I have a full browser image slideshow. It works fine. I have a top menu with some buttons and with each one of them I would like to load a new slideshow swf on top of the existing one while still using the full browser layout. Is it possible to load the new external swf so that it will match the size of the first one? I have been trying numerous times...and the new swf I load always appears offset.
View 0 RepliesThere are two external swfs loaded in one main flash file - the rolling ball, which is a default external swf, and the circles swf, which loads after the gray button is clicked. I would like the circles swf to load into the blank movie clip I have set up. I would like the external swf contained within the blank movie clip to be full browser flash and scaleable with any change in browser size. To do this, I set up some actionscript to make the blankmc full browser and scaleable (i've done this on a regular movie clip slide show from within a flash file, rather than being an externally loaded swf, and it worked.) with the hope that the blank movie clip and its contents, which would be the external circles swf file, would resize and rescale appropariately if the browser window were changed.
Currently, when the gray bar is clicked, the circles swf comes in not as full browser. Once the window is resized, the animation relocates itself to the lower right corner, with the top corner of the external swf situating itself on the center of the blank mc. I know this is a registration issue, but before resize the animation is where i want it. Also, while the scale of the circles animation does change with the browser window size, it does so i a wacky way.
Take a look at this swf file at [URL].. Click on the gray bar, then once the circles animation begins, try resizing the browser window. There are two external swfs loaded in one main flash file - the rolling ball, which is a default external swf, and the circles swf, which loads after the gray button is clicked.I would like the circles swf to load into the blank movie clip I have set up. I would like the external swf contained within the blank movie clip to be full browser flash and scaleable with any change in browser size. To do this, I set up some actionscript to make the blankmc full browser and scaleable (i've done this on a regular movie clip slide show from within a flash file, rather than being an externally loaded swf, and it worked.) with the hope that the blank movie clip and its contents, which would be the external circles swf file, would resize and rescale appropariately if the browser window were changed.
Currently, when the gray bar is clicked, the circles swf comes in not as full browser. Once the window is resized, the animation relocates itself to the lower right corner, with the top corner of the external swf situating itself on the center of the blank mc. I know this is a registration issue, but before resize the animation is where i want it. Also, while the scale of the circles animation does change with the browser window size, it does so i a wacky way.
I want my SWF to fill the browser window, but it's not working in Chrome/FireFox unless the user manually resizes the browser. I'm using Adobe's default, generated html + swfobject.js to show my SWF. In the html, I replaced all flashcontent heights and widths with 100%. Unfortunately, in Chrome when you first open the page the Flash MovieClip doesn't fill the browser and instead retains it's default height and width.
If the user resizes the browser window, everything works fine. Is there a javascript trick or something I can do to make the Flash think it's being resized? I never want scrollbars to appear. I want my application to scale and fill the browser window perfectly -- I want it to get really small if the browser is small and really big if the browser is big. Basically, I want my app to run like a normal Windows app, such as Visual Studio, but in a browser.
Essentially I have an animation with two main movie clips - a foreground and background movie clip.I want the foreground movie clip not to scale but the background movieclip to take the full screen of the browser.I'm only using vector images
View 1 RepliesI am working in Flash CS3 and Actionscript 3.0 My application resizes according to browser width and height. If the user first resizes the browser and then loads the flash application, I could not get the full browser width untill the user goes for full screen. Is there any way around, to get the full browser width before the user goes for full screen.
View 1 RepliesI'm working on a small flash site and I want the swf file to have "bleed" or to go to the very end of the window so that the swf isn't just ploped over top of a background. [URL]
View 1 RepliesI have a standalone Flash projector running off CD. Currently, I use
getURL("http:url....);
to open the page on default browser. Only problem is the browser window is opening at the size it was last used. I like to see it opens full screen.
[URL].. Anyone know the AS to make it automatically check the size of the browser for the listeners_notice when you resize the browser it works perfectly...but not when it first loads up.
[Code]...
It was designed in Flash MX 2004 on a mac. I need to make the site load full screen in the browser but with the content not to scale with the content to remain centered at all times if the screen size is larger than site. How do I do this? What publish settings does it need and do I use fscommand? Or does it need html code adjustment?
View 2 RepliesIn AS2 I have a full browser flash setup with some centered movieClips.
I only want them to shrink (proportionally) if the browser window is 1024x768 or less.
I would like to create a html that would embed my swf without any borders in the browser.
I've tested embedding my swf but the excess graphics in the swf were shown at the side. Is there anyway i can solve it?
I've just followed the tutorial "Full browser flash" URL...I've got it setup so everything will be inside of the "centered" movieclip. view it here: URL...BUt I can't seem to get my preloader included in the centered movieclip.[code]Basic, but it works on the main timeline just not in movieclip. Something I need to change?
View 2 RepliesI've seen the Full Browser Flash video which has tiling in the background. Can somebody supply code, and possibly an example of how to have one scalable image as the background without distortion whilst the foreground flash remains the same size. the site below is exactly what i'm after with the menu fixed to the left.
[URL]
Is it also possible to have the menu bar a fixed percentage from the top of the browser?e.
In a nutshell here's my objective: I want to create a full browser flash video (not full screen mind you, just the browser window itself).I've imported the .f4v using the NetStream and NetConnection classes and set it to replay the moment the video reaches the end. Here's the code I've used:
Code: Select all//Create a NetConnection object
var nc:NetConnection = new NetConnection();
nc.connect(null); //if video resides locally or on my server pass null to the connect method[code].......
The problem I'm having is that I don't know how to center the original vid object on the stage.Currently, the video is being resized, but only the upper left portion is visible (example: http:url]....). As it stands the vid is being placed in the top left corner before being resized. In the tutorial he mentions aligning it with the tools in the align palette, which is not applicable in my case.
I want to display an image gallery that when clicked shows a video over top of the browser (like shadowbox)- full screen.I have tried full screen but I can't get rid of the message about using the esc button that flash player displays.
View 1 Repliesa couple issues I'd like to work out. I have taken the XML photgallery tutorial a step further by making it full browser (with images centered in the browser window). To make this possible, I've sunk the "picture" mc one level deeper into a "container" mc that is centered via actionscript.
So the code changed from: picture to _root.container.picture
Problem is, the registration point for the loaded images is top left. Since some of the images are different sizes, I'd like the registration point to be dead center. How would I do this? Actionscript follows (it's a lot, my apologies).
Side note: Why is the fade-in script so poorly written? Is there a way to make the fades smooth? It works ok when on local drive, but I'm assuming that the delay introduced by an image being accessed on the server makes some of the fades very sudden and ineffective. Any idea how to force the alpha fade to wait until the image has fully loaded?
[Code]...
I want want to create a gallery where the images fill up the entire Browser window. Here is what I got so far:
PHP Code:
Stage.scaleMode = "noScale";
Stage.align = "TL";
import flash.display.*;
stop();var sl:Object = new Object();sl.onResize = function() {
[Code] .....
How can I use an XML file to get the images from?
problem regarding xml flash gallery and as 2.0. I have created a xml photo gallery from Kirupa ([URL]) I want to create a gallery where the images from the .xml fill the entire screen and scales proportionally. To achieve this I have followed this tutorial: [URL] As long as I can center the content of the mc center to stage this works fine, but when I create an empty movie clip and try to load external content from the xml file to the mc (instance name = picture) the images does not behave as espexted. It looks as if the TL corner of the jpg images are aligned TL in relation to the MC. Also the image rotates 90degrees clockwise. A final problem is that this test:
[Code]...
I am making full browser page, but resize doesnt work well. It looks like the flash took wrong stageWidth and stageHeight at the start... Then it all works but with wrong numbers [URL] (when you launch swf in standalone player, it works well - download [URL]
[Code]....
I was checking out flash templates looking for inspiration, when I ran across this template.If you open the link, you'll see a button on the right side of the flash file which allows for full screen display. There are no browser elements visible at all.
View 1 RepliesI'm learning AS3 and Flash CS4 right now and I'm trying to do what I have been doing in AS2 for years and I'm having some problems I'm trying to make a Full-Browser Flash site and upon resizing the screen I get an error #1009.I am able to to resize the mc's on the screen without a problem, but once I add simple interactivity, I get an error upon resizing the window.To duplicate this problem,I'm sure I'm doing something very stupid, but I just don't know what I'm doing wrong.
View 5 RepliesI want to develop a flash website. I have some background images. I want them to be filled the whole screen and also in center while seeing in the browser. I am able to make it into the whole screen. But while resizing the browser it is not holding into the center.
View 2 RepliesMy flash program isn't using the full browser window, even while in full-screen mode. It uses the full height but not the full width. I end up with a large chunk of white space. I have the following code for full-screen mode:
[Code]....
So the problem is that the stage's width isn't the full size of the browser. I'm using Flash Builder 4.6 is there a way to set the stage's parameters to allow for true full-screen?
In AS2 I have a full browser flash setup with some centered movieClips.I only want them to shrink (proportionally) IF the browser window is 1024x768 or less.How do I code that into my listener?
View 4 RepliesWhat I'm wanting to do is load an image into my browser dynamically at full screen. And then when the browser window is scaled the picture scales proportionately with it. (I've seen it on loads of sites, but for some reason I just can't fathom it out (which is really bugging me). I'm using the gaia framework (which is amazing) to do this by the way (not sure if that makes a difference of not?). This is what I've got so far...
[Code]...
I'm looking to create a site that has video playing full browser in the background. A very perfect example lies here:[URL]..As you can see, the video is scaled according to stage resize while the menus and such stay where they should like a perfect liquid layout. I've watched the Liquid Layout video (from this site i'm pretty sure?) and understand how to position objects on the stage according to stage resize, but I've never figured out how to scale only the video like that. The only way I've been able to do that is by setting my publish settings to NoBorder with 100% width and height, but that defeats the whole liquid layout because it scales your entire swf. I feel like it's some sort of math I'm not grasping.
I'm probably wrong, but I feel like the way I'd go about doing this would be to set everything up as a liquid layout site; that is specify stage align and scale to TOP_LEFT and NO_SCALE. I'd have my liquid menu items positioned accordingly with a resize function and for the background video I'd use a FLV Playback Component that would be manipulated through another as3 function to scale accordingly. I'd use a Playback Component so as to be able to load multiple external videos (.h264) when a link was clicked. Am I on the right track? AS3 only please!
I have a website.. and the website's background is a flash video that takes up the full browser window..now i want to put html on top of it.so essentially i have a dope full browser flash video as the background (or 1st layer) -- but then all my content / anything else is on top (2nd layer).
View 1 RepliesI am in AS2 with a working full browser flash site. I have an mc I'd like to start out at 100% but scale up to 120% if the browser window area increases. How do I tell example_mc to scale proportionally up to 120% when the window scales?
View 1 Repliesi'm trying to implement the SWFaddress for a site and am having trouble getting the swfobject to work, i think because my site is full browser. i see the swfobject that is included at Asual is a quite a bit lengthier than previous ones. When I try to change the height and width to 100% (below) I get nothing in the browser.
Code: Select all <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[code]....