I make my flash be affected when browsers address bar changes.Sample: [url]....What do I need: flash website with subpages.I want it to call a function to change visible page into one put in the address bar, like: I click a "info" button in flash
flash shows info page and changes address bar in browser to http:[url]...info and vice versa: I put http:[url]...info into address bar flash changes it's subpage to info.I want it to be one flash file as index.php page without any reloadings, just like in[url].....
View 2 Replies
Aug 15, 2005
I recently created a site using the "Transitions between External SWFs" tutorial for Flash MX 2004. I use this to load the sections of my site into the main movie file. Each section is an External SWF file. When a viewer clicks on a navigation button, the specific external swf move will load and play. Currently, a viewer would need to click on another navigation option to close the current external swf file. I would like to add a close button to each of the external swfs so that a view has the option to close the window without clicking on a naviagtion link.
View 12 Replies
Oct 19, 2010
Im trying to make a website using swfaddress, and i cant figure out how to do the dynamics with arrays, rather then putting the motion tweening in the frames. What i got so far: everything is working as long as you use the buttons on the page, each button in the menu makes the previous page go away and brings up a new page according to the button pressed (its just white square, that comes from the bottom of the screen) dynamically.
Buttons and pages are located in the first frame, then i ve got keyframes: about, gallery, etc. The problem comes up when i upload it in the internet, and i try to use the back and forward buttons in the browser, my white square windows (pages) are only capable of moving out of the page, but a new white square doesnt come up.
View 1 Replies
Jan 20, 2010
I'm looking into implementing the flash player detection kit onto our website. I found a good resource about this but had a question: [URL]. It looks like the flash player detection kit is focused on flash player 8. Are there any differences as to how to handle this situation for flash player 9 or 10, or will the kit work for all? Please note that I am not a flash developer, but am doing research to advise our IT folks as to how we should go about setting up proper flash detection on our site.
View 1 Replies
May 23, 2010
I am fairly new to flash and I have started to attempt to modify a template that I found online to make it my own. The thing that I am having problems with is the URL Links. There are 5 different clickable tabs on the header that I have, and when you edit it in flash cs4, each one is the same image when you edit it. The only way in which you can change what each one of them says is by editing them in the library. This isn't the problem. I want to link these tabs to different pages on my website. When I edit one of them, all of them change to the same url link. The file is too large for me to upload I think.
View 4 Replies
Aug 6, 2009
I was wondering if there is an easy way of navigating through a website without the use of multiple pages and eliminate the use of a navigation bar. My idea, which I'm sure has been done before because people are always coming up with new inventive ways to browse the internet, is to be able to allow the user to free roam the entire website on one page. I wouldn't be asking if I found it so I figured I could put my mind at ease and ask someone.url...In this map, it allows the user to free roam this map and find different cities. My idea is to have the user to browse a map of a website to different parts of what would normally be links to other pages. The whole web map would be one page and the user could just move their cursor up or down or left to right to each section of the website. Once they get to a section, they can click on certain parts. There is one website that is similar to my idea, but I want to eliminate the use of a navigation bar.I am new to flash but I love web design. I want to come up with a new way to navigate.
View 5 Replies
Nov 28, 2010
The pages get scrambled once I publish and test it for instance the one page shows and then the next and then another - all after another in rapid succession.I have the following layers:
1. Background - 20 (Where layer stops)2. Template - 20 (home) 3. Buttons 20 (the "20" layers will eventually change once the site grows bigger)4. page two- 25. page thee - 11 (has 9 pages on its own)6. page four - 12 now, the pages only jump around ONCE I ADD PAGE 4 - which is a movie.The movie is an .SWF and works fine on its own. The movieload tutorial is correct and works. There are also buttons on page 4 with button commands - I removed them and tested the published website without the buttons but they continue to jump around.
View 6 Replies
Jul 11, 2009
I designed a flash banner with buttons. I am trying to get those buttons linked to other pages in my website. I have tried several methods but none appear to work. The first thing I tried to was to assign the buttons to my other webpages through using the behaviours under the windows tab in Flash CS4. It worked when using the publish preview option (preview in flash) and choosing Flash, but when I went to add the banner to my webpage through Dreamweaver, the buttons would not work. I tried another method and used actionscript 3.0. I kept getting errors.
[Code]....
View 30 Replies
Nov 7, 2009
I created a very simple website with the flash export capability of Adobe Encore. To my disappointment there is a noticeable black flash between the different pages which makes the project basically useless. What is causing the black frame and is there a way to fix it? I have included all the files involved as an attachement so you can take a look at the code if you want!
View 2 Replies
Mar 3, 2009
I am new to Actionscript and am working with AS3 in Flash CS3 to produce a portfolio website. Basically I have my flash set up with a 3x3 grid (9 boxes about 450px by 450px each box) and each box will have info and basically be a page that will be displayed in the masked area I have made. I have already got the navigation working but I want to make it tween to each page with a deceleration effect. The following is my code for my navigation which currently works fine:
Code:
stop();
function goTopRight (e:MouseEvent):void{
[code]....
View 5 Replies
Jul 9, 2009
I've got an SWF that'll be viewed via a webpage, that loads a choice of 7 different web pages/SWFs depending on buttons clicked.The problem is these files are quite big and take a good few seconds to load each, so for each SWF, I created a progress bar on frame 1, that then loads frame 2 (where all the code and content is) once it's ready. The code I used is as follows:[code]The problem is as you can see from is that it takes ages to load the loader! So I end up with a blankurl... screen then the loading bar, then the content. Making the loading screen pretty useless!
View 2 Replies
Sep 11, 2009
I have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf
View 3 Replies
Nov 13, 2010
I am loading eight external swfs by way of eight buttons with actionscript to remove the swfs and sound after a new button is clicked. This works fine except that as soon as you get to the frame where the actionscript is all the swfs load at one time on top of each other. I don't want any to load until the button is clicked for the right one. MouseEvent listener works but only after all the swfs have loaded. How do I get the swfs to load only when the buttons are clicked. I can't figure out what I am doing wrong.
[Code]...
View 5 Replies
Jan 12, 2009
I am about to design my first Flash website which uses pages of different heights. I want the entire window to be Flash. There will be a background pattern, and the website design will be centered horizontally, with just the height changing depending on which page I'm on. Some pages will require scrolling and other pages will not. If possible, I'd like to use the browsers built-in scroll bar. A few months ago, I would have thought this was impossible to do in Flash, but I actually have seen a website which does exactly this. It's a shame I can't remember the URL. Any suggestions on how I might go about achieving this task? The only way I can imagine is to split up all the pages on separate URL's, but then I won't be able to do smooth transitions between pages.
View 1 Replies
May 7, 2009
I am about to design my first Flash website which uses pages of different heights. I want the entire window to be Flash. There will be a background pattern, and the website design will be centered horizontally, with just the height changing depending on which page I'm on. Some pages will require scrolling and other pages will not. If possible, I'd like to use the browsers built-in scroll bar. A few months ago, I would have thought this was impossible to do in Flash, but I actually have seen a website which does exactly this. It's a shame I can't remember the URL. Any suggestions on how I might go about achieving this task? The only way I can imagine is to split up all the pages on separate URL's, but then I won't be able to do smooth transitions between pages.
View 3 Replies
Sep 30, 2011
I have created a flash website in cs4 using AS2. I have 2 layers in my time line, content and AS. I created scenes along the time line and labeled each scene "about" "contact" etc.Each scene is 10 frames long and has the stop action applied to it. The gotoAndPlay command is applied to each button within the scene and I have used the folowing action on the buttons to link the pages:on (release) {gotoAndPlay("scenename");}This does link the pages however if i hit any of the buttons twice, it directs me to the wrong page. For example if I hit the home button twice, it will direct me to the about page. Should I be targeting a frame within the scene also?
View 3 Replies
Jul 29, 2011
I'm building a site in flash using as3. I implemented an xml slideshow on the home page but it wont disappear when changing pages. Anyone could tell me how to remove it on other pages?
[Code]...
View 2 Replies
Oct 10, 2009
I'm trying to create a website that is basically a flash toolbar that directs the user to different HTML pages at the bottom, much like this website here.
[URL]
Do I build the bar in Flash and then the HTML portion in dreamweaver or do I build it all in Flash? Would an iFrame work for this sort of website?
View 1 Replies
Sep 28, 2010
I have a custom form that I want to implement and I am having a problem figuring out how to do so. I want to have it work like an inner popup where it blurs and unblurs the background image (like the schedule from hbo.com).[code]...
Lets say I load a section called home.swf into the section loader. Within the home.swf I have a button for someone to call up the form.swf. Is it possible for the form to blur the random background image when loaded then unblur it when it's done?
View 0 Replies
