ActionScript 3.0 :: Website Nav, Tween Between Pages In The Same Scene?
Mar 3, 2009
I am new to Actionscript and am working with AS3 in Flash CS3 to produce a portfolio website. Basically I have my flash set up with a 3x3 grid (9 boxes about 450px by 450px each box) and each box will have info and basically be a page that will be displayed in the masked area I have made. I have already got the navigation working but I want to make it tween to each page with a deceleration effect. The following is my code for my navigation which currently works fine:
Code:
stop();
function goTopRight (e:MouseEvent):void{
I will have three seperate pages for the motion tween, mask effect and shape tween... would you make the seperately, in a different scene, as a symbol or on the same scene with the website.
I've in my flash scene main page and sub pages scattered in different ereas at the scene, but the scene start from main page and that what will show only, now if I clicked any link the scene carry us to the link page in the same scene, and from that page I can press any other link to start moving over the scene to different pages.
I am fairly new to flash and I have started to attempt to modify a template that I found online to make it my own. The thing that I am having problems with is the URL Links. There are 5 different clickable tabs on the header that I have, and when you edit it in flash cs4, each one is the same image when you edit it. The only way in which you can change what each one of them says is by editing them in the library. This isn't the problem. I want to link these tabs to different pages on my website. When I edit one of them, all of them change to the same url link. The file is too large for me to upload I think.
I was wondering if there is an easy way of navigating through a website without the use of multiple pages and eliminate the use of a navigation bar. My idea, which I'm sure has been done before because people are always coming up with new inventive ways to browse the internet, is to be able to allow the user to free roam the entire website on one page. I wouldn't be asking if I found it so I figured I could put my mind at ease and ask someone.url...In this map, it allows the user to free roam this map and find different cities. My idea is to have the user to browse a map of a website to different parts of what would normally be links to other pages. The whole web map would be one page and the user could just move their cursor up or down or left to right to each section of the website. Once they get to a section, they can click on certain parts. There is one website that is similar to my idea, but I want to eliminate the use of a navigation bar.I am new to flash but I love web design. I want to come up with a new way to navigate.
The pages get scrambled once I publish and test it for instance the one page shows and then the next and then another - all after another in rapid succession.I have the following layers:
1. Background - 20 (Where layer stops)2. Template - 20 (home) 3. Buttons 20 (the "20" layers will eventually change once the site grows bigger)4. page two- 25. page thee - 11 (has 9 pages on its own)6. page four - 12 now, the pages only jump around ONCE I ADD PAGE 4 - which is a movie.The movie is an .SWF and works fine on its own. The movieload tutorial is correct and works. There are also buttons on page 4 with button commands - I removed them and tested the published website without the buttons but they continue to jump around.
I designed a flash banner with buttons. I am trying to get those buttons linked to other pages in my website. I have tried several methods but none appear to work. The first thing I tried to was to assign the buttons to my other webpages through using the behaviours under the windows tab in Flash CS4. It worked when using the publish preview option (preview in flash) and choosing Flash, but when I went to add the banner to my webpage through Dreamweaver, the buttons would not work. I tried another method and used actionscript 3.0. I kept getting errors.
I created a very simple website with the flash export capability of Adobe Encore. To my disappointment there is a noticeable black flash between the different pages which makes the project basically useless. What is causing the black frame and is there a way to fix it? I have included all the files involved as an attachement so you can take a look at the code if you want!
I am about to design my first Flash website which uses pages of different heights. I want the entire window to be Flash. There will be a background pattern, and the website design will be centered horizontally, with just the height changing depending on which page I'm on. Some pages will require scrolling and other pages will not. If possible, I'd like to use the browsers built-in scroll bar. A few months ago, I would have thought this was impossible to do in Flash, but I actually have seen a website which does exactly this. It's a shame I can't remember the URL. Any suggestions on how I might go about achieving this task? The only way I can imagine is to split up all the pages on separate URL's, but then I won't be able to do smooth transitions between pages.
I am about to design my first Flash website which uses pages of different heights. I want the entire window to be Flash. There will be a background pattern, and the website design will be centered horizontally, with just the height changing depending on which page I'm on. Some pages will require scrolling and other pages will not. If possible, I'd like to use the browsers built-in scroll bar. A few months ago, I would have thought this was impossible to do in Flash, but I actually have seen a website which does exactly this. It's a shame I can't remember the URL. Any suggestions on how I might go about achieving this task? The only way I can imagine is to split up all the pages on separate URL's, but then I won't be able to do smooth transitions between pages.
I have 2 websites both built entirely in flash.My problem is that I have created a button on 1 of the sites that has to link to a particular scene and frame within a different flash website.
I have created a flash website in cs4 using AS2. I have 2 layers in my time line, content and AS. I created scenes along the time line and labeled each scene "about" "contact" etc.Each scene is 10 frames long and has the stop action applied to it. The gotoAndPlay command is applied to each button within the scene and I have used the folowing action on the buttons to link the pages:on (release) {gotoAndPlay("scenename");}This does link the pages however if i hit any of the buttons twice, it directs me to the wrong page. For example if I hit the home button twice, it will direct me to the about page. Should I be targeting a frame within the scene also?
I'm trying to implement swf address with my website that uses external swfs as the 'pages'.
[URL]
But I haven't been able to find an example file with example code that I can ferret out how to apply this to my website. I've also checked the swfaddress and while there is a link to this:[URL].Also... is it unwise to retroactively work in swfaddress to an already compiled as or should i be starting fresh, knowing that I am going to give unique urls to various buttons, that when clicked, bring up a certain 'page' or external swf?
- I made a flash-based website using Flash CS3 and then embedded the file into a blank html page with Dreamweaver cs3.-All my buttons, linking, and content were made in Adobe Flash CS3 using ActionScript 2.0 (AS2).The issue I am encountering is that when i click on some buttons that have get URL codes, they will not load the html files assigned to the As2 code of the button. The html files are supposed to load in a separate browser window for each html page assigned to each button. The html files are located within subfolders in my Main Site Root Folder.All my AS2 code is Object-based; meaning I applied it directly to my button symbols.
I made a flash-based website using Flash CS3 and then embedded the file into a blank html page with Dreamweaver cs3. All my buttons, linking, and content were made in Adobe Flash CS3 using ActionScript 2.0 (AS2). The issue I am encountering is that when I click on some buttons that have get URL codes, they will not load the html files assigned to the As2 code of the button. The html files are supposed to load in a separate browser window for each html page assigned to each button. The html files are located within subfolders in my Main Site Root Folder. All my AS2 code is Object-based; meaning I applied it directly to my button symbols.
I'm building a site in flash using as3. I implemented an xml slideshow on the home page but it wont disappear when changing pages. Anyone could tell me how to remove it on other pages?
I'm trying to create a website that is basically a flash toolbar that directs the user to different HTML pages at the bottom, much like this website here.
[URL]
Do I build the bar in Flash and then the HTML portion in dreamweaver or do I build it all in Flash? Would an iFrame work for this sort of website?
I made a short movie at the beginning of my project and afterwards I made a symbol-movie clip with many motion tweens (at the end of the symbol animation I put stop(); ). Now I have a problem - how should I insert my symbol-movie clip after my first short movie? To one frame or to more ones? I have tried some ways but I have not found the solution - the symbol-movie clip is not ruuning in my main scene.
I am using a set of 4 images. It works fine but now I need to put it in a website that is being created from a template. I know it may not work with the template but I don't even know how to begin to get it from Flash.
I have spent many hours trying to nut this one out.. I have an animated button which I am animating using a tween class. It works fine, my problem is this, I need to jump to another Scene after the animation has finished.
I am using some tutorial from lynda for making tween animation for my inspiration on making web site in CS4 but in my 2-3 project I have same problem. Sometimes my tween crash in middle of animation? Is this beacouse I have to much code in timeline?
i bought a dvd "Learn Flash" it shows how to animate buttons and such but doesn't show how to make buttons load pageHome!? What do i need to do to make this work?
Here is my code:
var homePageageHome = new pageHome(); var videoPageageVideo = new pageVideo(); var webPageageWeb = new pageWeb();
ive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
Looking for a tutorial to make individual pages (jpg or gif) into swf pages so we can add links in an on-line flip book. I have flash, but have not learned as of yet.
I would like to know how to track my pages with google analytics to see which pages are getting the most clicks. My site is XML / Flash the menu is xml. Could I put the tracking code on each of the menu items in the xml file?
I'm trying out a page-flip program that tells me to create the pages as jpegs within a folder named "pages" in the Library. When I try to run it, it tells me it can't find the jpegs. I can get it to work locally by including the full URL (i.e., "...My Documentsedinnerpartiesimagesp3-large.jpg), but I know this isn't embedded in the swf file.
I have created a website with one flash animation banner.The banner .swf has 5 menus. Each menu goes to different movieclips inside the .swf file. and at the same time i want to load the corresponding html file when i click the menu button and place the html content into the bottom area of the main html page without refreshing the html page.
