ActionScript 1/2 :: HtmlText Loaded From XML Does Not Wrap Properly In Firefox?
Aug 14, 2010
I just discovered that one of my old AS2 projects isn't working properly anymore in Firefox.I have a multiline TextField with htmlText that works fine in the Flash IDE, and fine in IE8, but in Firefox it behaves rather strange: each paragraph appears on exactly two lines, no matter how long it is! It always breaks before the last word of the paragraph, even if the whole of the line is shorter than the textfield width.
But this behaviour only shows up if the text is loaded in from an XML file! If the same text is simply assigned to a string, it works normally.
View 6 Replies
Similar Posts:
Mar 22, 2011
I'm using TextFields to draw text into BitmapData. The problem is that my words are not wrapped completely, by example :
var textField:TextField = new TextField();
textField.wordWrap = true;
textField.multiline = true;
textField.width = width;
[Code]...
View 1 Replies
Jun 13, 2010
does anyone know in which places does a dynamic textfield wrap (or creates a new line that doesn't exist in the original string), and how to connect it to the proper position in it's htmlText?if it's characters like "", how would i find the place where this "" happened, in the original htmlText?
View 4 Replies
Jan 19, 2011
I have a TextField and I am trying to display embedded images using htmlText:
var test:TextField = new TextField();
test.multiline = true;
test.wordWrap = true;[code]....
In this case the raftImg is in the Assets class. The problem is that the image does not align as it should (it always stays in upper left corner). If I load it using "../ blah/ img.gif" it works properly.
View 1 Replies
Jun 15, 2007
I have been desperately looking everywhere on theweb to solve this issue and this is actually the first time I ask aquestion in a forum, because I can always find my answers byGoogling them.This is fairly easy to explain, but this is a really annoyingissue.I got the latest version of Firefox and the latest FlashPlayer version. If I print out web pages having SWFs on them, theydo not show either on the print preview, then on the print outitself. How could this happen? Using Microsoft Internet Explorer, Ihave no problem whatsoever to have everything printed out in thesame context.
View 2 Replies
Aug 18, 2011
Everything was working fine. However, today when I check it, the XML isn't displaying properly in Firefox. Yet it works fine in IE, and was working in Firefox yesterday. Would some of you guys mind checking it in Firefox, and letting me know wether it works ok for you's, and wether its just my installation
View 2 Replies
Mar 4, 2011
I sorted this problem before, but it's back again.
Both of my animations work fine in firefox, but don't loop in IE.
ABOUT ME [URL]
KZX ANIMATION 2ND FROM BOTTOM [URL]
confirm that these animations don't loop properly in IE?
View 2 Replies
Mar 28, 2009
This is the code I use to run a swf that makes zoom on images:
<body>
<center>
<OBJECT classid="clsid27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash
[Code]....
This code works properly in IE7 but in Firefox I have discovered that the images are loaded after than the swf. This swf file needs some parameters to work with the images, but if the images are not loaded previously then the swf does not work properly. In firefox, a page refresh is needed if the images are not yet loaded in the cache.
I have resolved the problem partially preloading the images in the previous page link using: <img src="imagebig.jpg" style="display:none;" alt="" width="781" height="1051"/> With this solution, the images are loaded prior to the swf loading.
View 1 Replies
Nov 17, 2010
The latest versions of firefox and Safari both cannot display email links. For some reason they don't parse ou the "mailto:".
View 5 Replies
Oct 30, 2011
I need to dinamically load some texts and gaps (input texts) from an XML file and show them in a panel. I found the documentation of panel on Adobe, how I can to automatically wrap the list of objects if the line is longer.
View 1 Replies
Nov 13, 2009
I am working with Flash CS 4 with AS 3.0. I use the following code to hook into Loading complete for mystage:this.loaderInfo.addEventListener(Event.COMPLETE, loaderComplete);The code works properly in IE 8.0 (Windows 7) and Chrome. I have Flash Player 10 installed and the movie is targeted for Flash Player 9. The movies are showing a random behavior on FireFox 3.5.3.The website is under construction. The top bar contains 7 small & 1 big flash movie. View the page first in IE or Chrome. Then see it in FF. The labels from the flashvars are not being picked up properly. The load Complete function is not working properly.
View 5 Replies
Oct 25, 2006
Here's the site: [URL] From feedback I've gotten, it appears that under certain circumstances the first image in a set of images does not load properly, although I haven't seen it myself. I'm told this happens only in Firefox. And I believe only Flash player 8. Works fine with FF and Flash player 9, or IE with 8 or 9 I believe.
View 14 Replies
Mar 9, 2012
Can anyone have some time to look into why in these fla the xml file is not loaded properly. If possible please take a look. As the file size is very big kindly download the same from this link.url...
View 2 Replies
Jul 29, 2009
I've created a flash banner in action script 3.0. I've attached it with html with swfobject.js method and with wmode transparent. It works in IE 6/7, safari, opera, chrome, but it's sometimes not load in firefox both 2.0 and 3.0. when i removed the wmode property form javascript. it works on firefox.
View 2 Replies
Oct 13, 2010
I'm trying to create universal loader of flash games on one entertainment site. What I want is to make some kind of container (SWF A) which will load another flash to it (SWF B) (by some params).
SWF B could be anything - AS1 / AS2 or AS3 flash. SWF A is programmed with AS3. Problem is that not all SWF games, which I try to load, works fine. Some games lost their click events, some games does not load at all, some games are corrupted. When I run that games separately (not using my loader), games work just fine. Why is this happening? Why some flash games are not working properly after loading by another flash?
I'm using Loader object to handle this, without any special settings - same as on examples on AS3 Bible book...
View 9 Replies
Sep 2, 2011
On my main timeline i have some buttons. When you click a button you are diverted to the a frame label on the main timeline.
When the timeline stops at say frame 2 an flv is loaded into an empty movie clip on the main stage. If you click on button 2, same thing. So in total I have about four FLV's that play when a button is pushed. If i keep clicking my buttons to test the smoothness of my flv's, after about three clicks from navigating between my frames/loaded flvs, my entire main movie becomes slower.
Each FLV is about 5mb.
Below is the code that gets initated when I click my button and am taken to that frame. My question is this, if i'm jumping between FLV's at every button click is the FLV that played first still playing and causing the entire main movie to slow down? Is there a better way to manage this? Do I have to unload the movie being played when i click? I'm trying to see if there an more efficient way to have smooth streaming from my flv. The flv that is getting initated is simply looping when it's done and servers a 'moving background'.
is there something else i can implement into my code that will keep my loaded flv's playing smoothly?
[Code]....
View 11 Replies
May 31, 2011
I am trying to create a new flash movie. I am using CS4, for publishing movie -> flash 8 - AS-> 3.0. My issue is if I publish the movie I receive the following complier errors - > ActionScript 2.0 class scripts may only define class or interface constructs.
Attribute used outside class.
The class or interface 'flash.net.URLVariables' could not be loaded.
The class or interface 'flash.net.URLRequest' could not be loaded.
The class or interface 'flash.net.URLLoader' could not be loaded.
The class or interface 'flash.events.Event' could not be loaded.
The class or interface 'flash.net.URLVariables' could not be loaded.
ActionScript 2.0 class scripts may only define class or interface constructs.
The class or interface 'URLVariables' could not be loaded.
[Code] .....
View 1 Replies
Dec 22, 2010
I have a main movie which loads a movie with buttons, a button is clicked and movie goes to second frame and plays an animation then at the end of the animation it loads the next movie. ToolShopAnim01.swf does not stop on the first frame. I can not figure out why. Sometimes it works, but I can't seem to find the cause of it not stopping!
Here is the code in that frame once animation stops.
stop();
_parent.startPreload("ToolShopAnim01.swf");
The code below is on the first frame of ToolShopAnim01.swf.
stop();
foundational.onRelease = function() {
gotoAndPlay (2);
} foundational.onRollOver = function() {
[Code] .....
View 2 Replies
Apr 14, 2007
I have some problems with Bitmap displaying properly loaded image, when providing variables as width and height in the constructor as opposed to numbers, example:
[Code]....
Running the app with this code cuts away half of the picture from right and half of the picture from the bottom. Since the BitmapData is filled with solid white background, the clipping is clearly visible. When line marked with [*] is commented out, and line marked with [**] is uncommented instead, the whole picture displays and all is just as expected. The only difference between those two lines of code is, that in line [*] are used some properties+variables, and constants are used in line marked with [**].
View 5 Replies
May 2, 2010
Finding out my that my values are not loading the formfields in Firefox while they are loading perfect in IE i set up a small test.The codes are fine with IE and give a problem with Firefox and Safari
Code:
//Sending values.
knop3.onRelease = function() {
[code]......
View 2 Replies
Feb 8, 2012
Finding out my that my values are not loading the formfields in Firefox while they are loading perfect in IE i set up a small test.The codes are fine with IE and give a problem with Firefox and Safari
Code:
//Sending values.
knop3.onRelease = function() {
zend = new LoadVars();
ontvang = new LoadVars();
[code]....
View 1 Replies
Mar 10, 2011
I'm creating a banner advertisement in Flash. It pulls all information from an XML file. Images for each product are also loaded externally. Everything is working fine except for 1 thing.
I have an image separator i'm using as a background for each product container to lend a bit of separation to each product. But when I try to add it using code it's only added to the last item. Doesn't matter if it's 10 items or 2 items...it's only being added to the last one and i'm not sure why. Anyways, i've zipped up the associated files and put it on my webserver. I'm using the Tweener class and have included that in the archive as well.
Here's a link to the archive : Project Files
View 1 Replies
Nov 23, 2009
I have made a presentation with voice over, in which the images and audio files are loaded externelly from the folder where the swf was placed. the voice over files are in MP3 format, loaded with the script follows
mysound = new Sound();
mysound.loadSound("voice1.mp3");
mysound.start(0,0);
It works well in IE but not in Firefox.
View 1 Replies
Nov 23, 2009
I have made a presentation with voice over, in which the images and audio files are loaded externelly from the folder where the swf was placed. the voice over files are in MP3 format, loaded with the script follows
mysound = new Sound();
mysound.loadSound("voice1.mp3");
mysound.start(0,0);
[code]....
View 1 Replies
May 28, 2009
how you properly organize dynamically loaded thumbnails from an xml file, into a grid.What I'd like is for the number of columns and rows to be set in the xml file also, and for the flash file to auotmatically fill out the rows / columns based on how many thumbs are in the xml file.
I've found examples of this type of thing in both as3 and as2, but I can't seem to get my as2 version working properly... how to create a thumbnail grid in as2...I don't really want the thumbs to link to a bigger version fo the image...
View 5 Replies
Nov 18, 2009
I have a swf that loads into another flash file through an empty movie clip. For some reason, the swf isn't working properly. It works fine on it's own, but once it's brought into the other flash file via empty mc some elements of the swf do not show up or function properly.
View 2 Replies
Apr 16, 2009
I want to build a xml news with images, the image path is there in XML. Image serve as thumb, and then news title and content below...if we have 3 item as news, we all stack it vertically and using scrollbar to sroll content below. done that, but...this time, I want to use different kind of HEIGHT of the images, so my vertical scrollbar can scroll them down. my previous file,I load a fixed height, so stacking will not a problem. For instance if we know that the max thumbnail is 150pixel, then its easy, after XML loaded,I run a function to stack them, let say the next news Text(title & decs) is 150px + 10pixel as vertical offset.
However, if I dunno the next image's height, flash seems cannot detect the height of the PhotoMC where we load images to.so we cannot execute all in one frame, I heard we can achieve this using listener.my pseudocode is something like this
Code: Select allloading News XML
Process XML
Detect Thumb?if Yes,[code].......
how to achive this? So I can detect the dynamic pics_mc._height being loaded and stack them properly?
View 2 Replies
Jul 21, 2009
works perfect on my macbook pro (safari, firefox, and opera) but when I view the site on Vmare Fusion Windows XP and use IE and FireFox the pages don't load... I don't know what to make of this. Has anyone hear or seen anything like this happen before? BTW the website was created in Adobe Flash CS4/ AS 3.0 and published using Flash Player 10.
View 2 Replies
Oct 6, 2010
Situation: Got a flash object with an icon bar (div with pngs) on top of it. Works on all browsers except Firefox 3.6 on Ubuntu 8. Example: http://ListAndPlay.com
Problem: Icons suddenly disappear after the flash is being loaded. See this screenshot: http:[url]...What I've tried: Setting z-index, recoding the JQuery behind it, nothing works.
View 1 Replies
Sep 20, 2011
I am trying to wrap some text with a component but can not figure out how to align them correctly. Here is what I am looking for:If you have not entered your credentials, enter your credentials by clicking Set Credentials.
The "If you have not entered your credentials, enter your credentials by clicking" is a string.The "Set Credentials" is a button so it can be clicked by the user.I tried putting the string in a textarea which wrapped the text but could not get the button to horizontally align with the text. I also tried adding them both with Tile, then I do not get proper wrapping.
View 2 Replies
