ActionScript 3.0 :: Find Dynamic Textfield's Wrap Or "" In HtmlText?
Jun 13, 2010
does anyone know in which places does a dynamic textfield wrap (or creates a new line that doesn't exist in the original string), and how to connect it to the proper position in it's htmlText?if it's characters like "", how would i find the place where this "" happened, in the original htmlText?
I have a text field on the stage with an instance name and is set as a Multiline text field. I'm populating it with data from an XML file.When I test my movie...the text field cuts off the text at the end of the text field and does not wrap to a new line like the Multiline setting.I even added a line of code to say
Is there a way to show a long text in a dynamic text field with multiline attribute = on, without word wrapping? E.g., A dynamic text field contains 2 lines, and multiline is set to on. If I try to display a text in the text field, it is wrapping at the word, thereby losing some space in the text field (see code below):
The display is showing only "One Hundredyear" in two lines, and the rest of characters are below the visible text area. The issue here is in the first line there is only "One" displayed, leaving a lot of space. If I can accommodate more characters in the first line, without word wrapping, the second line can accommodate the rest of the characters.
HTMLText is displaying really strangely. I'm displaying a textField with htmlText provided through XML, and in this bulleted list it'll display the first line all on one line, keep going off the end of the textareas size (ie. not do multiline) until the last word of the bullet, then put that word at the start of the next line. And it'll put the last word on the next line no matter how long your bullet item is.
eg.
myField.htmlText = "<li>Seek the input of experts</li>;
Would output
'seek the input of
experts'
I've checked and this thread was similar however I've removed all my tweens to test and it hasn't had any effect.
what to do about this? I've tried these to no avail:
I just discovered that one of my old AS2 projects isn't working properly anymore in Firefox.I have a multiline TextField with htmlText that works fine in the Flash IDE, and fine in IE8, but in Firefox it behaves rather strange: each paragraph appears on exactly two lines, no matter how long it is! It always breaks before the last word of the paragraph, even if the whole of the line is shorter than the textfield width.
But this behaviour only shows up if the text is loaded in from an XML file! If the same text is simply assigned to a string, it works normally.
I have a TextField with multiline and word wrap enabled, and a fixed width. I want to calculate the total height of the text inside it. I tried using TextField.textHeight, but that gives me the height of one line. Because of the wrapping, I can't easily calculate the number of lines to multiply it with the line height. TextField.height just gives me the fixed, default height of the field, 100 pixels.
I've got some text coming from XML, its loaded inside "my_Text" textfields inside a "clip_mc" movieclip.. how do i make either of these wrap to a width? The text just runs off the screen, I need it to stay inside a box. [code]...
I have got a performance problem about TextField.htmlText +=msg.And I know thatTextField.appendText(msg) works better than TextField.text +=msg.So I wonder if there's some method better than TextField.htmlText +=msg?
just because i got no response i am putting this up once again.When i use htmlText in textFields, it does not render smooth. How can this be fixed ?Tried embedding fonts... but nothing seems to work.
I have an odd predicament that I'm trying to wrap my head around. I have a textField, that is populated by data from an xml file. It contains simple line html line break tags, and when I use the htmlText option, it doesn't seem to recognize those tags, even though they don't show up when I view it online. Here is my code:
Code: //FLASHVARS CODE var varName:String; var paramObj:Object = LoaderInfo(this.root.loaderInfo).parameters; for (varName in paramObj) {
[Code]......
I can't figure out how to make it render properly. If I choose a dynamic text field already on the stage it works fine, but then the scrollbar doesn't work. I read that a TextField automatically uses a scrollbar when it gets too long. Can anyone suggest a possible work around for this? I feel the answer is staring me in the face and I just can't see it.
I have an odd predicament that I'm trying to wrap my head around. I have a textField, that is populated by data from an xml file. It contains simple line html line break tags, and when I use the htmlText option, it doesn't seem to recognize those tags, even though they don't show up when I view it online. Here is my code:
Code:
//FLASHVARS CODE var varName:String; var paramObj:Object = LoaderInfo(this.root.loaderInfo).parameters;
[code]...
I can't figure out how to make it render properly. If I choose a dynamic text field already on the stage it works fine, but then the scrollbar doesn't work. I read that a TextField automatically uses a scrollbar when it gets too long.
how could we remove auto tag adding by htmlText Property because when we apply htmlText for a textfield it automatically add <p> and <font> tag. In my project i am saving one textfield property <p align='right'> in server but when i am assigning this value from server its changing to <p align='left'>. So how could we remove this auto formatting by htmlText? As in [URL] link there is written also "When its htmlText property is traced, the output is the HTML-formatted String, with additional tags (such as <P> and <FONT>) automatically added by Flash Player." i want to remove this auto adding tag.
If i don't use any HTML tags, it displays fine. But if I add tags, such as <a> or <b>, etc... the text within the tags does not display. For example, if in the XML text i have:
<node>For more information, <a href=' http://www.link.com'>Click
Here</a> to see the information.When I run the flash move, it displays:For more informationto see the information.If i remove the <a> tags, it displays fine.
I'm trying to create hyperlinks within TextFields by using a combination of plain text and the getCharIndexAtPoint method of the TextField object.
I've got everything nailed down except for the handCursor. To solve this problem I decided to place the TextField within a Sprite container and have the MOUSE_MOVE event attached to the TextField signal to its parent [Sprite container] that it should modify its buttonMode, useHandCursor, and mouseChildren properties to allow the hand cursor to be displayed, which I'm happy to say does work.
Unfortunately when I set the mouseChildren to false and the buttonMode and useHandCursor to true. The TextField within the Sprite container stops tracking the mouse...which I understand why but was wondering if there's some other combination that would allow me to do what I need to do?
I have 3 embedded fonts in my library and I have given them a class name.Now I would like to use these fonts in HTML in a TextField object.How do I do this? I created a stylesheet and entered the font name, but it still picks it from my harddrive, because it doesn't work on other computers where the font is not installed.I have a font embedded named "Edo", and gave it the classname Edo.[code]
when i insert an image over xml into textfield with htmlText, it automatically makes some kind of padding left and above them image. Is there a way to get rid of that padding?
I am having a major issue with a textfield. I have a dynamic text field which receives html so its htmlText I cant use the regular textFormat as the overrides the bold tags in the html. So I need to use css. Minor complication I have to do inline css as I cant load external data due to the project specs. Not a problem I have done inline css pretty easy. But they want a non web safe font. Again no prob I can embed fonts via the library. The problem is getting the css to use the embed font from the library. I have tried adding the font as a object to my code and then in the css referencing it via myfont.fontName, as a string etc.. 5
How to set inline style sheet to htmltext of textfield component as mentioned in the xml CDATA. At present , i am using textfield.htmlText propert , but i am not able to get the fontfamily as mentioned in the xml CDATA. The text is also not getting displayed in the correct format. The image is not coming in between the 2 question strings and its getting displayed at the bottom of the question while the 2 question strings("q text info", "with images also") are displayed as a single string. How to reformat the xml so that the image comes in between.
I have some HTML loaded from an XML document that includes web links (anchor tags). I am using a TextField object to display the text, and am plugging the XML data into the htmlText property of the TextField, and the text is rendering with HTML markup, links are working etc.
The problem I'm seeing is that a new line is created before and after the link, so html like this:
hello world <a href ="#">this is a link</a> and all of this should be on the same line.
is rendered like this (with specific attention paid to the new lines): Does anyone know of a way to prevent these new lines from appearing when using HTML links within a TextField?
i'm making a small "add news" movie for a site in actionscript. When I insert an image in my textField, I can only move the cursor with my keys and not with my mouse anymore. I put the image always in front. I also have to click one time in my textfield, otherwise my text appears under my image. When I click it aligns to the right.
I am populating a dynamic text box with some information that comes from an xml.
//fill in the text infoBox.informationText.htmlText= "<font size='16' color='#FFFAF0'>"+calledMarkerIndex+[code]....
I am also placing an image in the text box which you can see from the url above.I would like this url to be dynamic just like the other variables that are filling in the text box calledMarkerIndex, calledMarkerDate, calledMarkerDescription.
I have another variable which specifies the url I'd like named calledMarkerContent. I've tried simply chaning the text piece for this but it does not work.
"<img src='calledMarkerContent'/>"+
I feel like maybe I am just making a scripting error. Or maybe I cannot use a dynamic variable in this place.
I have a standard text field which is set (using theproperties window) to 'Dynamic Text'. I have the following code to set the text...eval("_root.thead"+i).htmlText = tmp;When I view the program the text field is Input, and notdynamic!I have tried including the line ...eval("_root.thead"+i).type = "dynamic"... but this has no effect.Is this a bug or am I missing something obvious?
I am consuming XML which I have no control over. the XML has HTML in it which i am styling and displaying in a HTML text field. I want to remove all the html except the links.
Strip all HTML tags except links is not working for me.
does any one have any tips? regEx?
the following removes tables. var reTable:RegExp = /<tables+[^>]*>.*?</table>/s;
but now i realize i need to keep content that is the tables and I also need the links.
Is it possible to capture the image loading event like when the image is fully loaded and such when it is assigned to the htmlText of the textFiel???
I have a scrollPane that contains a textField which is loading an image via img tag where there is no scrollbars initially because the textField is not large enough in the beginning, but it is larger than the scrollPane after the image is fully loaded.. and I am trying to update the scrollPane once the image is fully loaded..
does anbody know how to travers the whole swf and look for instances of type textfield? i mean is there any poroperty(or whatever) which uniqly identifies the textfield?
i want do do something like:
1 get all available instances in swf 2 check is it a textfield 3 if it is, change the bgcolor