I'm trying to simply have 4 images at a time appear, then scroll over one image when a button is clicked. I'm using the Loader component to call in the external jpgs. This works perfectly in Firefox and when I preview it in Flash, but in IE the images don't load properly. I'm scaling them down using the Loader parameters, but IE usually tries to load the full-sized images. You can see the problem if you visit [URL]
View 1 Replies
why this isn't working with as 1.0? I have to publish it with 1.0 for other reasons. basically i want a simple preloader:
[Code]...
it goes straight to 100% when viewed through the download simulator, but the image isn't actually loaded. I don't really know as 1.0, just 2.0.
im working on an image viewer and im loading an image to a loader and then add the loader to the stage.I want the user to be able to drag and drop the image but since it's a loader i dont know how to do it.
I tried
imageLoader.startDrag = true;
imageLoader.content.startDrag = true;
but im getting an error on both.
How would I make an image I load using AS3's loader class into a button with an event handler on it? Below is what I have started. And below that is my error I get when I click the message.
AS:
//call function that starts loading my image
callButtons();
function callButtons():void {
[code]....
the error I am getting when I click the spanish.png on the stage is: ArgumentError: Error #1063: Argument count mismatch on MyVideoPlayer_CS4_fla::MainTimeline/playSpanish(). Expected 0, got 1.I NEEDED TO ADDED evt:MouseEvent
I have this piece of code to change images. I was trying to figure out how you could put a timer on the code, so if the image has been displayed for say 5 seconds it diverts to the next image automatically? Also if it's not to hard, when it has played to the end to divert to the 1st image.
[Code]...
[code]This script is for a loader image gallery in flash, as part of a class assignment. What happens is that in flash, when I open the swf file, the initial image (images/nair_evanescentautumn.png) will load fine. However, clicking on any thumbnail image (including the exact same images/nair_evanescentautumn.png), will result in an error saying the file cannot be found.I cannot figure out why it is doing this... I've tested it over. Clicking each thumbnail does go to the correct position in the two separate functions. All said full-size image links are in the folder images/, and replacing the initial loader image will load the other images in place of the default one. However, clicking on any thumbnail still results in URL not found, even though everything works correctly.[code]Before anyone asks why I'm putting this kind of content into a flash site, I'm not--this is only for a class assignment. I'm just trying to figure out why my images aren't loading right when I'm only doing the exact same thing in the functions as I am on the other pages.Of note, commissions.swf has the exact same feature, just with swf files loaded instead, and it works perfectly fine. home, traditional, digital, and photography all have the image gallery, and all have the same issue (I only referenced one page because if I can fix one page I should be able to fix all of them).As for the artworks, they are all my fiance's. The website design was built for her, and I used the website design for this project because I didn't want to have to build an entirely new interface design. Since the project also required a gallery, I felt that this interface would work just fine.
View 3 RepliesI need to create a gallery to load images and display them. This part is fine:
/**
* @variable image_name to store the name of the selected item
*/
private function showimage(evt:Event):void
[Code].....
where imgMain is the id the image component.
But, I need a small twist. A transition image i.e. loading image should be displayed while the the image is being loaded.
I've looked through a couple threads here about reflecting images... but I don't quite understand it. I will include a link to my project thus far: Final Project First of all, ignore the music/mp3 items at the bottom of the stage. Those aren't wired up yet. When you click on a bike image on the right, the reflection image should appear under the image... but it's not quite working out that way, and I've tried a few things. Here's the segment of AS3 code that is giving me trouble:
[Code]....
The following action script for loader is working fine:
var l:Loader=new Loader();
addChild(l);
l.load(new URLRequest("MyLogo.swf"));
But when I added one more loader to it like the following...It doesn't show anything but gives an error:
[Code]....
I'm trying to do in this case is populate a List UIComponent that I created with information that I get back from the PHP file. For some reason the loader.addEventListener(Event.COMPLETE, userOnLoad) isn't working and my program never gets any farther than that.
Here is my code:
import fl.controls.*;
import flash.display.Sprite;
import fl.managers.StyleManager;
DECLARATIONS
var backgroundArea:Sprite = new Sprite();
var loginArea:Sprite = new Sprite();
var userArea:Sprite = new Sprite();
[Code] .....
I want to create an image slideshow. When the user clicks the next button, I want the current image to fade out and the next image to fade in. I'm using Loader to load images, using .load(new URLRequest("imagename.jpg"). When the first image loads and next button is pressed, the image fades out just fine. The problem is when the second image loads. the image loads, but doesn't fade in, it just appears without the tween. Here is my code:
Code:
import flash.display.MovieClip;
import flash.events.MouseEvent;
import com.greensock.*;
[Code]....
I'm trying to load a .png and display it but the iPad and iPhone show a white screen. Here is my code:
Code:
public class Test extends Sprite
{
private var loader : Loader;
private var urlRequest : URLRequest;
[code]....
This works fine when tested in AIR but not when I test on the device using the [TEST on DEVICE] build. My TestImage.png is in the bin folder where my Test.swf gets compiled into.
package
{
import flash.display.DisplayObject;[code]....
I just inherited some code that produces an embedded rdio music player into a swf. It works great in firefox and safari, except the embedded player does not appear in Firefox... Is this a common issue with the Loader class or contentLoaderInfo events?
import flash.display.Loader;
import flash.display.Sprite;
import flash.display.StageAlign;
[code].....
I'm having trouble with a simple loader not loading an external swf file.I have a set of menu buttons (created from a class) that store the swf file name. When these are clicked they run a function that supposed to load the swf file but for some reason it doesn't (but maybe it does load it, just not display it). So here's the code:
Code:
var urlLoader:Loader = new Loader();
var pageHolder:Sprite = new Sprite();
[code].....
I have recently created a game in Flash CS3 with AS3 which displays a random picture (this is a pretty integral part of the game).I have written a small procedure to resize the picture to an appropriate size for the flash application. This is as follows:
ActionScript Code:
function onComplete(ev:Event):void {
var maxheight = 240;
var maxwidth = 400;
[code]....
Here is where it is called, please just take for granted that d_arr[1] contains the correct URL of the image I want to load :-)
ActionScript Code:
var url = d_arr[1];
var urlRequest:URLRequest = new URLRequest(url);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,onComplete);
[code]...
This resizes the picture when it is fully loaded. This seems to work fine on my own site, but on the sites to which mochi ads has distributed it, it doesn't resize the image at all, even if it is left to fully load.
In my current flash application I and my co-workers are using Loader to load some SWFs from our server. It works perfectly while we have the flash application on our computers running it trough Adobe Flash CS3 but when we publish it and move the html page to our server and try and run it from there the loading doesn't seem to start. I have the firebug plugin for Firefox so I checked if flash actually loaded the images and according to firebugs network monitor it found all needed resources and downloaded them successfully. But the behaviour of our application is as if the loading starts but the complete event is never sent.
View 3 RepliesI'm having trouble getting my preloader working using the Loader class, here's the code so far...
[Code]...
I have a really simple class that loads in some XML and splits it into an array, but for some reason the URLLoader wont trigger the COMPLETE event.
Code:
package com.georgecrabtree {
import flash.events.Event;
import flash.net.URLLoader;
[Code].....
I'm running into a problem loading an external swf. Check it out here: [URL]
If it's working right, the top and bottom red areas should end up looking exactly the same.
I have "init.swf" loading "cc_home.swf" into a container. When successful, it should fade up (that animation is in "init.swf") and then load the white text (cc_home.swf). What you're seeing on that page is init.swf on top, and cc_home.swf down below.
When I test init.swf directly from Flash, it works fine. In the browser, though, it doesn't load the movie.
Here's the code I'm using in "init.swf" to load cc_home.swf (which I got from Kirupa):
var mycontainer:MovieClip;
var myloader:Loader = new Loader();
var urlrequest:URLRequest = new URLRequest("cc_home.swf")
myloader.load(urlrequest);
[Code]....
I'm having trouble with a simple loader not loading an external swf file.
I have a set of menu buttons (created from a class) that store the swf file name. When these are clicked they run a function that supposed to load the swf file but for some reason it doesn't (but maybe it does load it, just not display it). So here's the code:
Code:
var urlLoader:Loader = new Loader();
var pageHolder:Sprite = new Sprite();
pageHolder.height = 420;
[Code]....
The "page loaded" trace is being displayed, so must load the swf but not show it.
I can't even see the preloader. I also tried a very simple swf file with just some shapes and 1 frame but still no luck.
I have confirmed to my satisfaction that the following code never triggers the Event.COMPLETE of var loader:
var loader:URLLoader = new URLLoader();
var req:URLRequest = new URLRequest(contact_url);
var variables:URLVariables = new URLVariables();
loader.dataFormat = URLLoaderDataFormat.VARIABLES;
req.method = URLRequestMethod.POST;
[Code] .....
However, it does in fact send the emails it is designed to send! Why doesn't it complete when in fact the work is done?
So my problem may be a little bigger than that, but I'm not certain. I'm creating a custom flash photo viewer for a client that dynamically loads the images with Loader objects. It takes a folder name in a specified directory on the server and calls a php page (using URLRequest) to get the workable contents of the folder. And then it loads it up from that array.
Here's the problem: it works FINE on my machine and every machine I've tested it on, but it DOESN'T work on my client's machine or some of his customer's machines. The loader bar that's at the bottom of the screen doesn't start to fill, which means that the images aren't starting to even load, and the status bar indicates that it continues to wait for a the server, yet never finishes waiting. This is consistent on a single machine, but varies across machines.
I've added diagnostics (a custom class I made to track certain vars and collect errors) to the thing to catch any errors, but it reports nothing on my client's machine. I've added flash version checking code, so the possibility of a lower version messing it up is gone... I guess my question is, is there anything (security, environment, etc) that I could have overlooked that doesn't allow request objects or something to work on certain machines?? I've been ripping my hair out trying to figure this out!
[Code]....
On my stage I have a mc (videoLoader) with the mc (loadBar) inside it. When I preview the movie it shrinks loadBar to where it should, but it doesn't expand as the video loads.
ActionScript Code:
this.addEventListener(Event.ENTER_FRAME, loading);
function loading(e:Event):void[code].........
I am trying to load an image. The image paths are stored in an xml file called "setup.xml". I'm getting the strangest error. Never seen it before.
[Code]...
i am trying to load array of pictures dynamically in to a loader component,the picture after loading in to loader component i am resizing it to required size.
115 is the width and height of loader component.
.complete = function (eventObject)
{
loader.redraw();
x_txt1= loader.width;
y_txt1= loader.height;
[Code]....
but if i select next picture while fullscreen then loader.width and .height shows as 0 and picture is not displaying.
A basic image loader, looks like this:
var my_loader:Loader = new Loader();
my_loader.load(new URLRequest("imagename.jpg"));
movieclipinstancename.addChild(my_loader);
[code].....
I'm coming from AS3 and I'm trying to mask a SWF file that's being imported in but it's doing something pretty funky. The SWF file is coming in fine, but when I'm masking it, it shows the shape I'm masking with, but it's also masking because nothing is going beyond its' edges.
{
var mask_mc:Shape = new Shape();
mask_mc.graphics.beginFill(0x000000);
[Code]....
Attached is a link to a file I made named "index".I would have liked to have included the following files but was limited due to "you-send-it" not uploading folders.Files not included: [but functioning and vital to the site as well as the question]- xml list- images [folder]- thumbnails [folder]
View 7 RepliesI would like for the website preloader to recognize the random image loader that I have on frame 8 of my siteI have a basic preloader on frames 1 and 2(frame 1)
amountLoaded:Number=_root.getBytesLoaded()/root.getBytesTotal;
(frame 2)
if(_root.getBytesLoaded()==_root.getBytesTotal()}
[code]......
