I want to run a sound once in a timeline but want the sound to stop at the end of the first run on the timeline but want the timeline to continue to repeat without the sound running again.
View 3 RepliesI have one mp3 file in the time line. How to controle set volume
View 1 RepliesI have a time line of 1441 frames my frameRate is 24 fps so it takes 1 minute exactly to complete the timeline animation I want to Display the Remaining time as file starts I need formula to place in ENTER_FRAME event which displays the time left
View 2 RepliesMy issue is that for my website I want there to be movies in between the interactive parts of it where the interfaces slide in and out. However, I can't stop a movie from playing over and over instead of playing once and going to the next frame.With 2.0 I haven't been able to find any research that helps me, probably because I don't know the correct keywords to search for.Right now I have my main time line set up with a loading bar on frames 1 & 2, that then jumps to frame 3 where I have embedded a movie (Instance named: mc_start) of the interface sliding in. Preferably after that I need it to jump to frame 4 where the actual interface is.
I can get the movie to end by going into the embedded movie's time line and simply have stop() ; at the final frame, but I can't get it to go to frame 4 on the main time line. If I having something like gotoAndPlay(4) ; on the final frame of the embedded movie's time line, it simply goes to frame 4 of the embedded time line and not frame 4 of the main time line. If there was a command to make it jump back to the main time line instead of the embedded time line, that would work perfectly.Coding on Frame 3 of the main time line to jump to Frame 4 would work if I knew the correct language to detect when the movie has ended (Movie is 191 frames long), so that afterwards it would immediately jump to Frame 4, but I haven't been able to find any resources that will teach me how to do it. Right now having gotoAndPlay(4) ; on Frame 3 of the main time line obviously makes it immediately skip the movie on Frame 3 and jump to Frame 4.
What I have is a movieclip and a button in scene 1 (which is the main timeline).There is an actionscript layer also on the main timeline. what I want to do is when I click the button, it would do a nextFrame(); in the movieclip timeline instead of the main timeline.
View 4 RepliesI have learned from a video tutorial (Flash CS5 in the Family 23: Banner Ad Part 1)to use the F5 key to set the length of a time line of a particular image.When using the F5 key on the MAC keyboard, it will only allow for the audio to be worked with.I've tried Apple+F5, Option+F5, Ctrl+F5 etc.What am I missing?
View 1 RepliesWhen you want a window to pop up (ie: image descripstion), do you just have the content in the library , or do you actually have it in a keyframe labeled in the timeline? And what is the best script to call it , and to make it close when clicked anywhere?
View 1 RepliesI'm trying to make straight lines grow out of a stationary dot, like veins. I've tried shape tween, but it only works for shapes, not lines. I'd just get a blank workspace when I hit play. I've also tried motion tween, but I can't get the line to grow continuously to a point.
View 11 RepliesI need to adapt it so that instead of looping all the way back to the beginning, it instead goes to points further into the animation (such as say 10 seconds in) rather than all the way back to the start.[code]Now, I'm thinking that what needs to be changed is the autoRewind = true section, but being a complete novice, I don't even know where to begin. I've seen online sections dealing with a goto command, but my attempts to alter the code haven't worked correctly
View 4 Replieshow do I consolidate adobe flash arrange window area so that I can make my time line small to be able to see the whole movie with keyframes how I want to see them. there are some times I have to scrool alway the way right, how do i avoide from doing this?
Something similar to how adobes audition stretches waves is this possible to do in your timeline?
When using the Pencil Tool in Flash CS4 the line does not appear until after I've released the left mouse button or Wacom Pen nib. In other words you can write on a blank page the letter A but it only becomes visible after releasing the mouse button. It's invisible inkThe same problem occurs on my other machine with the only difference being an Intuos compared with Intuos 4 tablet - however it has same problem with a USB mouse, so it doest appear to be a Wacom issue.I've found a (kindof) fix.Open the Wacom Tablet properties panel either from the Start Menu or Control Menu - leave it open while using the Pencil Tool in Flash CS4 and it all works fine!I would be interested to know if anyone else has the same issue - might only be relevent to Windows 7 - 64 bit (i've not tested 32 bit). All was fine in Windows XP.Windows 7 - 64 bit (2009)Flash CS4 10.0.2Wacom Driver pro612-5_int - the new driver 613 made the pen go into Quick Point mode randomly so I'm using the older 612.5 drivers.
View 16 RepliesIn flash CS5 I want to go back to the main time line, from inside a movie clip button, so when i click the the movie clip it goes to another frame on the main time line..
View 5 RepliesI am new at flash CS4. (Upgraded to Flash CS 5 but this gives other problems in the meantime I continue with CS4)I have created webpage. Within the web page I have created Motion Tween with Motion editor and once previewed, it works fine. Going back to the stage and previewing the result shows the initial position of the Motion tween but it doesn't move and behave the way it shoud. What's missing? Where am I going wrong?
View 9 RepliesI am using Flash CS4. To illustrate, I created a new flash file and added a short tick sound to the library. I set the properties of the sound to export to Actionscript and named the class "overSound". I added a Movieclip object to the stage to represent a button and gave it an instance name of "overButton". On frame 1 of the main timeline I added the following code:
[Code]...
I have a time line of 1441 framesmy frameRate is 24 fpsso it takes 1 minute exactly to complete the timeline animationI want to Display the Remaining time as file startsI need formula to place in ENTER_FRAME event which displays the time left
View 1 Repliesi want to duplicate a line 4 times, and move each line on Yaxis, with a delay of 1sec each time. I know i must use setinterval+duplicateMovieClip, but i've got pbs :-( actually, i've got my AS code on my line :
[Code]...
It appears my sound is off sync and the longer I play the movieclip, the farther off sync it goes. Its nothing too complicated, just some basic shooting sounds that fire every time I hit the space bar. My code is below:
package com.objects{
import flash.display.MovieClip;
import flash.media.Sound;
import flash.media.SoundChannel;[code]....
The Attack() method gets called from another class that handles all keyboard controls.when it gets called the sound then plays.firesound and firesound2 are almost the same. firesound2 sounds a little off pitch to make it sound more realistic.At first the sound sounds pretty good, not great. but then it gets terrible as time passes.
I made a new .fla project. and I attached the following class to it by it self. so the following is the only code in the entire .fla project and the issue still occurs. I press the spacebar and the sound starts a day late.
package {
import flash.display.MovieClip;
import flash.events.*;[code]......
in Flash CS4 I have static text like: Line1 and line2 It's in 9 point Arial Regular as a device font. If I set the line spacing below 3.9 the second line dissappears from the compiled SWF file. It still shows in the FLA file. The same thing happens at 6pt but NOT at 5pt or less.
View 1 RepliesAS2 on a button symbol:
on (release) {
_root.randomVar = pie
trace (_root.randomVar)[code]..........
If I put Var = X in the time line it comes out undefined, no variables seem to be working, tried it in 2x flash projects
What I mean is, can I add a sound that will only play if there are enough frames for the sound?I want to only play on the frames that it is on, but it plays all the way through the sound file regardless of the amount of frames.
View 0 RepliesI am wanting to control the timeline of a MC using AS. What I mean is when I click on a movie click and drag right it controls the reverses the MC and when I go left it plays it (but i only want this to happen when I click and drag).
View 7 Replieshow to return to the main time line from within my movie clip. I thought it was something like _root.gotoAndPlay(4); but all I'm getting is errors.
View 1 Repliesi dragged an mp3 onto the time line and i want to be able to make it stop with the click of a button,
Code:
on (release) {
Sound.stop(["stap-1.mp3"]);
}
I am trying to record the sound of my device connected to Line-In via ActionScript 3.
According to adobe docs [URL], The Microphone class lets your application connect to a microphone or other sound input device on the user's system .
But the Microphone class detects only microphones on my sound card ( Microphone.names array ) , not the "other sound input devices". Maybe there is another way to capture sound from Line-In devices?
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.
I'm using this action for specific keys to simply advance the time line -
on(keyPress "<Space>"){
play();
}
what if I want to use all the keys of the keyboard to control this action ? Is the group selector to use ? Like "all keyboard" "all keys"?
I have got AS3 code to do it -
stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_KeyboardDownHandler);
function fl_KeyboardDownHandler(event:KeyboardEvent):void {
gotoAndPlay(currentFrame+1);
}
But wanted it for AS2 ?
I am trying to link a button via AS but I need to use a function that is on a different time line for it to work. I have no idea how I am going to do.
[Code]...
I am trying to use the "var flvControl" but that function is located on a different timeline.
I am building a Flash continuous play application for a company to use in a booth presentation at a sales show. In effect, it will be a more engaging Powerpoint presentation. Each slide will be a be a frame that will call an external swf into movie clip with the animation of text or fade in images in the external swf. Each external swf will stay on for about 10 seconds. I am looking for an action script that will first stop the advancement at each frame for 10 seconds (ability to edit seconds needed) and then move to the next frame and stop for 10 seconds then the next and so on and so on and at the end, start back at frame 1.
View 1 RepliesI am making a small project and i want to know how to get flash to change from one time line to the next , i am thinking of using an if statement to check if an object had passed the top of the stage and if that condition is true then i want it to go to the next layer on a different frame to play another animation?
View 4 RepliesI want to write a function on timeline whose arguments I want code to read from a xml file.
View 2 Replies