what I am doing is an animated flash version of a rockola bubbler jukebox. Problem is, the bubbles. I have tried just doing something simple with movie clips and motion paths, just on the animator side / no actionscript code. I wouldnt mind using AS code, but I am pretty novice at it ( very novice actually ) and am having troubles.I cannot get a constant stream of bubbles though and it looks bad.
View 1 RepliesOk so I did the whole snow falling tutorial - everythign works fine. I used my own bubble and removed some unnecessary code (might be what's causing the problem but i doubt it). All I want the bubbles to do is rise instead of fall like the snowflakes. I know how to get the bubbles to go up but I don't know why they are not reproducing again after the initial bunch goes away. I have attached the code...but it's pretty much the same as the tutorial - what do I need to do to make it work?
View 1 RepliesAll I want the bubbles to do is rise instead of fall like the snowflakes. I know how to get the bubbles to go up but I don't know why they are not reproducing again after the initial bunch goes away. I have attached the code. What do I need to do to make it work?
View 1 RepliesI am looking for a flash script that would have hearts floating softly down the page. If anyone knows of something I could use or even something that I could easily modify
View 1 RepliesI'm trying to make this banner for my cartoon website, where a thought bubbles pops up whenever someone hovers over one of my cartoons.
View 9 RepliesI'm trying to make a simple animation where there is ten balls floating around the stage, I want to be able to click on any of the balls and "throw" them. I'd also like there to be a boundary around the stage so the balls bounce off this when thrown.
View 4 RepliesI have an image that has call out bubbles in it (call out = comic book text bubbles - i didn't know they were called that). I need to find where each of these are in a given image and get the location and size of each of these.
AS3, Flex, Bitmap
I have a sprite called content.In this sprite there are multiple children that I add and remove (lot's of traffic there)these children dispatch events that bubble.I have an event listener listening to content and checking for the same type of event.[code]But the problem with the second model is that I would have to track every time something is changed in the children tree and add the event listener which kinda defeats the entire purpose of bubbling for me.
View 1 RepliesSo I've modified the code for the snow demo for a practice site (made it into bubbles instead of snow) but for some reason, the bubbles appear on top of every layer, even though they're on the first layer. Is there something I can do to tweak the actionscript so the bubbles stay on the first layer?
View 4 RepliesI want to make a light animation where air bubbles come out of a bucket (which slowly moves from left to right) and they float till a certain height untill they dissolve (fade to 0%). I want to have 3 different kind of bubble MC's which I want to generate (duplicate MC???) at random. Further I don't want them to clog eachothers, so they should not be able to move on top of eachothers.For filesize reasons I want to do this as much as possible with an actionscript...
View 14 RepliesI have small swf as3 flash applications that are loaded by a main flex application. The main Flex Application contains an SWFLoader and i added an event listener on SWFLoader.content to fetch custom events that I prepared.
now whenever I like in the application I use the function dispatchEvent to create the event and I make sure that the bubbles parameter of the event is true. so in this case the event bubbles up in the stage until it reaches my event listener and I can handle the event properly. the problem resides when I have a static class and I want to dispatch the event from there. because it's a static class and not a display object that appears on my stage it has no where to bubble to and because of that I cannot fetch the custom even in my main flex application.
[Code]...
I'm trying to make a custom event that bubbles up from the Items object in this code to the Main object, and start the changeInfoHandler there. For some reason, it works when I put the dispatchEvent in the Items object inside a handler for a mouse click, but when I try to bypass that and call the function directly, it seems to only work in the scope of the Items object.
Main.as:
Code:
package{
import flash.display.*;
import flash.events.*;
import ChangeEvent;
[SWF(backgroundColor="0xefefef", frameRate='60', width='640', height='480')]
[Code] .....
I need create bubbles in flash, I used the fallinng snow script but I need that the particles go to the sky and not go to the floor :This is the code...
onClipEvent (load) {
//specifies the size of the movie stage
movieWidth = 78;
[code].....
I have a Bubble with a dynamic Text Field in the middle of it. I create multiple of these and have them float up. If you click it, I want the bubble to pop. Everything works, but only if you click the bubble at the edges. If you click in the middle, I get this error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
Its a make your own comic thing I'm gonna put on a site. Anyway, when you click/drag the speach bubbles, it draws as you drags. Can I make it so that when I click on those movie clips it dosen't draw?! Also, is there anyway to bring forward the bubbles so that they are always in front of the drawings?
View 1 Repliesclose another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 RepliesOnly just getting started on this whole domain of learning, so go easy!If I set up a P2P video/audio chat (similar to the sample VideoPhone thing on the Cirrus site), can I get the stream from both parties to send to a server at the same time so that I can record it? If so, would I have to use a FMS to stream it to and perform the recording (and if so which version could I get away with)? Are there any (preferably free, or just tutorialised) solutions for the recording side of things?
Currently it seems like the only option for doing the P2P thing is to use Stratus/Cirrus unless I use FMS4 Enterprise.
how effective this kind of situation can be, in terms of quality of the stream and recording? Does any of this make sense?
I've had FMS running on my local machine for a while and have had a little experience writing FMS apps, but I've just tried recording audio for the first time using the standard vod application and I keep getting a "Write access denied for stream" error. My AS3 code is copied and pasted for various examples and am confident that it works.
I'm running Windows XP service pack 3 & FMIS 3.5.
I've had a look at the vod/media directory and under windows->properties the read-only attribute is ticked. Every time I un-tick this it reverts back to being ticked. I've googled this and MS say that most programs ignore the read-only attribute and that it only really applied to files. I've also tried the MS fix for setting the read-only attribute via cmd and still no joy (doesn't fix read-only attribute or FMS recording the audio after setting via cmd).
I've also tried our dev server install of FMS (running under linux) and am getting the same results.
Here's my AS3 code...
private function initApp(event:Event):void
{
removeEventListener(Event.ADDED_TO_STAGE,initApp);
[Code].....
i test the fms 4 update 1 rtmfp streams multicast after 10 minutes i get this message RTMFP Multicast stream has exceeded max duration allowed; closing stream. but i do not use IP multicast
[Code]...
I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
I have recently installed FMIS 3.5.3. In checking the access logs I find data in both logs that display the same stream stop and stream play time .I'm not sure why the time is the same (00:19:27 example below). Videos play fine when testing from work (T3 connection). However, occasionally a very slight hesitation when playing video from home (I have cable connection). [code]...
View 4 RepliesI'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
I am having trouble getting audio stream meta data from an Akamai FMS stream. Everything is undefined and I'm not sure why. I am hoping maybe someone will notice something that I am overlooking. The stream is connecting and playing without a problem I just can't seem to figure out why all the meta data is undefined.
[Code]...
I have a layout with narration and a nav bar. When I click a nav button for section 2, the audio from section 1 (set to stream) continues to play over the audio for section 2. This cumulates so if I click buttons for sections 3, 4 and 5, I get five audio files playing on top of each other. Sections are individual movie clips with embedded audio streaming on a Sounds layer in each movie clip.
View 3 RepliesI'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
I am very new to action script. I want to stop the stream from publishing then later on i want to publish the same stream again. My problem is that I have 3 levels of stream processing (Ingress-Rename ProxyLimelight-AuthProxy-Live) before it goes live. User wants to stop stream from publishing and then publish the same stream when he wants in each level. User does not want to start the stream from the begining, he wants to restart the stream on the same where he stopped.
View 0 RepliesCan I re-stream a stream from wowza to fms 4.5?I have a wowza stream with the url similiar to URL... Is it possible to restream this to fms 4.5?
View 3 RepliesI have a narration and a nav bar. When I click the button for Section 2, the audio for Section 1 continues to play on top of the audio for Section 2.
View 1 RepliesI created bubbles using the snow 3.0 tutorial from here at kirupa. I slightly altered the code so it would be for bubbles on a canvas of 800x500.The problem with the tutorial is that it is for snow moving downward on the y axis. for bubbles in the water, I need them going upward.which part of the code I need to alter so the bubbles will move up and not down? Also, I need the life of the bubble to last the length of the canvas.
Code:
init = function () {
width = 800;
// pixels[code]........
I like the falling snow effect, how its random sizes and alapha channels, but how do you alter the cod so its going up like bubbles and not falling down, I.E. in a fish tank there are bubbles going up constantly
View 6 Replies