What do the little red squares on the lower left hand corner of the movieclips in the actions panel mean? [Fig. 1]I'm working off this template in Flash CS3, that's using ActionScript 2.0 actually. I don't know whether or not that means anything in regards to the above inquire?
View 7 Replieslike in title, i do labirynt but when i click start mouse is in middle, i want change this, mouse must be in lower left corner
View 1 RepliesI inherited a flash project from someone and if I add a simple movie clip to the stage at position 0,0 it actually ends up in the middle of the screen!
What I can see is that when I open the stage in the library, in it's properties
X=350 and Y=262,05 all the subsequent movie clips which are added to the screen as by magic are added at position X=-350 and Y=-262.05
I would really like to return to a situation where 0,0 is top left corner. Does anyone have any idea what's going on here?
So when you load a picture into a movie clip, it loads into the Top-Left hand corner.I really want it to load into the Top-Right hand corner. Is there a way?I am loading it via AS - not placing it manually, as I have a variety of images which are of different dimensions....
View 4 RepliesI have a movie clip with an actions layer. Can I call a function from an actionscript file from the actions panel?
View 2 RepliesI am using that has action frames.It is a photo album template that allows me to turn pages by clicking my mouse in the lower corner and dragging it across.If I copy frame 5 and past it as frame 8 and I change the image on frame 8 it also changes the image in frame 5.Here is the script below from the 9th frame:
View 2 RepliesI'm trying to figure out the best way to make the text in the upper right hand corner of my photos page linkable URL...Here's the action script that's in the action layer of the file for that spirt: function loadGallery(directory, images)[code]
View 1 RepliesI want to create a notification icon like the the red one in the bottom right-hand corner of Facebook. I tried using a ToolTipManager to create a tooltip but since Tooltips appear in their own layer in Flex and, as far as I am able to figure, cannot be anchored to any part of the page. When the user uses the browser's scrollbar, they move.
View 1 Repliessometimes when I draw boxes in flash the bottom right hand corner pixel is missing.
View 3 RepliesIt looks like the "cornerRadius" property of a Panel only changes the top corners and bottom if using a ControlBar. I'd like to specify a corner radius for each of the corners individual.
I know Degrafa can do this but I'd like to avoid if possible.
I am making something flash flip like: [URL] but i want to do it in my banner 1000 width and 299 height problem is that i have few banner images i think 5 to 8 and i want to start my flip from "bottom-left" corner till "top-right"
View 1 RepliesTrying to recode a scrolling thumbnail panel I found as an example of the web into AS3 mostly for educational purposes but getting stuck in a couple of places. The panel works but my problems are:
1) lower boundary doesn't work, panel continues to scroll into infinity.
2) as it is written, the mouse event that activates the scrolling is MOUSE_MOVE, which is kind of a pain as the scrolling is kind of "jerky", I have tried to make it an MOUSE_OVER event, but I think it may be conflicting with the prior MOUSE_OVER event.[code]
I want my flash document to stay flush with the left and top of the page, but i can't figure out how.
[URL]
I designed it so that the box with my name in it sits touching the left top corner.When I test it in flash thats what it looks like. But when I up load it it moves over there.
how to force a SWF from Top left corner to the correct position.. When I tried to use a container it made the external swf not work at all, though it was in right position
WITH THIS CODE, THE SWF LOADED BUT JUST IN WRONG POSITION :
on (release) {gotoAndPlay(4);
loadMovie("gallery.swf",1);
}
then when I used a EmptyMovieClip it came in as the attachment.
Is there any other way to still use the LoadMovie() and adjust the x and y positions?
I'm making a map editor for a tile based game. The editor makes a grid:
private function draw
var tileSize:uint= 50; for(var i:int=0;i<row;i++) grid.graphics.lineStyle(1,0x000000,0.3);
[code].....
I am following this tutorial and i have got to step 9.http:[url]......I have made a file called Ship.as with this code in.
class Ship extends MovieClip[code]....
When i test the SWF nothing happens. The ship just sits in the top left corner doing nothing.
I'm using a gallery maker called "flash slideshow maker professional" , but when it loads, the hole stage goes to the upper left corner!
View 3 RepliesClick the 'download picture' button on the lower left aligned movie.url...How do they bring up a save as box for the jpeg? I have searched high and low for a solution on how to make flash save a jpeg to your computer that is stored on a server. I can make it work with a zip file but when I try the jpeg I end up linking to another page.This is the code I currently use to retrieve a zip file if anyone wants it.[code]
View 1 RepliesI put an image on my stage. Then I created a keyframe out about 25 frames. I then went to frame 25 and grabed the side of the image and drug it in. Shrinking the image by about 30%. This shrank my image from both sides. When I run it, the image shrinks from the left and the right symmetrically. Now after I did this, I clicked on the tween and said to copy as AS3. Then I went to a new layer and tied the new AS3 code to a new image dynamically. It works fine, except that it shrinks only the right hand side of the image. In other words, the images seems to be anchored on the left hand side. How can I make my dynamic image shrink from both sides in?
View 1 RepliesI put an image on my stage. Then I created a keyframe out about 25 frames. I then went to frame 25 and grabed the side of the image and drug it in. Shrinking the image by about 30%. This shrank my image from both sides. When I run it, the image shrinks from the left and the right symmetrically. Now after I did this, I clicked on the tween and said to copy as AS3. Then I went to a new layer and tied the new AS3 code to a new image dynamically. It works fine, except that it shrinks only the right hand side of the image. In other words, the images seems to be anchored on the left hand side. How can I make my dynamic image shrink from both sides in?
View 8 RepliesThis is the souce code for loading and resizing the images from an xml page. The rectangle is autimatically resizing as per the size of the image. But the problem is, in 800 x 600 resolution with small images the rectagle goes down 'coz it resizing happening in aspect ratio (width and height is proportionally changed). I want to change the height and width only downward direction. Top left corner should be fixed. How to alter this code for that.
Code:
MovieClip.prototype.resizeMe = function(w, h, id) {
var speed = 3;
[code].....
I'm sure that many of you already saw things like this ( eg: when winning at FWA S.O.T.D., you get a little "logo" and many sites have it aligned in the upper left corner), so this is what i want to do, let us say i make a MovieClip ( dimensions doesn't matter, but it's quite small ), and i want to align it to the upper left corner of the stage... The thing is that the movie/stage is set to auto-scale, so whenever i scale the browser window then that MC should "refresh" its position and stai at the upper left corner again.
View 3 RepliesI cannot find any information anywhere on how to change my layout or even the ruler layout in Flash. The stage is stuck in the upper left-hand corner of the pasteboard. If I could get the zero point of the rulers to move (like to the right and down), then I could reposition the stage, but I can't. There is no edit ruler function. The zero points are right in the upper left-hand corner together.I can't see items which I need positioned to the left or above the stage at all. Does anyone know how to change the stage position on the pasteboard or ruler layout?
View 6 RepliesI made a movie where I'm dragging a mask...
(_x = _mouse
and _x = _xmouse*-1)
you know...
but the picture that is masked appears in theupper-left corner so only quarter of the picture is in the movie...I made it the exact same way and the exact same way as the tutorial (clouds) but ......
I have a button that shrinks an icon on my screen. The problem I am having is that its shrinking to the movicelips upper left corner and need to shrink to its centerpoint. Here is a portion of my code if that helps:
[Code]...
I've checked this behaviour: If I define a sprite (by programming) as:
var square:Sprite = new Sprite();
square.graphics.beginFill(16750899, 1);
square.graphics.drawRect(0, 0, width, height);
square.graphics.endFill();
return square;
When I check the position of the sprite ( square.x, square.y), they reference the TOP-LEFT CORNER.
If I create a symbol by Flash CS4 and export to Actionscript (I also associate one class which extends Sprite for doing "new()" in my code):
var square: MyClassExtendsSprite = new MyClassExtendsSprite();
When I check the position of the sprite (x, y), they reference the CENTRE of the sprite!
In my adobe Flash CS5 when i create a new symbol it opens in a new screen as normal. the stage that I can edit it on however is stuck in the top left when I zoom out and it's starting to drive me nuts. I can't work with it like that.
View 5 RepliesWhen you create shape on stage and right click and chose create object you can chose Registration point for the object you chose what corner will be used as center of coordinates for this object. Now onice you create object is there way to change this registration point e.g. i created it in center now i want to to be in upper left corner?
View 5 RepliesWhen you create shape on stage and right click and chose create object you can chose Registration point for the object
you chose what corner will be used as center of coordinates for this object. Now onice you create object is there way to change this registration point e.g. i created it in center now i want to to be in upper left corner?
I want to learn how you can change the registration point for the Canvas.I want to make a zoom of this component, but the point registration in the upper left corner! How do I move to the center?
View 3 Replies