I am loading mp3 files from php into Flash based on when a user clicks a link of audio files to listen too. I would like for the audio to start fading out 10 seconds before it finishes.how I can determine when a song will end and create a timer around this.
View 3 RepliesI am dynamically loading images into a blank movie file. I would like if the images fade in as they load. Remark, I am not using a slide show effect. All i would like to do is load image and make it fade in. When the user clicks to go to the next frame the image should fade out. How to do this?
View 9 RepliesI have a question about it 1.Does it use less memory than streaming it or using it as an event?2.How is it done? my music in my library has these actionscript links "song1" "song2" etc...
View 1 RepliesHow can I get this flash file to import this audio file and be able to pause and reset the audio?The file I have I was able to get it to play but I can not pause it, it just re-sets it.I also can not figure out how to get a progress bar to match the audios progress.Has anyone done this befor or have a fla with code I can look at and revers enginere? URL...
View 2 RepliesI have several flash swf's that are about 10 - 20 min. each. I load these in a player that I have created as the user selects them from a menu in the main swf (a swf player basically). I can pause start and stop the swf's with no problem, but I can't seem to get a handle on controlling the audio. I have the audio in the loaded swf's timelines because I need to sync the audio with the animation taking place in those swfs. I could, take the audio out of the timeline (after syncing it), and then load it separately, but it would be much cleaner for me to just have it in the timeline.
I've resorted to the SoundMixer of the main swf to mute and change the volume, but I can't get hold of the Sound(), soundTransforms etc. of the loaded swf. To assign a play location for the soundChannel I need to access the loaded swf's Sound().Play() function, but I can't seem to do that. I have exported the timeline audio in it's actionscript, supplied a name (same as it's class name), and then tried to access it, but I can't seem to do it (yes I wrap the loaded.content variable in a MovieClip cast--that's how I can control the pause and play of the animation). Tutorials I have found only seem to work with sounds loaded into variables, and none refer accessing timeline sounds in a loaded swf.
I have navigation panel that basically controls which swf to play on my stage. Every swf file that I have has audio in it. As soon as I have jumped to the second swf (or 3rd,4th, 5th....) , the audio from the previous overlaps the next.
var Xpos:Number = 200;
var Ypos:Number = 0;
var swf:MovieClip;
var loader:Loader = new Loader();
[code]....
I have scene that loops over and over if the user clicks on the wrong button. The audio is loaded at about half way through the scene.when the scene loops around again, and the user clicks the right button I want the audio to stop. BUT it doesn't and I'm using the same code as I've used before (it works normally)Is it becuase the second time round, at the time the user clicks the button the audio hasn't actually loaded and started playing. All you're listening to is what's left playing from the first loop?
View 3 RepliesIf I import an FLV video is there any way to remove the audio, put the audio into a byte array, and then re-add the audio to the flv video?
View 1 RepliesI'm building a project that dynamically loads external images and audio into it.The images in the external folder are numbered sequentially in the order they display as you click through them (1.jpg, 2.jpg, 3.jpg, etc). No problem.There is audio that is supposed to fade in a play with certain images. (1.mp3 fades in when 1.jpg is displayed.). No problem.Here's where it gets tricky... At least for me.Not every jpg has an audio file associated with it. The last audio that was triggered needs to keep playing until another jpg with cooresponding audio file plays, at which point the two audio files need to smoothly crossfade.1.jpg displayed => 1.mp3 fades in and plays.
(user clicks)
2.jpg displayed => 1.mp3 crossfades to 2.mp3.
(user clicks)
[code]........
I have a voice over that I am trying to load, and sync with on screen animations. So when the narrator says something the animations back it up. However, when I embed the audio clip in the timeline, it makes my whole flash movie slow to a crawl, and everything gets out of sync anyway. When I load it externally using AS3 like this:
ActionScript Code:
var my_sound:VoiceOver = new VoiceOver();
var channel:SoundChannel = my_sound.play();
Everthing works great, but I don't know how to sync it with my movieClip that contains my animations. Is there a way to have the external audio sync with a movieClip on the timeline?
I've currently got a flash site written in AS3, into which i'm loading an AS2 SWF that plays audio.The AS2 SWF is loaded into a container movieclip at Frame 10, when a specific navigation button is pressed, the playhead advances to this frame, and calls the SWF. When the user navigates away from this frame, SoundMixer.stopAll(); is called to kill the audio from the loaded AS2 SWF.
This works fine inside of Flash however, when deployed to the browser, the audio playing in the loaded AS2 SWF carries on playing.I've tried loading a new blank SWF in it's place to kill the audio, as well as a blank SWF with stopAll(), all of these solutions work within the Flash IDE (CS4) however the audio always persists in the browser.
Code:
var swfLoader:Loader = new Loader();
holderMC.addChild(swfLoader);
var bgURL:URLRequest = new URLRequest("ytPlayer.swf");
[code]....
I have 3 buttons (and 3 .swf videos).Each button makes the main timeline go to a specific frame and stop.Each Frame tells the UILoader to load a different assigned .swf video (source parameter).
Problem: when playing the project's .swf in the Flash Player, "VISUALLY" the videos properly switch,but the Audio continues, so the Audio for all 3 videos are playing simultaneously.How do I get the current video's Audio to stop when the new video is loaded ?I experimented with enabled = false;"(and other methods) between the changing videos .
switch(eventMLR.target.name) ...
case "myVideo1MLR_btn":
for (k= 0; k < sndArrayMLR.length; k++){[code]..........
loaded an external swf (with audio) in a conteiner swf.
From the cointeiner I want to controll audio pause/resume.
I know the procedure to do this with a mp3 file, but I can't intercept the sound channel of my child swf...
this should be the code to obtain the sound position:
var soundChannel:SoundChannel = new SoundChannel();
var sound:Sound = new Sound(new URLRequest("SOUND.mp3"));
soundChannel = sound.play();
pausePoint = soundChannel.position;
But I haven't the mp3 path.... My mp3 is embedded into swf child. And I can't put actionscript function in child, because is haven't source fla.
Is it possible to access a video's audio tracks when playing an flv, mp4, m4v, etc? I am trying to build a player where I can switch between different language tracks but can't find how to access this property.I am using the FLVPlayback component:
ActionScript Code:
mPlayer = new FLVPlayback();
mPlayer.width = 957;
[code]....
I have a custom player that loads several swf files and plays them one at a time (like a slideshow). It uses a preloader class that loads these external clips into an array, then begins to play the first one. The user may navigate forward or back, or pause.The problem: one swf, meant to play toward the end of the show, has audio that starts automatically a few seconds after any slide startscontainer clip is used to hold and play each loaded clip in the array, one after the other - however, to restate, the problem slide has audio that starts for no apparent reason when any clip is played. The audio for the problem slide starts at the beginning of that slide, but, when playing other slides, it starts a few seconds after they begin.
View 1 RepliesI've developed an application which uses a (dynamic) XML file to load in several files; a maximum of four MP3 files and a number of JPG files.When everything has finished loading, the user can press a "Play" button. The application could be described as a "mixer"; it's used to give online music lessons and to facilitate this, the sheet music is loaded (cut up into into several JPGs) which move horizontally on the screen like a marquee, while the music it represents begins playback. The music exists of several MP3s so that the user can mute (e.g.) the vocals or the drums, allowing him to focus on (e.g.) the guitar.
So what's going wrong, is that the audio files are not playing in sync. They are all pre-loaded so any delay between files shouldn't be sought in the files not being fully loaded yet. For initiating playback in the application, I'm using a simple function with a for loop in it, which sets each instance of my sound class to start playing at position 0 of its timeline (I've added in highlighting for all of the "code" blocks in my post, to keep everything easy to read through):
Code:
function playSounds():void {
for (var iCnt:Number = 0; iCnt < aSound.length; iCnt++) {
// Start playback for each sound, at the time position set in the
[code]....
Seeing as this didn't work, I have no clue what I could give a shot next... so if anyone has any ideas or suggestions, it would be greatly appreciated! Something else I noticed, was that if I run the application on very fast PCs, the MP3s are almost always in sync, but the PC that I'm developing on isn't that sluggish either and they hardly ever run in sync on it - so it will form a problem for pretty much all of the people who will use the application.
I'm very new to Flash and actionscripting, I work in CS3 with as3. I want the sound to fade out smoothly (volume gradually decrease) when clicking on the stop-button. I have really tried searching the Internet for topics on this, but can't manage to implement anything in my prodject that works. [code]...
View 5 RepliesThe client requested a simple slideshow with 8 images. I was able to piece that together, but only issue left is how to add a fade-in fade-out effect. The images I'm using on not embedded in the flash file but are ref from an xml file so the basic method is out of the question.
[]---XML FILE -----------------------------[]
<xml>
<images>
<a title = "_0000_shiny_wristlets.jpg" />
<b title = "_0001_LSSRT.jpg" />
[code]....
I'm trying to analyze the sample file load_images.fla which is delivered with flash mx... and here's my problem:there's a line in the first frame in the actions layer which is as follows:if (whichPic<5 && !fadeIn && !fadeOut) {.........}now what is "fadeIn" or "fadeOut"? I thought it might be a method of the MovieClip-Object, but it's not listed in the actionscript-reference. then I thought, it could be a method defined within the flash-movie itself, but it isn't (at least i couldn't find it). so what is it?
View 1 RepliesI coded a xml slideshow with the pictures fading in but I cant seem to find the right technique to hold a picture and fade in the next. I read up on swap depth but cant seem to implement it through the use of a xml file but I have seen exaples using an array.URL...
View 2 RepliesI like to think i have a decent knowledge of AS, but this silly little problem has evaded me... Check out my FLA. I'm trying to make a very simple function that will fadein/fadeout a MC whenever run.. you should understand from the FLA.
[URL]
I'm building a website with fadein/fadeout transitions between sections. On button click, a white rectangle on the very top layer (filling all the screen) is faded in. Once ended, the section changes and the rectangle fadeout is started.
It technically works, but I've noticed that the first transition is not fluid, while the next are fluid. Does exist an efficient technique to achieve the goal?
I coded a xml slideshow with the pictures fading in but I cant seem to find the right technique to hold a picture and fade in the next. I read up on swap depth but cant seem to implement it through the use of a xml file but I have seen exaples using an array.
View 2 RepliesI want to do the same effect of time line like the link below, did any one know how to do that! [URL]I know the script for changing photo when you slide the bar in the slidebar!But can I add a fade in fade out effect between photos? Below are the script
"slider._y = slide_area._y;
slider.onPress = function(){
startDrag(slider, true, 0, slide_area._y, slide_area._width, slide_area._y);
}
[code]...
I bought a flash template and I want the background music to fade out automatically when it changes to the DEMO page so the person can hear the video clip without the background music that brought the template. I am new on flash CS3 so I know a little bit of AS 2.0. I just want the same concept like the webpage www.doubt-themovie.com when it hit the VIDEO page that the music fade out.
View 1 RepliesI'm making a banner for a personal site that cycles through a set of images loaded from XML (makes it easier to add/remove images whenever I need to) and I have used the slidshow script located here:how.htm for the base.What I have so far is working as expected, my images load with a fade in effect pause for a moment then cut off and the next image loads with the fade in effect (loop).My problem is that I would like the images to fade out (quicker than the fade in) after the short pause but I cant work out where in the script I need to execute this.Here is the script so far:
Code:
pauseDelay = 6000;
this.fadeInSpeed = 3;
[code].....
I have the following file which creates a really simple slideshow... At the moment you currently have to click to fade out and then fade back in to the next image... I just want it to run and play 10 images continuosly fading in and out...
View 1 RepliesI wrote the code for a tween function called fadeOut. As you can understand, its end is to fade out the alpha property of an instance.the code uses an addEventListener:chooseBlue_btn.addEventListener(MouseEvent.CLICK, fadeOut);so when the button named chooseBlue_btn is clicked the fadeOut is called:[code]But I would like to call fadeOut when the clip starts without using a button.In which way?
View 4 RepliesFadeOut or FadeIn this dynamic text. And here is my fla file. So you can see and understand what i'm talking about.
View 3 RepliesI'm working on a slide show with external SWFs. I got everything to work (almost evrything ) ... Whwat I'm trying to do is have a nice transition.. I have the Loading SWFs Fade in... but there's still a split second of the white space under... so I was trying to have the Unloading SWF FAde out wile Loading SWF is Fading in... or something close to that.
[Code]...