I've loaded an image with a loader, and if I add the loader to the stage, all is well, the image looks fine. Although if I add the loader inside a display object container, then the image gets distorted- and on top of that, trying to change the width and height once its in the container doesn't work either.
View 1 RepliesI am using Flash 8. For the site I planned to use dynamic text boxes for each page so my client can update the pages. There is no text, just an image.
Go to: [URL] After the intro, click on Featured Listings, Buyers Needs or Bio & References.
The image is distorted. Also, for some reason the dynamic text box is about 350px and the image size displayed needs to be 525 to fit correctly.
Here is the action script I used:
myData = new LoadVars();
myData.onLoad = function(){
myText_txt1.htmlText = this.content;
[Code].....
I need to create a gallery to load images and display them. This part is fine:
/**
* @variable image_name to store the name of the selected item
*/
private function showimage(evt:Event):void
[Code].....
where imgMain is the id the image component.
But, I need a small twist. A transition image i.e. loading image should be displayed while the the image is being loaded.
In my movie I have a few products that I resize dynamically based on which one is selected. the selected product is shown full scale while the other are scaled back. However the scaled back ones lose image quality and look pixelated. the products are currently movieclips in my presentation. Is there a way to use scale w/o it distorting the image? I'm currently using TweenLite for my tweening/scaling.
View 1 RepliesAm working on a simulation and am running into some trouble. I am attaching what I have so far. (I'm just in beginning stages so it's nothing fancy) What I still need to do is place the main image into the code using this code:
[Code]...
My code:
ActionScript Code:
var request:URLRequest = new URLRequest(XMLslides.item.thumbnail[i]);
var tloader:Loader = new Loader();[code].....
Works fine (it's in a for loop, ...after the main XML object is loaded)... but this:
ActionScript Code:
var request:URLRequest = new URLRequest(XMLslides.item.thumbnail[i]);
var tloader:Loader = new Loader();[code].....
Causes those thumbnails to be attached to the masked buttons, but not the new ones.Is there a way to do this without creating another loader object? I want to keep it efficient.
I've got a few spites on stage that are created dynamically and live in an array. I'm rotating images through these sprites and now need to know which image is in a sprite when clicked. My code: loading the images:
[Code]...
im working on an image viewer and im loading an image to a loader and then add the loader to the stage.I want the user to be able to drag and drop the image but since it's a loader i dont know how to do it.
I tried
imageLoader.startDrag = true;
imageLoader.content.startDrag = true;
but im getting an error on both.
I have a Movie Clip object with a timeline, and it has 3 layers: a layer to stop the timeline at the last frame, a layer with regular drawing with mask attribute and a layer containing a target movieclip with the instance named 'target', that is masked by the layer above.
The drawing is very simple, not even a movieclip, just vector drawing. It's supposed to show the target movieclip only on regions where the mask layer has some drawing, right?
So, I created the method to load an image, listen to the complete loaded event and add the image to the target masked movieclip, but it disappears after the first frame! If i delete the layer with the mask drawing, works fine.
Here's a smaller version of the code.
package
{
import flash.display.*
import flash.events.Event;
[Code].....
So I have this Photo class than handles loading a pic, and dispatches an event when the loading is done with:[code]which is simple and works, but now I'd like to make something more advanced. I'd like to dispatch the load ratio.So far I have extended the Event class, with my own EventRatio class, and I can put properties on that class. Which is cool, but I need something more dynamic than just sending a fixed value.So, what is the best way to connect the Loader object of the Photo object, with the EventRatio object?
View 5 RepliesI used some code that I found, I think even from you guys the scale an external swf being loaded onto a background movie clip. Works great with the exception that it clips some text and creates some funny diagonal lines and some poor picture quality. I have a feeling that this is down to a slight difference in sizing some where along the line. The stage size is 2560 x 1440 being scaled down to any size, but as I mentioned I don't think the height and width are quite in sync for the widescreen format.
[URL]
// perform initial size check
checkStageSize();
// register to re-check when stage size changes
stage.addEventListener( Event.RESIZE, onResize, false, 0, true );
[Code]...
i have a textField wherein i uses embedded fonts, the problem is when i change its size and i do not set the SAME scaleX and scaleY value, it seems to compress the letters inside it when i make it smaller, and stretch the text when i make it bigger... i tried using width and height values (instead of scaleX and scaleY but its the same result)... it seems that the embedded fonts are maintaining some kind of aspect ratio or whatever, and again this only happens when embedFonts is set to true
View 2 RepliesI have a xml image gallery and I want to add a simple progress bar component from flash cs5 to the thumbs when they 1st load up in the carousel.
I understand about the progress bar and how it works and I have tried all day to insert the correct code into my project but I just can't seem to get it right. I dont want to use buttons for the progress bar as demonstrated by Republic of Code, I would just like the progress bars to load when thumbs are loading.
I have included below the progress bar AS3 code from the site "republic of code" which I have been learning from. Also below is the code from my xml gallery.
progress bar AS3 code
import fl.controls.ProgressBar;
import fl.controls.Button;
[Code].....
i have created a preloader for my swf file. I want to simply add an image onto the stage whilst another swf is loading. My image is saved in a movieclip called image in the library. How would i add it to the stage and make it stay there whilst it is being loaded. I have tried manually moving it onto the stage but it only stays for 1 frame.
import flash.display.*;
import flash.events.*;
import flash.text.*;
[code].....
i have created a preloader for my swf file. I want to simply add an image onto the stage whilst another swf is loading. My image is saved in a movieclip called image in the library. How would i add it to the stage and make it stay there whilst it is being loaded. I have tried manually moving it onto the stage but it only stays for 1 frame.
import flash.display.*;
import flash.events.*;
import flash.text.*;
[code]....
Is it possible to add the same Loader to many different DisplayObjectContainers?
I'm using a Loader instance to load an image which I would like to place in about 40 different Sprites. Using the addChild function the loader can only be added to one Sprite though. Is there any way around this or do I have to create 40 different loaders also?
Or is there a way to load an image straight into a Sprite without even using the Loader?
How would I make an image I load using AS3's loader class into a button with an event handler on it? Below is what I have started. And below that is my error I get when I click the message.
AS:
//call function that starts loading my image
callButtons();
function callButtons():void {
[code]....
the error I am getting when I click the spanish.png on the stage is: ArgumentError: Error #1063: Argument count mismatch on MyVideoPlayer_CS4_fla::MainTimeline/playSpanish(). Expected 0, got 1.I NEEDED TO ADDED evt:MouseEvent
I have this piece of code to change images. I was trying to figure out how you could put a timer on the code, so if the image has been displayed for say 5 seconds it diverts to the next image automatically? Also if it's not to hard, when it has played to the end to divert to the 1st image.
[Code]...
[code]This script is for a loader image gallery in flash, as part of a class assignment. What happens is that in flash, when I open the swf file, the initial image (images/nair_evanescentautumn.png) will load fine. However, clicking on any thumbnail image (including the exact same images/nair_evanescentautumn.png), will result in an error saying the file cannot be found.I cannot figure out why it is doing this... I've tested it over. Clicking each thumbnail does go to the correct position in the two separate functions. All said full-size image links are in the folder images/, and replacing the initial loader image will load the other images in place of the default one. However, clicking on any thumbnail still results in URL not found, even though everything works correctly.[code]Before anyone asks why I'm putting this kind of content into a flash site, I'm not--this is only for a class assignment. I'm just trying to figure out why my images aren't loading right when I'm only doing the exact same thing in the functions as I am on the other pages.Of note, commissions.swf has the exact same feature, just with swf files loaded instead, and it works perfectly fine. home, traditional, digital, and photography all have the image gallery, and all have the same issue (I only referenced one page because if I can fix one page I should be able to fix all of them).As for the artworks, they are all my fiance's. The website design was built for her, and I used the website design for this project because I didn't want to have to build an entirely new interface design. Since the project also required a gallery, I felt that this interface would work just fine.
View 3 Repliesim having trouble adding a progressbar components to a loader...all the images load and the progress bars too but the progress bars only change when they reach 100% and they do not disapper either..
View 2 RepliesI'm loading .JPGs into loaders, setting the alpha of the loaders to .5 and would like to add a ROLL_OVER event to set the alpha to 1 then back to .5 on ROLL_OUT.Here's what I've got so far and it works well.
var ldr1:Loader=new Loader();var url1:URLRequest=new URLRequest("thumbs/1t.jpg");ldr1.contentLoaderInfo.addEventListener(Event.COMPLETE, done1);ldr1.load(url1);
function done1(event:Event):void{ event.target.content.alpha=.5; event.target.content.x=currentX; //currentX & Y are already set event.target.content.y=currentY; addChild(event.target.content); currentX+=event.target.content.width;}
NOW, I'm trying to add the MouseEvent and can't figure out what to add the listener to - the loader or its content?
ldr1.addEventListener(MouseEvent.ROLL_OVER, rollOn); <<<<--- this doesn't work.
ldr1.contentLoaderInfo.addEventListener(MouseEvent.ROLL_OVER, rollOn); <<<<---this doesn't work either.
I have 4 separate photogalleries, they are all swfs called by buttons with UI loaders attached. The problem is when one is called the loader remains on the stage I need to be able to remove any loader on stage BEFORE calling another page weather its a photogallery or not.Easiest explanation is how I used to do it in AS2 example 2 btns /2 load separate swfs into level1 on each btn I would have
unLoadMovie(1)
LoadMovie (xxx.swf) 1
I need to do the same thing in AS3 Also, do I need to use separate loaders or can I use one loader and instance names? Below is the code I have now (btns are in two areas)
main timeline btns (all btns except photogallaries)
stop();
home_btn.addEventListener(MouseEvent.CLICK, onHomeClick);
[code]....
I have made a photogallery in actionscript 3 which uses an .XML file to import pictures. As the user clicks on the displayed image the code loads the next image in the cycle into the display. Now, I would like to add a preloader which displays the loading progress of each image as the user clicks (otherwise there is just a blank area as the image loads). I have made a pre-loader for the main .SWF but I can't figure out how to make it work for the images or how to make a seperate one for the images. The fact is that I am a bit of a muppet when it comes to AS3, and am finding myself getting lost an confused quite easily.
I have attatched the .FLA if that helps any! If not then...
here is the link to the .HTML page that contains the .swf:
[Code]...
I'm developing an ActionScript 3 app for Blackberry PlayBook.
I'm loading an image with flash.display.Loader.
I want to show that image with a 5px black border.
How can I do that?
I'm trying to make a navigation system for my website where each nav item is loaded as an external .swf. I was able to get that functionality in place. The problem is I want to add a preloader for these external swfs as well.
The code I'm working with is this:
var loadedSWF:Loader = null;
/**
* Loads an SWF and adds it to container once complete
* @param file The URL to the SWF to load
[Code].....
I want to move my multiple externally loaded images a little each time they are added to the stage along the x axis via the Loader class. It all works - But HOW do I access the added graphic synatically, so i can change its x pos?! Ive tried picLoader.x ... but that's the Loader - NOT the image...??
Code:
private function setPics():void
{
for(var i:int = 0; i < xItems; i++)
[Code].....
I've looked through a couple threads here about reflecting images... but I don't quite understand it. I will include a link to my project thus far: Final Project First of all, ignore the music/mp3 items at the bottom of the stage. Those aren't wired up yet. When you click on a bike image on the right, the reflection image should appear under the image... but it's not quite working out that way, and I've tried a few things. Here's the segment of AS3 code that is giving me trouble:
[Code]....
I have a dynamic text field which is loading images from an external html. This text is named scrollPaneImage and is a child of a movieClip called scrollPaneContent. I then load scrollPaneContent into a scroll pane named scrollPane
When the user interacts with my swf different images are loaded into scrollPaneImage. Since some of the images take a few seconds to load, I'd like there to be a progress loader displayed in the scrollpane.
I have tried adding the progress event listner to the dynamic text, the movie clip and the scrollpane and cannot get it to respond or track the loading.
scrollPaneContent.addEventListener(ProgressEvent.PROGRESS,reportProgress);
function reportProgress(e:ProgressEvent):void {
trace(e.bytesLoaded + " loaded out of " + e.bytesTotal);
trace("LOADED");
}
A basic image loader, looks like this:
var my_loader:Loader = new Loader();
my_loader.load(new URLRequest("imagename.jpg"));
movieclipinstancename.addChild(my_loader);
[code].....
I'm trying to simply have 4 images at a time appear, then scroll over one image when a button is clicked. I'm using the Loader component to call in the external jpgs. This works perfectly in Firefox and when I preview it in Flash, but in IE the images don't load properly. I'm scaling them down using the Loader parameters, but IE usually tries to load the full-sized images. You can see the problem if you visit [URL]
View 1 Replies