ActionScript 3.0 :: Why Does SWF Play Back At High Speed Every Other Repetition
Nov 28, 2009
I've got a short SWF around 150 frames long, the first 49 frames consist of a movie clip that contains an embedded FLV movie (created in after effects), the remaining frames consist of a few basic motion tweened graphic elements over a total of 4 layers and the file has no action script. The problem is that when I export the movie every other time the file loops the latter 101 frames after the FLV play back at high speed.
The first 49 frames always play back normally, but then 1st time the remaining frames play high speed, then 2nd time normal speed, 3rd time high speed then normal etc etc. The project is set to 12fps and the embedded FLV is also 12fps. The file shows no errors. Can someone explain what is going on here? I have never come across this problem before, but then I've never used an embedded FLV before, I suspect this is what's causing the problem but I can't figure out why, especially as the file plays back as it should every other time.
View 0 Replies
Similar Posts:
Oct 12, 2011
I need to play an flv back at normal speed,back at half of normal speed, forward at half of normal speed in AS3 through netconnection and netstream.
View 1 Replies
Jun 6, 2011
I'm trying to time things in flash and need a high-speed timer with resolution of somewhere around 10 to 100 microseconds. the closest thing i have found so far is the "time" component of Date. that has a resolution of about 16 milliseconds and therefore is too coarse for what i need.
View 3 Replies
Jan 2, 2010
I'm working on a Curling game and have a broom moving back and forth based on the mouseX position. Although I thought it would be as simple as recording the current broom position vs. the previous broom position that's not the case. This is because when you move back and forth the current and last postion may be at the very same point, like the center of the screen, depending on when exactly the mouse position is recorded. So, moving the mouse very slowly may give the same result and moving the mouse super fast where the x coordinate just happens to be recorded at or near the same point.
I tried using both an enterFrame event and a timer. Both yielded essentially the same results. I can't think of a way around this off the top of my head. Is there another way to record how fast the user is moving the mouse back and forth?
View 2 Replies
Oct 11, 2003
how can i make a high score table for a flash game where EVERYONE see's the same high scores?
eg.
Bill gets 1000 in USA
Ben gets 1002 in UK
they can see each others scores on a high score table.
View 7 Replies
Jan 10, 2009
generating random numbers between 50 and 200 but the number that has been generated once should not be displayed again. I am using this code
var num:Number;
on(release){
num = Math.round (Math.random ()*200);
trace(num+50); // +50 because random numbers between 50 and 200 are required
}
Its working fine but sometimes repeat the number that has already been displayed.
View 4 Replies
Mar 27, 2012
I have a spot a difference game that every time I solve an image, and I click next it will load another MC from library.
Below is my code to randomly loaded the MC from library:
var showMcNum:Number = 0;
var movieList:Array = [mc1,mc2,mc3];
function getRandomMovie():MovieClip
[Code].....
I would like to every time I click the next button, then it will load another MC from library without repeatation of those MC.
View 2 Replies
Mar 11, 2010
I'm working on animating typography in Flash. In the working flash document everything is playing back OK.
When I publish the movie and play the SWF file the playback is not at a consistant speed throughout.
Sections of the animation that have content on multiple layers slows down the rate of playback. Sections of the animation that on have content on 1 layer seem to make the playback much faster. So that elements that are moving in consistant speeds inside the flash document are not moving at constant speeds in the SWF file.
What can I do so that the published movie plays at a consistent speed?
View 1 Replies
Dec 11, 2010
Is there a way to change the speed of audio/video playing in VideoPlayer or any other such control?Let's say to play voice recordings of slow speaking persons faster to save time.Some mp3 players (e.g. COWON S9) can keep the pitch to avoid funny voice.
View 1 Replies
Mar 10, 2011
I'm trying to play through a MovieClip frame by frame using setInterval. Overall I'm trying to imitate speeding up and slowing down of the MovieClip by changing the setInterval time. Basically, when a user moves the Slider the MovieClip needs to speed up or slow down based on the Slider value. EDIT: The code above works to a certain extent. As in the slider updates updateClip() and the MovieClip does actually play at one speed. But the MovieClip does not play at the speed variable value. If I remove the ClearInterval() the MovieClip just plays at one speed but then doubles when the Slider is changed. What I'm looking for is the MovieClip to play at the same rate as speed value.
[Code]...
View 4 Replies
Dec 7, 2005
can i adjust the speed of play of a timeline. For instance when a button is clicked i want the timeline to speed up to a certain point and stop. Not to play at the normal speed?
?#2
i have the following code
Code:
mousex = _root._xmouse;
[Code]....
this works fine, however if i load a movie clip on top of this one the _hits are still active..when the loaded movie clip is unloaded, the movie behind has moved based on cursor movement. how do i deactvate the _hits on command?
View 3 Replies
May 7, 2010
Is there any way I can create a slider on my desktop to access some of the controls of the YouTube Video player like volume, pause, play, playback speed? I know it is a flash player, but would this involve accessing the YouTube API or something else? For example, I'd like to program something similar to what's provided by the Enounce MySpeed application (control over play back speed).
View 1 Replies
Jul 1, 2009
I'm using Flash CS3 and AC2... I have a button on my main TL and I want to go back a few frames and play a MC at a specific frame when hit.
View 3 Replies
Sep 4, 2010
Stop a sound then play another then back to it ?look at the Attachments files
View 2 Replies
Dec 21, 2010
i created with a flash rotating banner. Banner works fine on all computers but won't play on iphone. I'm aware that there are limitations at this point with flash and iphones. How are webdesigners creating rotating banners and the like that play on iphones? Can this be done in flash cs3?
View 11 Replies
Nov 14, 2011
I have an IP camera streaming video through RTSP, and I am able to pick up the stream in VLC [URL]. What I need now is a way to show this stream in a Flash application I am developing (probably through the FLVPlayback component?). This means I need a way to "convert" or transcode the RSTP stream to a format supported by Flash, live.
I searched around but couldn't find any conclusive answers... Should I use VLC to transcode the video stream? Something with Adobe Media Server? Is ffmpeg an option here? I have no clue where to start or which option is most suited in this case.
View 1 Replies
Jul 9, 2009
I would like to create multiple swf files that play from beginning to end, then load the next one without users clicking buttons. For example, I may have files A, B, C, D, E, and F. A plays and loads B. B playes and loads C. C plays and loads D..... until F finishes playing then loads A and it starts all over. What is the best way to approach this?
View 1 Replies
Feb 4, 2009
way to play back an FLV video in slow motion. Ultimately, I would like the FLV player that I am developing to have the ability to both:
1) Play videos in slow motion; and
2) Play videos on a frame-by-frame basis (i.e. a user would click a button to advance the video one frame at a time).
Do you know how I would be able to accomplish both of these?
View 4 Replies
Dec 25, 2010
Everything is in the title!I am making an animation, followers know that I am making a turning envelope, and I need that it returns to its initial position when the mouse rollOut but from its actual position in the animation, so an inverse timeline playing would be perfect! But does it exist?
View 2 Replies
Aug 7, 2010
I want to add an animated .gif file to my movie. So I created a new symbol and then imported the .gif file to the stage. This created the symbol containing the animated .gif.I dragged the symbol onto the scene where I want it. However, the animation seems to play at a different speed (fps) than normal. So I changed the fps of the symbol (at bottom of Timeline where it says "fps"). But for some reason this changes the fps of the rest of the entire movie.
View 3 Replies
Dec 13, 2009
I'm tweening a movieclip from startX to finishX. The value of startX varies but finishX is a constant. But as the startX increases in value the animation appears to be quicker. How do I adjust the speed of the tween to ensure a consistant speed regardless of the value of startX?
View 1 Replies
Jul 24, 2009
is there anyway to change a songs playback speed depending on a speed variable. heres the kicker tho im limited to using only as2.
View 2 Replies
Mar 12, 2010
I was trying to accomplish this same effect using actionscript 3.0; (click the forward and back button next to the recent work)[URL] he has made buttons play a movieclip at different points of a timeline...Basically this is what I came up with (see my cooment).
//Flash - go get code that's going to make the tween work... import fl.transitions.Tween;import fl.transitions.easing.*;stop();
//home_mc animation - animate in..var gd_fullsize_01Tween:Tween = new
[Code]....
View 1 Replies
Nov 19, 2010
I want it to automatically detect if there's a live video,then play live;otherwise play back.
View 2 Replies
Jun 10, 2011
I am working on an application that mixx sound and then export it into a specific fotmat like mp3.
is ther a way to mix multiple data sound in one bytearray without playing it.
View 1 Replies
Feb 25, 2012
I want to use the ActionScript 3 Camera class to capture a video from a local camera (webcam, built-in camera, etc) and then play that video back within the flash application.I'm considering the possibility of sending it to a Flash Media Server and then streaming it back as an on-demand video, but I would ideally like to keep the whole thing client-side for best performance.I'm open to the idea of using a different platform (Java was one consideration) as long as it can be embedded in a web page, but I would like to keep development as straightforward as possible and make the process of accessing the application as easy as possible for the end user, which is why I chose Flash initially.
View 2 Replies
Aug 26, 2008
Is it possible for a flash header to play continuously through several html pages without going back to the first frame on each page load?
View 3 Replies
Dec 20, 2007
Code:
onClipEvent(load) {
this.rotateTo(2,2,"easeinoutbounce",20);
}
i want to rewind or reverse back to the original and play over + over again....?
View 2 Replies
Aug 25, 2011
I've got an MC calle "films" and inside of it I'm animation a bar of images across the screen from frame 1 - frame 180. At frame 180 and need it go back to frame 90 and play.I named fram 90 "repeat" and added the following code to frame 180:
stop();
this.gotoAndPlay("repeat");
But it doesn't goto 90 and play it goes back to 1 and plays.
View 1 Replies
Jun 5, 2011
I am using Video (actionscript-controlled) component in my videoRecorder swf. What it does is it connects to webcam, record the video. This works fine. The problem comes when playing the flv back.After user stops the recording, I am using the same video component to play back the flv. But, it doesn't work. Checked the url, and its fine.When I use the same flv url in any flv player, the video gets played back. Am I missing something? Or Video (actionscript-controlled) can't handle playback videos?[code]
View 0 Replies
