I have a horizontal scrolling movieclip that scrolls when the mouse is left or right of a certain point of that movieclip. However, it only moves slightly then stops when the cursor goes over it, it doesnt actually scroll normally...
[Code]...
how do you make a horizontal scrolling text like in music players where song name scrolls from right to left for example?and then repeats itself after some time...
View 2 RepliesIm making a horizontal thumbnail-scroller. Thumbnails are loaded in to a MovieClip and placed side-by-side with some spacing.When I move the mouse to the far right of the stage, the last thumbnail is to the far right on the stage, and when I move the mouse to the left, the movieClip.x = 0.
I can do this and have a script ready. BUT: If I would like the first thumb to be at 0 when my mouse is 100px from the left side and the last thumb to be to the far right of the screen when my mouse is 100px from the right side, how would I make this happend?I've spent $30 on scripts from activeden and 5 hours on trying to make this happend, but I just CAN'T find the solution..
Code: Select allfunction moveScrollerThumbs(e:Event):void
{
if (mouseY > box.y && mouseY < box.y +box.height)[code]....
i have 2 intersecting movieclips.
is there a way to hit test point NOT detecting a bottom movieclip if the mouse is over the top movieclip?
Is there any script available to scroll a movie vertical and horizontally by adding a mask. The visible area can be scrolled vertically and horizontally.
View 3 RepliesI need to make a MovieClip rotate around it's center point to the left or right depending on mouse drag. I got some basic semblance of what i want going, but it's pretty hackish. Normally i calculate the angle and such but i only really need to use the distance the mouse travels and apply it to the movieclip and for flavor add some nice easing when you let go.
public function Main()
{
var wereld:MainScreen = new MainScreen();
addChild( wereld );
[Code]....
I'm having some troubles trying to scroll a container MovieClip across the stage.I've attached an EventListener to the stage to track the MOUSE_MOVE MouseEvent, but it scrolls in a weird way (when halfway the screen it shows about 300 px of the container, when going below the horizontal centre, it goes up and disappears from sight.This is my code:
Code:
private function moveHandler(e:MouseEvent):void
{
[code]....
I am trying to make a line point to wherever the cursor is when I stumbled upon the Math.atan2(); function. It appeared that i would put
line.rotation = Math.atan2(1,1);
to get 45 degrees or pi/4, but I was wrong. It barely moved the movieclip at all. So what I'm trying to do is to get this movie clip to rotate along with the mouse so the line is always pointing at the cursor. Also, how would you get movieclip to move along the line created by the line of these two points?
So I am working on this horizontal thumbnail menu which populates through XML. Now, the issue I am having is the actual "math" in calculating how this should scroll. I've looked around but I haven't found anything. What happens is the container holding all of the thumbs scrolls exactly to the width of the background it is on. So if you hover on the right of the menu, it quickly scrolls all the way to the end of the menu. What I want it to do is to incrementally scroll back and forth. It's just easier to click on the thumbs that way. Below is the code now.
Code:
public function MenuBar()
{
[code]....
show me an example of a horizontal mouse scrolling of a movieclip using the mousewheel?I have code that makes content scroll vertically and i have changed it to be horizontal. The scrollbar works but the mousewheel listener does not. so far it only moves one direction. It seems the delta property only works vertically.
private function mouseWheelListener(event:MouseEvent):void
{
trace(event.delta);[code].....
I am trying to make a movie clip that contains different buttons. Not all the buttons will be visible on the stage always, so I want that when the user moves the mouse arrow left, the movieclip containing the buttons updates and move along with it to the right...and vise versa. The issue I am having is that my pieces update only after I am done moving the mouse. So the movie clip is not moving along with the pointer. Attached is the code. Here is a sample of what I am trying to accomplish: [URL]
View 3 RepliesI'm trying to recreate a javascript version of the site [URL] which is in flash.
Currently I've already done up the basic layout, which is a simple horizontal container containing divs. You can see the code here [URL]
I'm thinking to set a handler for mousemove event, but I'm not sure how to do the math behind the container's left position in relation to the mouse's x position for the scrolling part.
Does anyone know of any great resources/tutorials etc on where I can create the same effect as the example link below regarding the horizontal scrolling?
[URL]
I have googled and searched everywhere but can only find actual scrollbars.
I have a strip of thumbnails in an MC that is quite long. I am masking this long strip of thumbnails so only a few can be seen at a time. I want the user to be able to move this strip to the right and left based on where their mouse is.But a lot of the solutions I've seen have used the stage width to achieve this...however, I only want the strip to move if they are over the 'active' area.....basically if they are over the mask area.And then when it reaches the end of the strip
View 1 RepliesI seem to be having difficulty figuring out the code required for mouse over and scroll left to right. Basically, I have arrows either side of the window and I would my timeline to smoothly go to the left or the right when the cursor is over the arrow.
View 5 RepliesHi I am trying to create an image scroller that just scrolls images from point a to point b on load horizontally in an infinite loop. I just used a code snippet to move it horizontally but don't how to get it to stop and at point b and loop again from a.
ActionScript Code:
game1.addEventListener(Event.ENTER_FRAME, fl_AnimateHorizontally_3);
function fl_AnimateHorizontally_3(event:Event)
{
game1.x += 20;
}
im looking for this one for a long time now.. but suddenly one of the sites that i look for this kind of tutorials point me to this link[URL].. this site amazed me so much.. lots of complete tutorials. i created one like the above tutorial, and i try to play with the script.. and works fine to me.. but i want to enhance its feature... just a small modification that i cannot do..
How to stop the scrolling if the mouse is out either left or right? It will stop at the point when mouse is rollOut for both left and right scrolls.. or let say when the scrolling will stop when the mouse is away...
I have recently followed a tutorial to make a movieclip in flash that makes buttons spin around a point depending on the mouse position. I have made my own version off this and would like to use it in a full flash website that i am making at the moment.
The only problem that i am having is with aligning this clip and as it is made up of script i cant physicly drag it to were i want it. I understand how to alighn this with x/y positioning but when i preview the flash in a web browser it is positioned correctly but then when i 'full screen' the browser this clip jumps about 4 inches down the page.
Basically I have a scrolling bar with thumbs of images that you can click and view. The bar scrolls depending on where the mouse is located along the X plane. Basically, the greater the value of X, the faster the bar scrolls to a certain extent. I am trying to figure out a way that if the Y value of the mouse cursor reaches a certain point, the scrolling stops. Like if the mouse is scrolling off the bar of images itself, the scrolling stops. As it stands the scrolling is only controlled based on where the mouse is located along the X plane and it has nothing to do with the Y value. I would like to be able to stop the bar with a certain Y value. Make sense? I Hope So :P
[Code]...
I'm currently learning Flash (CS4, AS3) and am creating a game. I have currently 1 flv file with 4 scenes, I then move from left to right and then to scene 2 and go from left to right. This is the game where items pop up that need to be clicked on and you get points.
Is there any way I can combine these onto 1 scene? Flash only allows you to have a maximum of 2880px wide.The reason for this is the transition between the scenes is RUBBISH and that my AS is not working correctly in between scenes (it loses values).
It's been a long time since I've done any work with actionscript, and alas I've forgotten nearly everything. I've tried to look for a tutorial that would explain basic animation with actionscript, but the one that I found on Kirupa was no longer there.
Basically I'd like to do this:On the stage I have a movieclip and I'd like the movieclip to move along the x-axis to a certain point and then back to the starting point again. The moving speed of the movieclip should also be adjustable.
Any tutorial about when you click on a button it scrolls over eitehr left or right to a new content. Kind of like this [URL].
View 4 RepliesIm trying to make a horizontal scroller, that pulls images from an XML document, and scrolls them infinitely.I have 2 problems with this and I have been looking everywhere for a tutorial, or example that shows how to do this and I always find something that is close to what I want but not quite.Here is what I have so far:
Code:
var mcLoader:MovieClipLoader = new MovieClipLoader();
var mcListener:Object = new Object();[code]....
What I'm wanting to do is instead of using 490 (underlined), I want to be able to get the width of each loaded image so that I can line up the next image right up against it regardless of its width (490 just happens to be the width of all of them right now).I'm trying to use the onLoadInit() function, but I know I'm doing something wrong. When I try and trace my mainLoader variable, it traces the right amount of times, but they are all the last object in the group.What do I need to do to be able to get the widths of each image as it loads, then use that variable to position the next image right after it?
also (a semi unrelated help request), what I'm doing right now is loading them ALL in creating one giant line of images, then loading in another giant line of images and just alternating between the 2 each time one is almost to the end of its length. Is there a better way to do this so that only the right amount will load, and scroll, at the beginning adding the one right before it enters stage, and as they move off stage they are removed, then when it's near the end it just adds the first one back to the end?
does anyone know the tutorial that when you click on a button it scrolls over eitehr left or right to a new content kind of like this [URL]
View 4 RepliesI am trying to get the x & y values of a movieclip(contentMc) from inside a different movieclip. Is this the correct way? Here's my code:
ActionScript Code:
myMc.x = MovieClip(root).contentMc.x;
myMc.y = MovieClip(root).contentMc.y;
I am trying to get the x & y values of a movieclip(contentMc) from inside a different movieclip. Is this the correct way?[code]
View 1 RepliesI have a scrolling static text box which scrolls up well, however when scrolling down stops showing the text toward the end of the textfield.The textfield and textfield mask are both movie clips. I have the following code on the up and down buttons:[code]
View 10 RepliesHaven't been here for a while and I'm really rusty using Flash. I looking for a tutorial or some information on how to scroll thumbnails by scrolling the mouse left or right over the thumbnails.
View 3 RepliesI have a mask over a movieclip(containing images) that scrolls on mouse over to show the hidden images, now i figured out the code but am having trouble containing the scroling ability to when i mouse over the content_mc area.so anywhere i mouse on the stage moves the content_mc, I only want it to move when i mouse over the actual content_mc movieclip?tried using currentTarget but cant figure out where i put it.[code]
View 3 Repliesif i have a movieclip or a sprite could i find (via code) where is its registration point compared to its top left point (no rotation included) ?
View 4 Replies