What I have is a movieclip and a button in scene 1 (which is the main timeline).There is an actionscript layer also on the main timeline. what I want to do is when I click the button, it would do a nextFrame(); in the movieclip timeline instead of the main timeline.
View 4 RepliesMy issue is that for my website I want there to be movies in between the interactive parts of it where the interfaces slide in and out. However, I can't stop a movie from playing over and over instead of playing once and going to the next frame.With 2.0 I haven't been able to find any research that helps me, probably because I don't know the correct keywords to search for.Right now I have my main time line set up with a loading bar on frames 1 & 2, that then jumps to frame 3 where I have embedded a movie (Instance named: mc_start) of the interface sliding in. Preferably after that I need it to jump to frame 4 where the actual interface is.
I can get the movie to end by going into the embedded movie's time line and simply have stop() ; at the final frame, but I can't get it to go to frame 4 on the main time line. If I having something like gotoAndPlay(4) ; on the final frame of the embedded movie's time line, it simply goes to frame 4 of the embedded time line and not frame 4 of the main time line. If there was a command to make it jump back to the main time line instead of the embedded time line, that would work perfectly.Coding on Frame 3 of the main time line to jump to Frame 4 would work if I knew the correct language to detect when the movie has ended (Movie is 191 frames long), so that afterwards it would immediately jump to Frame 4, but I haven't been able to find any resources that will teach me how to do it. Right now having gotoAndPlay(4) ; on Frame 3 of the main time line obviously makes it immediately skip the movie on Frame 3 and jump to Frame 4.
I need to load an into and exit .swf files into my project. I have the code to load the swf but it is an animation (with sound) and it continues to loop. What I need it to do is play once then move (and stop) on the next frame of the main timeline. [code]...
View 6 RepliesI'm making a quiz-type animation, since I'm new with ActionScript I had developed my own way to make this work. I want to add like a meter that shows one out three position depending on the answer given, I had made this animation as a movieclip but now I need it to react according to the answer, so it changes on every question to do that I need to access the variables I'm using in the main time line, how can I access the the main time line variables from the movie clip? The movie clip (meter) is basically the background and the questions will change and advance on top of that movie clip so it'll change with each answer until you get the final result.
View 12 RepliesI've a movieClip called "picChange" and inside that movieClip, there is another movieClip called "picFrame" and inside that movieClip there are three movieClips called "HolderL1", "HolderL2", "HolderL3". I use these 3 movieClips to attach movieClips(questions for game) from library. I put movieClip inside movieClip to add some animation while it loads. I used following code:
for(var i:int = 0; i<3; i++) {
var pic_mc:String = "picLeft" + ranque[i];
var que_mc_class:Class = getDefinitionByName(pic_mc) as Class;
[code].....
how to return to the main time line from within my movie clip. I thought it was something like _root.gotoAndPlay(4); but all I'm getting is errors.
View 1 Repliesi read this tutorial, it is about how to control the time line of the loaded swf
[URL]
but i get this error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at main_fla::MainTimeline/frame1()
[Code]....
How do i refer back to a dynamic text box on the main stage?
View 1 RepliesI was wondering how I might pause my main time line with AS3, currently I'm using the following code for AS2 and it does exactly what I need it to do.[code]
View 3 RepliesI am trying to implement a small web site in FLash CS3, i have done first phase means i have created 4 pages Home , About us, Group of Companies, Contact us. and i am able to control the timeline like if i click on the home its going to home page and same like if i clicked on about us its going to that page its fine, those first two pages there is no transactions but the problem is, if i clikced on the group of companies here i m trying to create the movie clips and if i clicked on those movie clips then it needs to connect the concerned company web site but here i got stucked even in contact us page also there i am trying to put some more transactions but i am unable to.[code]...
View 1 RepliesI'm using Flash MX 2004 Actionscript.
I'm trying to get control of the time line using a conditional statement.
if (myVars.logged == "Logged") {
gotoAndStop(20);
}
I trace the myVars.logged variable and the trace tells me the value is Logged.
But the above statement won't go to frame 20.
so here's the function on main stage:
function slideImage(btnNum:Number)
{
trace("scrolling image");
trace(btnNum);
[Code].....
How can i acess slideImage function on the main stage. in AS2 _root.slideImage(btnNumber); would work. How Would I do this in AS3?
I have three FLV videos playing on my main time line.they are each set to auto play and the are each on individual frames.lets say frame 30-31 and 32.how do I have the video stop playing once it detects that the user clicked out of that frame?my problem is the video or I guess it's just the audio keep on playing even though I am already viewing some other page.
View 2 Repliesis there a way to reach the stage (the main time line) from ANYWHERE.In AS2 it was _root...The aim is : I want to add on stage an MC from within a class. As expected, addChild(mc) doesn't work, it adds the child to my class, not to the stage. So : is there any stage.addChild(mc) or MainTimeLine.addChild(mc) or anything like this ?The other way is to add the class on stage addChild(MyClassName).
View 12 Repliesdocument class
Code:
package pages
{
import flash.display.*;
import flash.events.*;
[Code].....
the highlighted function is what i need to be working but it isnt.. have no idea whats going on... i basically need to jump between frames on the root timeline (superMain)
I am looking for Custom Slider control the time line animation i am doing a demo presentation. The file i have uploaded is flash cs4 version need help on AS3.
View 6 RepliesSo here's the run down. I'm trying to target a timer that is declared on the main time line (frame1) from within a movieclip. So here is the code for the timer on the main timeline:
ActionScript Code:
var timer1:Timer = new Timer(1000);
timer1.addEventListener(TimerEvent.TIMER, timedFunc1);
timer1.start();
The name of the movieclip is ssRightMask_mc. I'm trying to get the currentCount from timer1, but I'm having some targeting issues. I've tried:
[Code]...
I received an AS file from an outside source and I want to understand the what MovieClip(root) is doing? I know there is a movieClip on the stage called "field" and with in it a dynamic text field called "txt" and that this text field is being tied into a css class. But I don't quite get the MovieClip(root) part.Is this just a way of saying that the text field you are targeting is on the main time line? [code]
View 9 RepliesI'm making a movie w/ no interactivity and I want to put a series of movie clips on the main time line, each to play after the previous movie clip is done. The only way I can make it work is to put the movie clips in keyframes and then allow all all the frames for the movie to play. My movie is way too long and I know there has to be a better way! I'm trying to figure out the action to assign to the keyframe that will play the movie clip within that one frame and when it's done, go on to the next movie clip.
View 1 RepliesI would think this would be pretty simple, but I don't really know anything about actionscript 3.0. Please put this into terms I can understand. Basically, I want to be able to input text in a text box and have the movie jump to another frame based on what is typed into the box after the "enter" key is pressed. For example, If you type "Frame 2" and press enter, It could go to frame 2 and stop.
Additionally, I want to beable to have it control movie clips within the frame. For example, if you type "MovieClip1 Frame 3" it could seemingly transform an individual element in the frame by making the movie clip go to and stop at it's third frame.Finally, in the case that something is typed that doesn't match up (that the movie "doesn't understand,") I would like a movie clip to switch from being invisible (frame 1 of the movie clip) to showing an error message (frame 2 of the movie clip).The idea is, I want to make a visual text-based adventure game. Like, you could type "go north" and it would go to frame 3 where there's the northern part of the village.
Using Child Navigation to load main time line.I am new to AS3 and have done pretty well but have been caught up this area.I have been loading swfs into a loader (imageLoader) which has been added to the stage using addChild. Then with buttons and functions I load other swfs into the same loader which replace each other. I now have an swf "testProject3a.swf" loaded into (imageLoader) which has icons for navigation and when each icon is clicked I need it to load another swf into (imageLoader) and replace it's self "testProject3a.swf" with "portalB.swf".I've tried adding removeChild code to the loaded swf but it removes the original (imageLoader) and the other buttons have nothing to load into.[code]
View 3 Replieshow to refer the main time line or stage from inside the class.
class sample{
function sample(){
trace(root); // its displaying as null
}
}
in actionscript 2 we use _root for this... in actionscript3 if we use root...why its not working inside the class....?
I have three FLV movie files that are places on diffrent frames on the main time line. When the viewer clicks on diffrent buttons I send them to that specific frame by go to and stop action and the flv start playing, but if they click out of that frame by pressing another button the video still plays on the background and they can hear the audio.this doesn't hap stop the video from playing by pressing thepen if they stop button on the flv player.
View 2 RepliesIn flash CS5 I want to go back to the main time line, from inside a movie clip button, so when i click the the movie clip it goes to another frame on the main time line..
View 5 Repliesi'm kema and i have a problem with the setInterval and clear Interval function with in a movieclip i created.the interval seems to still be running even though it is with in a movieclip and not on the main time line. how do i stop it from affecting the buttons on the main time line. i tried applying the clearInterval function to the button on the main time line but still no change. i would be very grateful if anybody can profer a solution to this problem,
View 1 RepliesI have a label on my root timeline called "services". I have a services button inside a movie clip. How do I access the main time line to send it over to the page services? I'm using actionscript 3. Back in the day it would have been as simple as root.gotoandplay("services")
View 5 Repliesin my class I declare a linked movie clip:
a_mc = new LinkedMC ();
trace(a_mc.testString);
and on the time line of LinkedMC: var testString = "test string"; but I can't access testString.
When the timeline reaches a certain frame, I want an swf to load into a movieclip in that particular frame. I need this to occur on level 1 as the root of the site is pre loader.
View 1 RepliesI'm doing a project that has a lot of time line animation.There are 5 buttons. Each one plays a multi-frame MovieClip containing sounds embedded in its timeline.Then there is a button that stops any of the playing movie clips. Of course, this doesn't stop the soundsormally, I'd just use...ActionScript Code:SoundMixer.SoundTransform.stopAll();Problem is, I also have non-timeline sounds that I have playing on a loop for background music, and the SoundMixer would stop the music too. But I don't want the music to stop.Doing some research, I think any MovieClip can have a SoundTransform property you can adjust, so I should be able to control the sounds just inside specific MovieClips. But I can't figure it out.
View 1 RepliesI have a time line of 1441 frames my frameRate is 24 fps so it takes 1 minute exactly to complete the timeline animation I want to Display the Remaining time as file starts I need formula to place in ENTER_FRAME event which displays the time left
View 2 Replies