i want to duplicate a line 4 times, and move each line on Yaxis, with a delay of 1sec each time. I know i must use setinterval+duplicateMovieClip, but i've got pbs :-( actually, i've got my AS code on my line :
[Code]...
My issue is that for my website I want there to be movies in between the interactive parts of it where the interfaces slide in and out. However, I can't stop a movie from playing over and over instead of playing once and going to the next frame.With 2.0 I haven't been able to find any research that helps me, probably because I don't know the correct keywords to search for.Right now I have my main time line set up with a loading bar on frames 1 & 2, that then jumps to frame 3 where I have embedded a movie (Instance named: mc_start) of the interface sliding in. Preferably after that I need it to jump to frame 4 where the actual interface is.
I can get the movie to end by going into the embedded movie's time line and simply have stop() ; at the final frame, but I can't get it to go to frame 4 on the main time line. If I having something like gotoAndPlay(4) ; on the final frame of the embedded movie's time line, it simply goes to frame 4 of the embedded time line and not frame 4 of the main time line. If there was a command to make it jump back to the main time line instead of the embedded time line, that would work perfectly.Coding on Frame 3 of the main time line to jump to Frame 4 would work if I knew the correct language to detect when the movie has ended (Movie is 191 frames long), so that afterwards it would immediately jump to Frame 4, but I haven't been able to find any resources that will teach me how to do it. Right now having gotoAndPlay(4) ; on Frame 3 of the main time line obviously makes it immediately skip the movie on Frame 3 and jump to Frame 4.
What I have is a movieclip and a button in scene 1 (which is the main timeline).There is an actionscript layer also on the main timeline. what I want to do is when I click the button, it would do a nextFrame(); in the movieclip timeline instead of the main timeline.
View 4 RepliesI'm making an interactive website using ActionScript 3 and no matter what I try and do I keep getting the following error messages:
Characters, Layer 'actions', Frame 2, Line 5 1021: Duplicate function definition.
Characters, Layer 'actions', Frame 2, Line 12 1021: Duplicate function definition .Characters, Layer 'actions', Frame 2, Line 19 1021: Duplicate function definition.
I don't really understand what I'm doing wrong because it says "duplicate function" yet they aren't the same functions. Here is the ActionScript I've used for the first page:
stop();home.addEventListener(MouseEvent.CLICK, goHome);function goHome(evt:MouseEvent):void{ gotoAndPlay("Home", 1)}characters.addEventListener(MouseEvent.CLICK, goCharacters);function[code]....
I am trying to dispatch an event but not sure when I should do it to get the right results. The first event "submitClicked" is in the right spot and works great. However, the second event "dataReady" seems like it might be a problem. I need it to be dispatched after this.compiledFormData is set.Does AS3 wait for each line of code in a function to be executed before moving on to the next line?
// --------------------------------------------------------------------
public function submitForm()
{
[code].....
I am trying to link a button via AS but I need to use a function that is on a different time line for it to work. I have no idea how I am going to do.
[Code]...
I am trying to use the "var flvControl" but that function is located on a different timeline.
i have an xml file and i want my code in flash to read it line by line but its only showing the first line out of 5 lines.Below is the code:
var NigeriaNumber:Number;
var stateName:String;
var year:String;
[code].....
i need a function or a property that returned the current value of the time line
View 1 Repliesi need a function or a property that returned the current value of the time line
View 1 Replieshow can i call function inside movieclip in library panel it is not on time line
View 2 Replieshow to create something like that? With all the subMCs that were attached dynamically, and variables and so on..
View 1 RepliesIm building a pretty simple drawing board in flash, i got this code from this forum and it works fine (there is more to it but this is the drawing part)[code]This works fine. But i want to be able to erase the drawings, step by step this is ths tricky part, ive looked everywhere(ok not everywhere) but in a whole lot of places but the only thing i found is how i could delete everything with removeChild and that in not what i want. Maybe i need to change the function abowe? Please help me to get in the right direction. What should i read about /look at?
View 5 Repliesdelay the duplication a certian X time. so, say my MC is a tween that goes for 50 frames.. I would like it to duplicate itself at the end of the 50 frames. Also, at the end of the 50 frames I would like to unload the MC underneath the 1st MC. I know sounds complicated. but simple idea. 1 MC, duplicates itself over top on the first, and then unloads the 1st MC.
View 14 RepliesI was looking at the duplicate movie tutorial and was wondering if there is a way to delay the duplication a certian X time. So, say my MC is a tween that goes for 50 frames. I would like it to duplicate itself at the end of the 50 frames. Also, at the end of the 50 frames I would like to unload the MC underneath the 1st MC. I know sounds complicated. but simple idea. 1 MC, duplicates itself over top on the first, and then unloads the 1st MC.
View 14 RepliesI have a movieclip called myButton,inside of myButton i have a textfield called buttonLabel. I have 16 instances of myButton placed on the stage with instancenames myButton1,myButton2, etc.I want the textfield inside of each button to display the same number as the one in their instance name. ie myButton1.buttonLabel.text = "1".instead of repeating that line of code 16 times, is there a way i can use a loop? something like
for (var i:int = 1; i < 17; i++)
{
myButton(i).buttonLabel.text = i
}
how can i make a function example() be repeated 5 times with a delay of 3 seconds in between?
View 8 Repliesi have a slideshow with a delay of for example 3 seconds, and a preloader which is a line with a 100px final length.i start preloading next image.now if the time until next image loads is longer than slideshow delay, i will show next image as soon as it loads.if the time until next image loads is shorter that than slideshow delay, i want to wait additional time until delay and then show the image.the problem is how do i represent smooth line width grow (being enter frame or tween) by calculating/comparing 2 values together (delay and loader percent, which goes from 0 - 100) ?if my line growth represent just a slideshow delay, then when it gets to an end, if next image still hasnt loaded, then it wont look good if line has come to an end, but i still have to wait.
View 4 RepliesI have a time line of 1441 frames my frameRate is 24 fps so it takes 1 minute exactly to complete the timeline animation I want to Display the Remaining time as file starts I need formula to place in ENTER_FRAME event which displays the time left
View 2 RepliesI have a time line of 1441 framesmy frameRate is 24 fpsso it takes 1 minute exactly to complete the timeline animationI want to Display the Remaining time as file startsI need formula to place in ENTER_FRAME event which displays the time left
View 1 RepliesI'm trying to work out how to create a simple demo that works as follows: A ball falls from the top of the stage.Player is able to draw a line anywhere on the stage. The ball will bounce/roll along the line such that the player can guide it at will. I don't think the coordinate rotation will be a problem for me but I can't figure out how to transform a line drawn by the player into a hit detectable sprite -- or realkly any way that I can get those line coordinates into my coordinate rotation routine. To keep it simple, I'm just working on the first part of the problem, getting the line to where I can hit test or know its position.Here is my code so far:
package
{
import flash.display.Sprite;
import flash.events.MouseEvent;[code]........
It always traces 0,0 instead of my current line coordinates - and even those I don't think would be sufficient.
in Flash CS4 I have static text like: Line1 and line2 It's in 9 point Arial Regular as a device font. If I set the line spacing below 3.9 the second line dissappears from the compiled SWF file. It still shows in the FLA file. The same thing happens at 6pt but NOT at 5pt or less.
View 1 RepliesIs it possible to load a text file using line breaks as a delimeter rather than having a &var= at the beginning of each line? Like by a for instance? I have a text file with about 1000 lines that I need to load/display.
View 5 RepliesI'm in the process of teaching myself the components of the CS4 Design Premium package using the Adobe Classroom in a Book series. I'm currently going through the Flash CIAB and i've started using the pen tool. The task involves creating a wave like design across the stage. Whilst this in itself is simple, the final instruction is to click on the first anchor point to close the shape. In the illustration, the closed shape seems to automatically extend around the stage, however when I click on the first anchor point, the line automatically connects between the two points in a straight line.
Am I doing something wrong? The next step is to fill this area, but with the straight line effect that I am getting, this becomes impossible. I should point out that the instruction states that the pen tool line should extend off the stage. I have done this, but even then on clicking on the first anchor point the shape is closed incorrectly.
I am using Flex 4 and AS3 and I am trying to make it so that the user can draw a freehand line with the cursor - I have this part done.However, I also need the line to be a dashed line instead of one solid line like it is now. below is my code I am using. I have found some examples on how to do this, but they are all for straight lines, not for a freehand line.
Class File (DrawingArea):
package
{
import flash.display.BitmapData;
import flash.events.Event;
import flash.events.MouseEvent;
[code]....
When a Dynamic Multiple line text field is used in Flash CS3, it has a very annoying feature that auto inserts a line break at the end of inserted text. It also auto inserts a line break if no text is entered too.
I'm having a problem with this because the text is being saved from flash to a text file on the desktop. With every multi-line text field there's a nasty looking line break.
Any way of "turning off" this auto-line-break-at-the-end feature?
I need to replace multiple contiguous new line/line feed characters in flex with a single new line character.
Example:
The string
"My name is blah blah
My name is blah
"
Should be converted to
"My name is blah blah
My name is blah
"
Hope the example makes it easier to understand.
I am using a component to render it.
I guess using regex would be the easiest way to do this, but still it would be great if people can point me out to references/examples to get this done with ease.
I am using flex 4.5.
I am developing a white board application which allows the user to draw line with arrow head (some like Microsoft Word line with arrow feature). I am using graphics property along with lineTo() method to draw a line. Now i have to draw a angular arrow on the last point of line. I am drawing the arrow by connecting the points around last points. As 360 line can pass through this point and each line can have a different angle of arrow.
View 1 Repliesdraw a line on mouse movement, not the static line.
I am attaching a sample which is 90 degree bounded as it has been given in animation, I want to make this or such type through mouse movement.
I'm trying to produce a game that on mouse down a dotted line (or just a line) gets dragged out following the mouse until it is realized then it disappears.
View 1 RepliesI'm attempting to add line breaks after the code I've included below. I know that I need to add a " " after the line of text, but I haven't had any success.
textField.appendText(""+ bldg.S11[i].Title.text())textField.appendText("Square Footage: "+ bldg.S11[i].SF.text())textField.appendText("Tenant: "+ bldg.S11[i].Tenant.text())textField.appendText("Status: "+ bldg.S11[i].Status.text())