ActionScript 3.0 :: Load One Movie After Another From A Movie Clip?
Jun 19, 2009
Just upgraded to CS4/AS3, and I can't figure out how to load one .swf after another, llowing each to be run once, and only once. I don't think I should have to alter the target movies, as I should be ale to tell when the laoded movie is at it's last frame.So I have an string[] that holds the filenames of the target swfs to load. In effect:
movieURL = "path/to/movie.swf";
mcHolder.loadMovie(movieURL, "mcHolder") // anchor Movie in Library
while (mcHolder._currentFrame < mcHolder._totalFrames) {
if it is possible to load a movie clip into a blank movie clip?On my main timeline I have a button (mode_btn) and I want to be able to click it and load another movie clip (mode_options_mc) into a blank movie clip I have (mode_empty_mc). Is this even possible?
i wanna change color of mc. I have buttom Test and Parametri. In Test is movie testing.swf in Parametri you can change color of movie clips. in file starttesting is make like this:
in layer1 is mcPlayer. In this mcPlayer are three layers, action, container and buttoms. in action layer is this code:
How can I change color of mcOksid(testing.fla), but color will be change when i push a upload buttom? WHen i push reset buttom, the color will come back to default.
Second problem, in testing.fla in layer OKSID, i have mcOksid and mcOksid2. Know if i change color of mcOksid to blue, mcOksid2 has to be blue too.
What I'd like to do is have a checkbox, that when it is checked it loads a movie into an empty movie clip, and when it is unchecked, it loads a different movie into the empty movie clip.Also if possible I'd like to find a way to output to a variable whether the same checkbox is checked or not. And send the info from the variable in an email.
trouble getting a movie to load in an empty movie clip. I am hoping I'm missing something simple.I have a button with the instance name SPS_btn on a layer I've called buttons.Below the button layer i've got a layer called movie clips that contains an emptymovie clip called mainStage_mc.I want to load a .swf into into mainStage_mc. both the buttons and their actions occur on the first frame.I have used this code but it not working.
on (release) {loadMovie (new002.swf, mainStage_mc);
I just get a blue area but the movie does not load. I can run the movie fun locally by clicking on new002.swf file.i also tried the behaviors panel, which produces this code but it also doesn't work:
on (release) {loadMovie ("new002.swf",mainStage_mc); //load Movie Behavior if(this.mainStage_mc == Number(this.mainStage_mc)){[code]........
for some reason it will load if i use loadMovieNum () but the registration point is in the top right corner and i don't want that.What's the best way to debug this?When i use test movie the output window dosen't show an error but something's wrong.how can I test if is a path problem? A problem with the loaded movie or a problem with something else? the movie new002.swf is 393KB. I tired making a smaller 2kbmovie using the code above and it wouldn't load either.
I have a site with a container clip which all other content loads into. When one movie loads, it has a button that I'd like to be able to click to go to another page in the site (ie. unload it's parent movie and load another swf into the same container clip.
How can I address the parent container clip and tell it to unload this movie and load another swf into it?
I have a page with 8 photos that are movie clips. I'm attempting code that allows the user to click on each photo/movie clip and this loads a movie clip inside which is a larger version of the photo.
how to do this and then allow the user to click the photo to close?
I realize this is a strange way to organize photos but they laid out over a detailed photo album background.
I want to load a random movie clip from the library to an empty clip on the stage called (bg_graphics). the clips in the library are called (green, blue, yellow).
Im able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
I'm currently making an animation which will eventually exceed the 16,000 frame limit (don't ask haha), so, short of making two movies and having to just start up the next one, what is the code for loading a movie? I presume they need to be in the same directory? So basically all I want is on the last frame of the movie the code executes and the second movie file opens up and starts. I guess I'd want the current movie to close, too.
I am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
I'm creating a small drag & drop activity, and I want to be able to check and see if the dragged movie clip is completely within the bounds of another movie clip (or at least in the bounds of a certain x/y zone on the main stage. I can't use dropTest because it returns true if any tiny bit of the movie clip overlaps with the dropTest movie clip.
I also thought of something that just checks the x/y coordinates of the dragged movie clip, but I'd need this to reflect a range of values rather than one coordinate. For instance, I'd want to return true if the movie clip's x is between 50-60 AND the y is between 50-60. I'm attaching a small graphic to illustrate in case my explanation isn't clear enough [URL]
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) { _root.mouse_over_profile_btn = true; } on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
There is a bad gap in my knowledge with Event Dispatch and Event architecture, and this problem proves it. I've been getting nowhere on this problem for two days, I've posted everything to my Flash site. Go here, please: [URL] Click on "Flash Banners" The two thumbnails represent two different classes. Each class is identical. Both are "extends Movie Clip" classes. Tweeners of various types control the hover and click methods. URL Loaders load the thumnails which I then wrap in MC's and make them buttonMode = true, etc. Hover and click to load the Banners on the thumbnails.
I can't send an event from the Eagle movie clip or the T2D movie clip to tell the other to fade out. Both Banner classes are instantiated through a separate Base class. I'm sure this has to be an Event Dispatch from one MC to another and that it can't be done by the Base class. how I can send an Event or Event Dispatch and what the code structure is so one movie clip can in one class can tell the other movie clip in the other class to disappear while it's neighbour is playing. I'm happy to post code or explain / clarify anything that's not clear.
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
I created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
iam tring to make a new project , i just wants to know how to make a movie clip ( constant speed ) follows anther movie clip <--- "which can be moved by the user "
<<<>>>> i believe that this idea is good , that i records the X and Y postion of the User's movie clip and just make the other movie clip points at this postion and move toward it ,
how to make the other Movie clip (( which is a car ! .. so it have acceleration , speed , steering , etc )) go to this position or let us say try to??
Q1) The registration point of a created clip is top left - my question is how can I dynamically change it's registration point - say to center center?
(I am trying to attach a movie clip to a created clip and I wanted it to be centered inside the container - a related sub-question, how can I find the x-y coordinates of the attached movie clip within the created movie clip?)
Q2)When I tried to create two different movie clips, I found I had to create them at different depths, else the first would load and the second would not. Why would that be so? I'm on MX 2004 Pro.
I have a very simple problem but I can't find the very simple solution to it. I've create an animated menu with animated movie clips inside to work as buttons. All the main buttons work perfectely but I've got just on button with a sub-menu. On this sub-menu I've placed an invisible hitarea button in order to place some gotoAndStop action. The thing is, it seems to me like this submenu hitarea are underneath something else (even though is the seccond layers right about the actions layers). I've placed a simple trace action whenever the mouse rolls over this area but I get nothing... Am I doing something really wrong? I'm losing all my hair already.
i am trying to use the Tween class to change the size of movie clip to certain height.the code works for me but when resizing the parent, it effects the child.i tried the height and scaleY property for the thum, but does not work.
I need a basic tutorial for loading a movie clip. I have my button, I have my movie, all I need is the right AS for the job. [code]...
But the movie clip is showing off the screen. The other thing is I will have more than one movie/button...I'm looking at about 13 buttons with respective movies.
I have a swf on my home page that needs a preloader (www.brianmcurran.com). I plan to make a container swf to hold my original swf and also the actionscript for a preloader. My problem is getting the origianl swf into my container swf. Does anyone have the actionscript 3.0 to load a swf into a movie clip?
I've been having some issues with loading an swf into a movie clip. The code I'm using is this on(release){contentbox.loadMovie("contact.swf",0);}It works fine in terms of loading, but it loads the swf so that the top left corner is in the center of the content box, pushing the bottom and right part of the content way off screen.