I have movC_mc inside movB_mc inside movA_mc AS2 to access movC_mc from the my Actions layer in frame 1 in the root would be movA_mc.movB_mc.movC_ mc.My question is how can I target the movA_mc from the root of my .fla.[code]just can't get my head to transition from AS2 to AS3.
View 2 RepliesHow can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop();
function goBack(event:MouseEvent):void
{[code].....
i have a flex app that transitions between 2 states with the toggle of a button. my issue is that the effect of fading only seems to work on the 2nd transition and after. However, for my first transition... going from State1 to studyState... there is no fade effect whatsoever, in fact the components in state1 disappear completely (the footer fills the empty gap where the "body" use to be) and then the flex recreates the studyState (without any fade refilling the "body" with components only in studyState). After this first transition however, going between studyState and State1 working COMPLETELY fine.. why does this happen and how can i make it so that crossfade works STARTING FROM THE VERY FIRST TRANSITION?[code]
View 1 RepliesI have a presentation using the "presentation" template that comes with flash. I am trying to transition slides with the behavior slide transition options. but I've learned that it works find while going into a slide and doesn't go to the next slide when leaving.So basically I want it so that on right arrow first play out transition then go to next slide.
View 2 Repliesa standard view and a "full screen" view...by default the standard view loads and there is a button to switch to full screen...when the standard view loads to begin with...the exhibitor list on the left works fine with the booths in the floorplan....meaning when you click an exhibitor, the corresponding booth lights up...however, when you load the second swf...which loads to _level0 using the following cose loadMovie("standard-0.48.xml", _level0); the exhibitor list does not work quite the same...when I click on an exhibitor now, the color for the whole floorplan changes, and does not change back...and if you click the standard view button, it goes back to the standard view, but again when you click an exhibitor, the color of the whole plan changes...any idea how to fix this?
View 3 RepliesI am trying to create a page transition that will play a movieCLip transition into a page. and then it stops then when another button is pressed, it will play that transition out while loading the appropriate one. In the attached FLA, if you click on the red button first, the blue transition plays,
--red button code--
mybutton1.onRelease=function(){
_root.transitionClip.play();
}
and then stops on the stage. When you click the green button second,
--green button code --
mybutton2.onRelease=function(){
_root.transitionClip.play("out");
_root.transitionClip2.play();
}
it works correctly/ Playing out of the blue Transition and into the Red transition. However if I click it again it does the opposite, and just keep alternating.
If I add the
_root.transitionClip2.play("out");
to the first button then, nothing works right. I will eventually have more buttons, and may need to use a variable to control which "out" transitions is played, but how do I get the buttons to do this?I just want it to exit the current movie clip and play the "in" section of the desired clip.
Im having a small problem with a 2d array Ive been coding for sometime now previous to actionscript Ive programmed in Java and Ive always accessed 2d array elements in the following way
Myarray[column][row]
Column before Row
X before Y
Width before Height
Im working on a project where I want to pre declare array elements something I haven't had the need to do before and Im using the following syntax to achieve this
var myarray:Array = [[0,1,0],
[1,1,1],
[0,0,0]];
Im writing it this way so that its clear how the information will be seen on screen as the 1's in the array will be converted to images the 0' denote a absence of an image.The problem Ive got is in order to access these elements I have to write Myarray[row][column] And I would much prefer to access it column first Myarray[column][row] as its what im used to and its too head banging to change over.Is there anyway to declare the array how i am doing now ie
c c c
var myarray:Array = [ r [0,1,0],
r [1,1,1],
r [0,0,0]];
And then twist the array something like this (note! not code syntax just a visual representation)
c c c
[0 [1 [0 r
1 1 1 r
0] 0] 0] r
Is there a method in as3 to achieve this or does anybody know of any short simple code to do it with
I don't really know how to describe this problem but I'm going to give it a try. I am working in Flash cs3 using as3. I have a project with 5 scenes and button nav to jump between them. When I test the project scene 1-4 play fine however when I get to scene 5 the playback head doesn't move, it just stays parked on frame 1 (button nav works, animation does not). When I re-arrange the stacking order of my scenes the same problem will occur in a different scene that had previously played fine. This issue only occurs when i test the whole movie - if I test any scene by itself it plays fine. I am not getting any AS errors which adds to the frustration
View 7 RepliesAs I use play(); in a button-script to send the timeline head forward in my mc animation, which is the simplest way to tell another button to send the head backwards?
View 5 RepliesThere's a lot of talk of how the new Event Flow makes for easier communication between classes.This sounds swell,but nowhere is it properly explained. Every example I find concerns dispatching events within the same class or looped through a customEvent, but I need a way to tap into this Event Flow for backward communication.I have a mainGUI document class that distributes my application subclasses.How do I set up a listener within mainGUI that gathers certain events from any of its children or grand-children? And how can I use this line to post object properties?
View 1 RepliesI'm using Flash MX (2002) and I need to get my variable values saved to a server each time my test subjects run and finish my swf/fla (PHP scripts and a .txt file on the server are being worked on, but that's a different nightmare!). I'm pretty sure I should use LoadVars, NOT SharedObject for this data capture right?. The data must not be overwritten each time over the course of a few months of data collection.
The 3 variables are: username (name of the user), counter (this keeps track of which version the user chooses from the start menu), numcorrect (keeps track of the number of times the <right> arrow key is pressed).
I don't know where to put in the LoadVars obj (in the AS code of "finaldisplay" frame?) AND I don't know how to build/format the LoadVars object to capture the data in the 3 variables I listed above.
find out where the play head is?
I'm trying to do something like this
Code:
if(_root.movie.currentPlayHeadPosition == 1) doSomething();
Its been a long time since I last did any flash, can anyone jog my memory on how to get the current frame?
I want "rain drops" to fall randomly and then when they hit the bottom most pixel of my stage to run another movie clip called "splash" so it looks like it is raining and the "drops" could fall and "splash" at the bottom of the stage.
View 9 Replieshow will be actionScript for waiting the play head in a frame for 5 second ?
View 5 RepliesI am using flash CS4 and ActionScript 3.0 i have a movie clip on stage that i have close when the user hits a button how to i also tell the maine time line to go to a frame when this button in the Movie clip is pressed?
View 2 RepliesBy far the weirdest thing I've ever seen. On some machines (!) IE (!!) attempts to load an SWF file via HEAD request instead of GET. This happens only when the page is running in Facebook IFRAME application - when running solo works fine. Naturally, on FF and Chrome everything works just fine. The SWF is embedded using jSWFObject. There's no visible common feature to the machines which experience this problem - laptops, desktops, XP, Vista, 7.
View 1 RepliesI would like to construct a RegExp/Actionscript3 statement/routine that will do the following:
1. Locate the link containing the favicon. Note that there can be many <link>s in the <head> so I am looking for the one that specifically includes the : <link rel="shortcut icon" ...favicon.ico">,
2. Most favicons are in the ".ico" format, but I have seen favicons that are .png and .gif formats. The next step is to save the .ico in a .png format
I'm trying to wrap my head around writing .as files in MX 2004. As a practice file I made a MovieClip called SquareClip in the library of flash file. I made the linkage name SquareClip. My .as file called Square looks like this:
[Code]...
Been creating a scroll bar for images. the issue is i cant seem to get sensible stop parameters for the ends of the scroll and scroll bar button. my formulae just wont tie in with the positions at extreme left and right of content/button movement.
The number of images scrolled in the scroller is set by a txt file and is currently at 16, but this is to be changeable. that bit is not an issue, just the scroll parameters. Oh and the Images are in an "images" folder - surprisingly!
[Code]...
I make a flash movie. I want to create a progress bar with custom play head that when we drag it, the swf file will adjust appropriate position, similar to the progress bar in comman media players. My main swf file has about 2000 frames
View 2 RepliesI am trying to create a character whose head will follow the mouse. I have made a character whose eyes are following the mouse, but I would like the head to turn with the mouse as well - like the cyber pets here.
View 3 Repliesvar mySound:Sound = new Sound();
mySound.loadSound("http://192.168.0.121/work/vivek_php/fatima/myFavSong.mp3");
mySound.setVolume(20);
trace(mySound.id3);
mySound.start();
trace(mySound.position);
I'm trying to make this script work in which two things should happen onRlease of a movie clip. The "transition" plays but frame 18 doesn't..even though the path is right. I even tried frame label even that doesn't work.I must be doing something wrong, maybe you can detect from this script. The script is on the clip itself.[code]
View 7 Repliesi have looked everywhere for a tutorial on this - i have tried writing, and re-writing codes....i just cant get it. is there any tutorial i overlooked? here is what im looking to do - NO SHORTCUTS: have my main file that loads the buttons, my external swf container, my intro animations, and my swf "out" and "in" animations when a button is clicked i want it to point me to specific frame labels. i will have an "out" and "in" frame label and which will be the locations of the transitional starting points i want it to play the "out" transition, than unload the current swf, than play the in transition, than load the swf of the button that was clicked i want the animations to all be done using frame labels all within the MAIN swf file.... i have had no luck doing this....and i do NOT like the tween class....
View 10 Replieswould like flash to trace something when the play head goes over a frame label named "test" I would also like to have the code placed on the first key frame. I realize that the easiest way out would be to place the trace statement on the frame with the label on it but I'm trying to run this with a listener.
PHP Code:
stage.addEventListener(Event.ENTER_FRAME, checkFrame,false,0,true);
function checkFrame(event:Event):void
[code]....
anyone can offer me a way of housing an XML return in a seperate object, so that the flash movie in question doesn't hang around waiting for the feed to come back.The problem is we have an asp app which is returning the status of about 1000 citrix terminals at once.... while this only takes 10-15 seconds to return, any kind of animated loader i build into the movie, stops playing while flash holds on the XML return, as the http response status never responds dead, but says "waiting" instead.Any kind of way of adding the XML load script as an object listener maybe...?
View 3 RepliesI am trying to acomplish a very simple task with AS 3 with no results. I have a simple time line with a stop button. All I want to do is to stop the play head wherever the viewer clicks the button, and then to start again from there when the button is clicked again.
View 4 RepliesI'm wanting to use a button in flash to call a javascript function that resides in my main html page.I think this can be done, but I'm not sure how to do it?
View 1 RepliesThe movie clip is called "theScene" and I have it created on Frame 60 of a movie clip when a button triggers the playhead to jump and stop at Frame 60. However, upon leaving that frame, it will not disappear, so I want to unload it upon leaving that frame.I put in the following code across all frames of the movie clip in its own layer:
Code:
if (this._currentframe !=60)
{
[code]....
So I am able to dispatch the event from one class and trace out that the custom event was dispatched, but where I am having trouble is listening for that event in another class.
[Code]...