I'm very new to Flash and actionscripting, I work in CS3 with as3. I want the sound to fade out smoothly (volume gradually decrease) when clicking on the stop-button. I have really tried searching the Internet for topics on this, but can't manage to implement anything in my prodject that works. [code]...
View 5 RepliesI have used the script below to load the mp3 file, but I couldn't do what I used to when I imported the mp3file to stage and I did it there. Is there a way to place fadeout at the end of the music and make the sound lower and lower, is there a way to apply something like that via Action Script?
mySound=new Sound();
mySound.loadSound("sommeu.mp3",true);
mySound.start(0,0);
I need to produce a photo review show (basically, a photo slide show), which incorporates still photography, and numerous video clips. We will have music playing in the background (not on the timeline - in the actionscript). The full presentation will run automatically - no user interaction, and therefore, I need the background music to automatically fade out when the video starts, and then fade back in when the video ends.
1. Is Flash CS5 the correct software to do this in?
2. code to tell the sound to fade out when the video starts, and fade back in when the video ends?
The client requested a simple slideshow with 8 images. I was able to piece that together, but only issue left is how to add a fade-in fade-out effect. The images I'm using on not embedded in the flash file but are ref from an xml file so the basic method is out of the question.
[]---XML FILE -----------------------------[]
<xml>
<images>
<a title = "_0000_shiny_wristlets.jpg" />
<b title = "_0001_LSSRT.jpg" />
[code]....
I'm trying to analyze the sample file load_images.fla which is delivered with flash mx... and here's my problem:there's a line in the first frame in the actions layer which is as follows:if (whichPic<5 && !fadeIn && !fadeOut) {.........}now what is "fadeIn" or "fadeOut"? I thought it might be a method of the MovieClip-Object, but it's not listed in the actionscript-reference. then I thought, it could be a method defined within the flash-movie itself, but it isn't (at least i couldn't find it). so what is it?
View 1 RepliesI coded a xml slideshow with the pictures fading in but I cant seem to find the right technique to hold a picture and fade in the next. I read up on swap depth but cant seem to implement it through the use of a xml file but I have seen exaples using an array.URL...
View 2 RepliesI like to think i have a decent knowledge of AS, but this silly little problem has evaded me... Check out my FLA. I'm trying to make a very simple function that will fadein/fadeout a MC whenever run.. you should understand from the FLA.
[URL]
I'm building a website with fadein/fadeout transitions between sections. On button click, a white rectangle on the very top layer (filling all the screen) is faded in. Once ended, the section changes and the rectangle fadeout is started.
It technically works, but I've noticed that the first transition is not fluid, while the next are fluid. Does exist an efficient technique to achieve the goal?
I coded a xml slideshow with the pictures fading in but I cant seem to find the right technique to hold a picture and fade in the next. I read up on swap depth but cant seem to implement it through the use of a xml file but I have seen exaples using an array.
View 2 RepliesI am loading mp3 files from php into Flash based on when a user clicks a link of audio files to listen too. I would like for the audio to start fading out 10 seconds before it finishes.how I can determine when a song will end and create a timer around this.
View 3 RepliesI want to do the same effect of time line like the link below, did any one know how to do that! [URL]I know the script for changing photo when you slide the bar in the slidebar!But can I add a fade in fade out effect between photos? Below are the script
"slider._y = slide_area._y;
slider.onPress = function(){
startDrag(slider, true, 0, slide_area._y, slide_area._width, slide_area._y);
}
[code]...
I bought a flash template and I want the background music to fade out automatically when it changes to the DEMO page so the person can hear the video clip without the background music that brought the template. I am new on flash CS3 so I know a little bit of AS 2.0. I just want the same concept like the webpage www.doubt-themovie.com when it hit the VIDEO page that the music fade out.
View 1 RepliesI'm making a banner for a personal site that cycles through a set of images loaded from XML (makes it easier to add/remove images whenever I need to) and I have used the slidshow script located here:how.htm for the base.What I have so far is working as expected, my images load with a fade in effect pause for a moment then cut off and the next image loads with the fade in effect (loop).My problem is that I would like the images to fade out (quicker than the fade in) after the short pause but I cant work out where in the script I need to execute this.Here is the script so far:
Code:
pauseDelay = 6000;
this.fadeInSpeed = 3;
[code].....
I have the following file which creates a really simple slideshow... At the moment you currently have to click to fade out and then fade back in to the next image... I just want it to run and play 10 images continuosly fading in and out...
View 1 RepliesI wrote the code for a tween function called fadeOut. As you can understand, its end is to fade out the alpha property of an instance.the code uses an addEventListener:chooseBlue_btn.addEventListener(MouseEvent.CLICK, fadeOut);so when the button named chooseBlue_btn is clicked the fadeOut is called:[code]But I would like to call fadeOut when the clip starts without using a button.In which way?
View 4 RepliesFadeOut or FadeIn this dynamic text. And here is my fla file. So you can see and understand what i'm talking about.
View 3 RepliesI'm working on a slide show with external SWFs. I got everything to work (almost evrything ) ... Whwat I'm trying to do is have a nice transition.. I have the Loading SWFs Fade in... but there's still a split second of the white space under... so I was trying to have the Unloading SWF FAde out wile Loading SWF is Fading in... or something close to that.
[Code]...
I've got a timeline of events going on with about a dozen frames and about a dozen buttons. Clicking on each button will take you to a different frame. Simple enough. I have no problem with fading the specific frames in (I make the whole content of the frame a movie clip, then tween the alpha programatically as soon as you enter that frame). The issue I have is fading it out, so when you click on another button, that content on the current frame fades out and then you jump to a separate labeled frame, where the new content fades in).
View 7 RepliesI'd like to build a fairly simple website where the pages fade between each other, after looking around and remembering what I could from having Flash MX (can't remember which release) all those years ago I figured the best way would be something like this:
Pages as movieclips, these would be placed inside the stage, i.e. with space around them, and buttons along on side which, when clicked will fade in one 'page', and fade out any others where the alpha is at 1.
That way, using only one frame in the main timeline and not having to create fading tweens in each movieclip I can navigate freely between the pages in any order.
I managed to get to the point where I have two buttons and to movieclips, when the first button is pressed a 'page' fades in, and when the next is pressed the first 'page' fades out as the second fades in. However the fade out is delayed and much slower than the fade in, rather than faster as it should be.
Here's the AS
page2btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_4);
function fl_MouseClickHandler_4(event:MouseEvent):void
{
[code]....
how I might restructure this to get a the visual results I want in the most efficient manner?
I have an XML file that is updated every three minutes. The amount of records in the file can and will change. What I want is to load the XML, fade in 6 records, pause 5 seconds, fade out then in the next 6 records until the end of the file is reached. At that point, reload the XML file and repeat the process till infinity.
I have the XML file loading. I am able to count the records, parse the XML, and manually place XML data into dynamic text fields. I cannot get my FOR loop to function properly or get the script to pause between pages. I have not even attempted the fade in/out yet. I think I should have it parsing data properly before I add the cosmetics.
MY CODE:I do not get any compiler errors, but I do get an ouput error:
TypeError: Error #1010: A term is undefined and has no properties.
at xml_data_fla::MainTimeline/processXML()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
I think it is throwing this error as soon as it tries to display an empty record, if that makes since. Say there are 17 records. 17 / 6 = 2 with 5 remaining. When it tries to display the 3rd incomplete page the error is thrown (I think). When I test the file, it only displays the last page before an incomplete page. Here is what I have so far:
ActionScript Code:
// *** XML LOADER *** //
var xmlLoader:URLLoader = new URLLoader();
var xml:XML;
[code]....
I am dynamically loading images into a blank movie file. I would like if the images fade in as they load. Remark, I am not using a slide show effect. All i would like to do is load image and make it fade in. When the user clicks to go to the next frame the image should fade out. How to do this?
View 9 RepliesI'm trying to make a scene in a game fadeout by have a movieclip. I have the movieclip and want to put inside the movieclip timeline some actionscript to go to the next frame but the simple
gotoAndStop("frame2")
doesn't work.
I have a very simple main.swf with buttons in a mc. once a button is clicked it loads and external swf file into x y pos.
How can I set it up so when the external swf loads with a fade in and the other one fades out?
This is my existing code now!
var Xpos:Number = 0;
var Ypos:Number = 75;
var swf:MovieClip;
[Code].....
how I might be able to accomplish this with this code. This code is from [URL] it works great but just need it to fade in and out the swf files.
I have found some code on the web that loads a picture from a folder into a movie clip, and cyle with fadeOut and fadeIn to the next picture by using left and right arrow. I have made some changes to this code by having the pictures cycle with a timer and I also added a group of 6 movie clips for a total of 7 with their own set of picture arrays. So far so good however I am trying to get the fadeOut and FadeIn with a small delay from each other but always in the same order. In other words I want to have clips 1 to 7 fadeOut with a small delay of maybe .5 sec. between each and same thing when the next picture fades in.
[Code]...
I have a fadeIn prototype of:
[Code]....
This fades all my objects so on and so forth. I have a movie that is loaded into the _root, inside that is an mc called photos, jpgs are loaded into here and faded in. This photos being loaded in thing is based off some other code written by ... I can't remember I was looking to save time Anyway, thats like so.
[Code]....
could someone with scripting a fadein/fadeout transition for external swfs between the button clicks or suggest another way to do it?
View 1 RepliesI am triggering short sounds dynamically from the library for a game (Specifically Air for Android). When the user clicks a button the sound can take up to 600ms to actually play. I have set it for any silence before the actual sound by calling the sound like so:
[Code]...
All return the same results. I know there are threads here that talk about this but none have offered a real solution that I can find. Is there no way to cache the sound or store it in a buffer?
I suspect I'm doing something silly here. Keep getting a #1009 error pointing towards the fadeOut function on frame 2. Here's the scoup, TIA! Frame 1: Clickable Logo that sends the playhead to frame 2
[Code]...
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.
I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)
I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
I have several buttons in a movie and I want to be able to rollover an individual button and play the sound for that button and when I rolloff I want the sound for that button to stop.
View 6 Replies