ActionScript 3.0 :: Display A Text Or Make A Sound?
Aug 23, 2011
In case, we are talking about playing cards, and it happens that all the cards, I mean the 3 cards are aces, or tens or kings,and in this situation, I want to display a text or make a sound; The part with the sound or the text is easy for me; I have no problem with that.I know intuitively that I have to make a condition which is the following:
If card1==card2==card3== ace I am going to beep or write something.
As I said, the beeping part, or the writing, I can manage.My problem is the if condition and the card1, card2, card3. Where in the world are they ?Do I have to open the array ? var imageA:Array = ["1.jpg............................10.jpg];Right now, there is a good movie on THIS channel,& believe you me I am making a big sacrifice by trying to stimulate my remaining few neurones.
var imageA:Array = [];
var loader1:Loader=new Loader();
addChild(loader1);[code].....
View 19 Replies
Similar Posts:
Dec 2, 2009
hey i need to figure out how to make a text field that will display text with else/if functions, basically on my program with a certain output i want a certain phrase to appear depending on which output. how would i go about doing this?
View 1 Replies
Apr 1, 2009
Usually a song name in music players, like in Winamp for example, song name scrolls from right to left. The only way I can think of is to have 2 dynamic textfields, both having the same text, one next to each other (with desired spacing in between), and then in enter frame or with timer move them both (below the mask) from one side to another, and when each textfiled crossed certain point, move it behind the other and repeat this action forever...
View 2 Replies
Jan 25, 2011
Ok I have a bunch of movie clips that the player can interact with. And i also have a text field that I would like to show the names of those different movie clips as they are being interacted with. For example if the player clicks on a apple mc the text field will display the word apple. here is the code that i have tried
var myText:TextField = new TextField();
function readOut(event:MouseEvent):void {
myText.text:readOut.currentTarget;
addChild(myText);
}
View 9 Replies
Mar 14, 2011
I have a project that requires me to display the waveform for a uploaded sound. The sound is always an MP3, most of the time 22.05 kHz mono, with speech only. The project are written with Flex/ActionScript 3. It's meant to run in the browser, but might also consider converting to AIR if that can help.
All examples I've found and looked at for generating a wave, are either doing some visualization in real time as the sound is playing, or, the most promising, as3soundeditorlib, keeps the wave already generated, but does it very slowly, seemingly using as long time as playing through the audio would've taken.Is there any way to generate the wave faster than real time?
View 2 Replies
Jan 25, 2012
I've created some variables. I've created a string using those variables. I want to display the value of that string in a text box.
ActionScript Code:
var today_date:Date = new Date();
var thismonth:uint = today_date.getMonth();
var mnth:Array = new
[Code].....
View 3 Replies
Feb 18, 2012
found that code to display html format text to dynamic textfield in as3:
var url:String = "http://edeejay.dyndns.org:8000/currentsong?sid=1";
var loadit:URLLoader = new URLLoader();
loadit.addEventListener(Event.COMPLETE, completeHandler);
[code].....
View 1 Replies
Mar 23, 2010
I have combed the Web and I can't seem to find the answer. All I want to do is display some html-formatted text, located within an external XML file, in a dynamic text field in Flash CS3.
I don't have any code to supply because at this point the only thing I'm trying to display in the text field is "<b>This</b> is a <a href="http://www.google.com">test</a>." For this hypothetical example, I could call the text field myTextField. I just need to know how to format the AS3 code to get the XML to display inside myTextField.
View 7 Replies
Jul 28, 2009
I have several buttons in a movie and I want to be able to rollover an individual button and play the sound for that button and when I rolloff I want the sound for that button to stop.
View 6 Replies
May 18, 2007
I use Flash MX 6.0
1) I have a button and when I put cursor over it, it must start looping a sound. When I drag away, the sound must stop. I would be even cooler if it was possible to make the sound fade away when the mouse is rolled away. I have no problem creating another sound file that fades my current sound away.
2) I have a button which represents a knife, that should stab something (a panel) once pressed. So fist the knife must be clean. but after one or more presses, the blood should remain as a movie clip (as I want to animate the dripping blood)
3) once rolled over a button, the sound must start looping (as I wrote in 1.) AND the knife should slowly go backwards (MC). BUT when I roll mouse away, the sound fades away (as in 1. again) PLUS the knife should slowly move back to its place in stead of just jump from one place to another.
View 1 Replies
Jul 15, 2009
i want to intertwine php, MySql and flash. so i can make a flash movie display text that is in the sql database and a php script to change the database, php > sql = i can do but sql > flash = i can't do..i want it so the sql data show's in a text box in the flash movie...
View 1 Replies
Jan 21, 2010
How to import sound with AS? Cuz i have tried it and my sound just wount play. Can you explain me where my sound should be and what is the as code for importing cuz i use
mysound = new Sound();
mysound.attachSound("SoundOn");
mysound.start();
and this SoundON from where i get it, i try to add linkage to the sound file but in CS4 i cant find the option;. I do it from the library, adding text into the linkage field but still my sound doesn't want to play?
View 15 Replies
Oct 21, 2009
I am a complete rookie in ActionScript2.0/Flash.I just started learning regarding a project. My problem is I want to display data from MySQL in a DropDown Menu in Flash. the SendAndRecieve functionality only aids us to receive any responses,right?(Please correct me If I am Wrong.
View 2 Replies
Aug 5, 2010
Need to make a character start to talk when the sound starts and stop talk when the sound stops so I'm using this:
[Code]...
View 2 Replies
Dec 7, 2009
I have a nested movie clip which has the code written in one frame on a single layer.I want to incorporate a Slider to control the volume.Created a layer on top of the action script and pulled the slider on that layer at the stage.Added the code etc to the instance name of the slider but when the movie clips start playing( it is a dynamic slide show) they conceal the sliderHow do I make the slider visible on top of the images.Or shall I reverse the process i.e. build the slider on the main timeline. But then how do I assess the instance name from the Main TimeLine in the nested movie clip.
View 4 Replies
Nov 2, 2003
I'm building a simple audioplayer. In frame 1 I have:
Code:
mySound = new Sound();
songs = new Array("1.mp3", "2.mp3");
songIndex = 0;
mySound.loadSound(this.songs[songIndex], true);
mySound.start();
var playing = true;
[Code] .....
So, the sound begins to play from the beginning. However the problem is with the timer: when 'stop' is pressed it says 0:00. But, when I press play again it immediately jumps to the time it showed when stop was pushed, e.g. 0:12
View 14 Replies
May 1, 2005
I was wondering if anyone had any ideas on how to create sumthing like this (see attached) that actually moves with the music and not just in a premade pattern like mine
View 1 Replies
Oct 29, 2009
How can i draw sound spectrum inside a display container other than stage?I tried to display it inside the rectangle movieclip but end up in failure.[code]...
View 2 Replies
May 8, 2009
I have a text field component that I am dynamically populating with text. The words appear one letter at a time in a teleprinter style fashion. I also have rendered certain words with HTML to make style changes within the text.Now all this works fine, except because the HTML text is larger than the body of the other text, I am losing theteleprintereffect at the bottom of the text field. In other words, after a set amount has been printed, users are not seeing the letters printed out one at a time, but instead just get a printed line of text appear from beneath the visible section of the text window.
View 2 Replies
Feb 19, 2010
Is there a way to detect if a dynamic text field that has basic english characters embedded can't display some foreign text, japanese for example?
So I can then switch the text to display in an arial device font text field.
Sorry if this has been answered b4, but I can't find it if it has.
View 0 Replies
Dec 15, 2010
I embed image in html text field like [code]...
The problem is that text is being wrapped around an image. How can I get the text to be displayed under the inserted image?
View 1 Replies
Nov 6, 2009
There's a movieclip, lets call it myMovieClip. Inside this movieclip there is a dynamic text box, lets call this one myText. Now to change the text within this text box that is embedded in a movieclip, it's simply:
[Code]....
However, what if there is a variable, called myVariable that stores the instance name of the text box. With only one text box I know it's pointless, but for the sake of example, lets leave it simple. So, suddenly the code looks like:
[Code]....
View 2 Replies
Sep 1, 2007
I have a text inside a xml file and i would like to display this text in a dynamic text field, using the xmlConnector.The files are at the following address:[url]............
View 1 Replies
Nov 5, 2010
Is it possible to display Hebrew text in a normal Static Text field. If so how can I proceed.
View 0 Replies
Nov 2, 2011
I have a dynamic textfield being populated with an xml files' content. I then have a css stylesheet loaded into format the text. This all works great, but what doesn't work is the ability to bold some of the words in that text. I have both the regular and bold versions of the font embedded into the swf, I can test out just a bold block of text and it works fine. The css is also working as it will change the size of the text that I tell it to. Everything is working, but for some reason I am not able to get the bolder version of the font to display in the same text box as the regular one. I have also tried to change fonts but had the same outcome.
View 2 Replies
Mar 21, 2012
We are in the process of developing a CRM application and for that we need to upload *.doc and *.docx files and display that contents.
We successfully uploaded the *.doc and *.docx files in application by using FileReference and FileReferenceList. Would you please tell me some idea to read the contents from *.doc and *.docx files and to display the uploaded file content into flex text area.
View 1 Replies
Feb 24, 2011
I know this is similar to an already asked question, but I would love to get some more detailed help on how the outcome was achieved. I have a website with SWF animations of automotive systems. Each animation has labels naming the parts, action buttons to show failures, and links to other animations. The text for each label is dynamic, with the label being pulled from an XML file. We allow the user the option of changing the language, and currently have successfully used English/French/Spanish (all left to right) and Hebrew (right to left).
We are trying to add Traditional Chinese for a user in Taiwan, and are having difficulty getting the characters to display. We can make it work if we embed the font file into the SWF, but the file size increases to a point that it is not practical to do. I want to use the "Device Font" option, so that we can enter the Chinese text into our XML file, and then the SWF will use the font file from the end users computer to display the characters, but if I change the text property to "Device Font" it makes all the label text in the boxes disappear, no matter what language I select. If I leave the box set to "Anti-alias", the other languages display correctly.
The XML file contains this for the Chinese language label:
and this for the English Language label: The encoding of the XML file is UTF-8.
Is there something I am forgetting to do?
View 1 Replies
Oct 10, 2011
I am trying to show input text to another text field on run time. I want to show the myOutputBox with in a movie clip. The code is below:
Actionscript 3
package
{
import flash.display.Sprite;
import flash.display.Stage;
[Code]....
View 1 Replies
Jun 1, 2011
I have the following code for a frame. When I roll over the movie clip only the following text is displayed:
ic xterna Apps
I want Click External Apps to display.
import flash.events.MouseEvent;
mcHint.visible = false;
stop();
[code]....
View 3 Replies
Jun 18, 2011
I am loading an xml file in my SWF file containing some utf text like:
I want to display the encoded text in my text-field.
View 1 Replies
