I have a time line of 1441 frames my frameRate is 24 fps so it takes 1 minute exactly to complete the timeline animation I want to Display the Remaining time as file starts I need formula to place in ENTER_FRAME event which displays the time left
View 2 RepliesI have a time line of 1441 framesmy frameRate is 24 fpsso it takes 1 minute exactly to complete the timeline animationI want to Display the Remaining time as file startsI need formula to place in ENTER_FRAME event which displays the time left
View 1 RepliesWhen using the Pencil Tool in Flash CS4 the line does not appear until after I've released the left mouse button or Wacom Pen nib. In other words you can write on a blank page the letter A but it only becomes visible after releasing the mouse button. It's invisible inkThe same problem occurs on my other machine with the only difference being an Intuos compared with Intuos 4 tablet - however it has same problem with a USB mouse, so it doest appear to be a Wacom issue.I've found a (kindof) fix.Open the Wacom Tablet properties panel either from the Start Menu or Control Menu - leave it open while using the Pencil Tool in Flash CS4 and it all works fine!I would be interested to know if anyone else has the same issue - might only be relevent to Windows 7 - 64 bit (i've not tested 32 bit). All was fine in Windows XP.Windows 7 - 64 bit (2009)Flash CS4 10.0.2Wacom Driver pro612-5_int - the new driver 613 made the pen go into Quick Point mode randomly so I'm using the older 612.5 drivers.
View 16 RepliesMy issue is that for my website I want there to be movies in between the interactive parts of it where the interfaces slide in and out. However, I can't stop a movie from playing over and over instead of playing once and going to the next frame.With 2.0 I haven't been able to find any research that helps me, probably because I don't know the correct keywords to search for.Right now I have my main time line set up with a loading bar on frames 1 & 2, that then jumps to frame 3 where I have embedded a movie (Instance named: mc_start) of the interface sliding in. Preferably after that I need it to jump to frame 4 where the actual interface is.
I can get the movie to end by going into the embedded movie's time line and simply have stop() ; at the final frame, but I can't get it to go to frame 4 on the main time line. If I having something like gotoAndPlay(4) ; on the final frame of the embedded movie's time line, it simply goes to frame 4 of the embedded time line and not frame 4 of the main time line. If there was a command to make it jump back to the main time line instead of the embedded time line, that would work perfectly.Coding on Frame 3 of the main time line to jump to Frame 4 would work if I knew the correct language to detect when the movie has ended (Movie is 191 frames long), so that afterwards it would immediately jump to Frame 4, but I haven't been able to find any resources that will teach me how to do it. Right now having gotoAndPlay(4) ; on Frame 3 of the main time line obviously makes it immediately skip the movie on Frame 3 and jump to Frame 4.
What I have is a movieclip and a button in scene 1 (which is the main timeline).There is an actionscript layer also on the main timeline. what I want to do is when I click the button, it would do a nextFrame(); in the movieclip timeline instead of the main timeline.
View 4 RepliesI want to run a sound once in a timeline but want the sound to stop at the end of the first run on the timeline but want the timeline to continue to repeat without the sound running again.
View 3 RepliesI have learned from a video tutorial (Flash CS5 in the Family 23: Banner Ad Part 1)to use the F5 key to set the length of a time line of a particular image.When using the F5 key on the MAC keyboard, it will only allow for the audio to be worked with.I've tried Apple+F5, Option+F5, Ctrl+F5 etc.What am I missing?
View 1 RepliesWhen you want a window to pop up (ie: image descripstion), do you just have the content in the library , or do you actually have it in a keyframe labeled in the timeline? And what is the best script to call it , and to make it close when clicked anywhere?
View 1 RepliesI'm trying to make straight lines grow out of a stationary dot, like veins. I've tried shape tween, but it only works for shapes, not lines. I'd just get a blank workspace when I hit play. I've also tried motion tween, but I can't get the line to grow continuously to a point.
View 11 RepliesI need to adapt it so that instead of looping all the way back to the beginning, it instead goes to points further into the animation (such as say 10 seconds in) rather than all the way back to the start.[code]Now, I'm thinking that what needs to be changed is the autoRewind = true section, but being a complete novice, I don't even know where to begin. I've seen online sections dealing with a goto command, but my attempts to alter the code haven't worked correctly
View 4 Replieshow do I consolidate adobe flash arrange window area so that I can make my time line small to be able to see the whole movie with keyframes how I want to see them. there are some times I have to scrool alway the way right, how do i avoide from doing this?
Something similar to how adobes audition stretches waves is this possible to do in your timeline?
In flash CS5 I want to go back to the main time line, from inside a movie clip button, so when i click the the movie clip it goes to another frame on the main time line..
View 5 RepliesI am new at flash CS4. (Upgraded to Flash CS 5 but this gives other problems in the meantime I continue with CS4)I have created webpage. Within the web page I have created Motion Tween with Motion editor and once previewed, it works fine. Going back to the stage and previewing the result shows the initial position of the Motion tween but it doesn't move and behave the way it shoud. What's missing? Where am I going wrong?
View 9 RepliesI have a time line of 1441 frames. My frameRate is 24 fps. So it takes 1 minute exactly to complete the timeline animation. I want to Display the Remaining time as file starts. I need formula to place in ENTER_FRAME event which displays the time left.
View 1 Repliesi want to duplicate a line 4 times, and move each line on Yaxis, with a delay of 1sec each time. I know i must use setinterval+duplicateMovieClip, but i've got pbs :-( actually, i've got my AS code on my line :
[Code]...
I have been trying to create a countdown timer but i cant seem to get the time to display, the first time i tried only letters where displayed instead of the number and after playing around now I only get the :'s (between the numbers) to display and the occasion '0' appears?[code]...
View 2 RepliesI am testing files for a project and am wondering if it's possible to print out to the screen what time it was COMPILED, so I can then create a build number. I can't use get date or anything like that, becauise it will update at runtime. I need it to, once set, stay in place, so I then know exactly which version I am looking at. I could look at the dates of the files, but really need to get it on screen.
View 6 RepliesI want to calculate how much years, months, days, hours, minutes and seconds I live from my date of birth and display this in flash (like live tracking). How can I do that?
View 4 RepliesI have a text box layer on top of the talk bubble. At first it is blank, then I click on Hello Kitty and a random phrase pops up in the text box from the array I created. However, when I click her again she will not say another random phrase. I don't know what I'm doing wrong. Here is the code.
var myPhrases:Array = new Array(); // HELLO KITTY PHRASES FOR TALK BUBBLE
myPhrases[0]="My name is Hello Kitty!";
myPhrases[1]="How are you today?";
[Code]....
I have a ComboBox in Flex with about 20 items. How do I display all of them in a dropdown with no scroll bar? Right now, Flex displays 5 at a time in the dropdown and puts a scrollbar to scroll for more.Here's an example:
http:[url].........How do I make the dropdown bigger in this example so it shows all 10 items at once?
I created a game in AS3 using a tutorial written for AS2 but I can't get the timer working correctly. The game contains 3 frames, a start screen, game loop, and end screen. the timer starts on frame 2, and counts down (tested this with a trace). When the timer reaches 0 I want to go to frame 3 which is the end game screen but my code isn't working.
var fl_SecondsToCountDown:Number = 30;
var fl_CountDownTimerInstance:Timer = new Timer(1000, fl_SecondsToCountDown);
fl_CountDownTimerInstance.addEventListener(TimerEvent.TIMER, fl_CountDownTimerHandler);
fl_CountDownTimerInstance.start();
theTimer.text = String(fl_SecondsToCountDown);
[Code] .....
Im trying to make a flash music player, and im having trouble displaying the length of the track and the time played. Here is the actionscript used, all it does is give me undefined/undefined. Im using flash mx 2004 pro.
[Code]...
I completed a similar xml searchable database based on this tutorial: http:[url]....I have a rather large xml that when you do a search flash times out and the user gets a scrip error,What I want to know is how would you go about only displaying/returning only 10 records at a time?
Code:
//Arrays
String.prototype.contains = function(searchString){
return (this.toLowerCase().indexOf(searchString.toLowerCase()) != -1);[code].....
AS2 on a button symbol:
on (release) {
_root.randomVar = pie
trace (_root.randomVar)[code]..........
If I put Var = X in the time line it comes out undefined, no variables seem to be working, tried it in 2x flash projects
What I mean is, can I add a sound that will only play if there are enough frames for the sound?I want to only play on the frames that it is on, but it plays all the way through the sound file regardless of the amount of frames.
View 0 RepliesI am wanting to control the timeline of a MC using AS. What I mean is when I click on a movie click and drag right it controls the reverses the MC and when I go left it plays it (but i only want this to happen when I click and drag).
View 7 Replieshow to return to the main time line from within my movie clip. I thought it was something like _root.gotoAndPlay(4); but all I'm getting is errors.
View 1 Repliesi dragged an mp3 onto the time line and i want to be able to make it stop with the click of a button,
Code:
on (release) {
Sound.stop(["stap-1.mp3"]);
}
I have one mp3 file in the time line. How to controle set volume
View 1 RepliesI'm using this action for specific keys to simply advance the time line -
on(keyPress "<Space>"){
play();
}
what if I want to use all the keys of the keyboard to control this action ? Is the group selector to use ? Like "all keyboard" "all keys"?
I have got AS3 code to do it -
stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_KeyboardDownHandler);
function fl_KeyboardDownHandler(event:KeyboardEvent):void {
gotoAndPlay(currentFrame+1);
}
But wanted it for AS2 ?