it is masking some dynamic content that is brought in through an external swf. there is a dynamic text field and also a picture loader. whenever either one of these changes, the mask gets all distorted with holes/lighter areas in it.
View 1 Replies
I'm loading images into an otherwise empty MovieClip called container_mc using UILoaders and spacing them horizontally. I also have the image names as TextFields below the images all within the container. I'm masking the container clip using the following syntax:
container_mc.cacheAsBitmap = true;
mask_mc.cacheAsBitmap = true;
container_mc.mask = mask_mc;
This USUALLY works, but for some reason when I load over 20 images into the container -- the mask no longer works. At first it appears as though it's working but then the text disappears and when I mouse over the images to scroll them horizontally, the mask (which is magenta) appears and disappears -- flickering strangely. Should I be caching? I was under the impression I had to for the dynamic text to show up. Maybe it's the where I placed the code (load-order)?
I have tiled map made of dots. Each dot is interactive.In order to facilitate smooth scrolling over the map I want to be able to mask it as you would a regular image, then drag the masking window to reveal new areas.
The problem I have is that the mask only hides whether you can SEE the underlying map. So, when the cursor is outside 'visible' map area it's still interacting with the hidden portion of the map.
I'm just starting out with AS3 and this is what I'm trying to do:
1. I have an external .swf banner which is 900x250 pixels
2. I want to load this .swf into my main project, using this code:
var myLoader:Loader = new Loader();
addChild(myLoader);
var myRequest:URLRequest = new URLRequest("ptp.swf");
myLoader.load(myRequest);
3. The problem is that the .swf banner that is being loaded has content 'outside the stage' so instead of just showing the 900x250 area I see all the off-stage content as well.
How do I 'mask out' the off-stage content of the loaded .swf so that it will be only the 900x250 that I want?
I've got an object in the library that's a basic rectangle with an outline. A for loop creates a grid dynamically. I want to create a mask that goes over this grid. I'm using "my_object.mask = my_mask", but to no avail
View 1 RepliesIs there a way to immediately terminate the loading on an external swf and the loading of that external swf's dynamic content? I've tried the code below in the parent swf, but no success. The external swf's dynamic content continues to load.
View 2 RepliesI'm creating a playlist for a music player, and I've got the song names displaying correctly in my songTitle holder MC, but there's limited space for the song names to be shown in, and I'm going to eventually have it inside a scrolling movieclip. Problem is, the text inside the textfields disappear when I try to add a mask to the movieclip they're being loaded into. I've tried adding all combos of embedFonts, antialias, and blendModes I ran into, to no avail.how to mask dynamically created textfields with a non-dynamic (Flash IDE-made) mask.
Code:
for (var i:int = 1; i <= _size; i++) {
var pl_artist:TextField = new TextField;
//all embedFont = true and antiAlias commands no workie
}
I've been having some trouble with this code:
Code:
onClipEvent(load)
{
_root.stop();
dO = 3.6;
r = 75;
[code]....
I've created a movieclip with a donut graphic.Set the actionscript to the clip. Created a 2nd frame in the timeline with a photo.Nothing happens.
I can't get this code to work. Is this complete?
[URL]
Code:
onClipEvent(load)
{
_root.stop();
[Code].....
Ok so I'm trying to make a navigation system that is loaded from an XML file and has sub menus. Trying to do it ALL in AS. I don't have any symbols in my library except for the embedded font. Now, sometimes I need to mask something, is it possible to use a dynamically created mc to mask another dynamically created mc dynamically oh, did I forget to say dynamically?? Ok so let's use this as an example, two boxes. One orange, one purple.
Code:
mask = createEmptyMovieClip('orange', 1);
mask.moveTo(50,22);
[code].....
I draw a shape with the AS3's drawing API, then I draw another shape that intersects the previous shape, both the shapes have fill in them, but the intersecting area does not have any fill. I am not able to manage the "direction" that the shape is drawn in. what I need is for flash to just fill everything up to the outer borders of all the shapes, how would i achieve this? I found this forum thread that has almost the exact same problem that i have, but it is not resolved. [URL]
View 4 RepliesI have a 8x 10 array of mcs on stage each which contains a small image. So, there are 8 parent clips (columns) each containing 6 child clips containing the thumbnail images. If the movie clip arrays are created dynamcally (therefore loaded into the top layer) how can I mask them? I'd like to be able to mask 1 vertical (parent) column at a time (so only 1 of the 8 columns (6 images) is visible.
View 14 RepliesAnd my problem isn't the mask but the dynamic text is not loading from the XML file anymore.I think this is because in the tutorial the first thing you do is make the dynamic text field a movie clip. As soon as I do that the text data doesn't load from the external XML file. The code that previously worked was:_root.prompt = this.firstChild.childNodes[1].firstChild.nodeValue; prompt_txt.text = _root.prompt;But now I made the dynamic text field prompt_txt a movie clip named prompt_mc and it doesn't load. So I realize now that prompt_txt lives inside prompt_mc but how do I get the text data from the XML file there???
View 4 RepliesI'm loading 10 jpg images into _root.content.section_4.mc_anim, each is placed into its own movieClip.
Code:
_root.content.section_4.mc_anim["gall_img_"+img_view_index]
These movieclips are hidden and then have the images from an array loaded into them.
[code].....
I'm loading an external image to use as part of the background for each section (other section, new external image). But that image needs to be animated in, in a certain shape (I have created a kind of spatter animation).I always use an Movieclip container to place my external images. So on one layer I have this container clip. I mask this layer with a layer on top of that one, which has the splatter animation (this splatter animation is not a movieclip, just some keyframes with the animation).Everything works, except that the image is not loaded. I checked everything, maybe I put the wrong url or something. But nothing.
So I tried unchecking the mask option. Ok... now my image did load. But as soon as I check the masking of that layer, again I'm left without image.It seems to me that it has problems with loading images that are begin masked. How can I fix this? I tried google'ing, but few solutions were found. And I'm nog programer-guru. I use flash semi-design/semi-program.
I cannot get dynamic text fields to display when using a mask. Here is what I have done: Created a new Font object in Flash - Linkage: Export for Actionscript , class: Euro
[Code]...
what I am doing is making an XML menu for a website. Each button has a background and and over-state background. The backgrounds are 9 sliced scaled movie clips, well the over-state background is set up to mask an animation movie clip that is larger than any button will be. The mask is 9 slice scaled and is always the same size as the regular background. These backgrounds are x-scaled in a function in the Button.as. The title passed in through the XML determines the width. All of this so far works perfectly.
Now a navigation movie clip processes and adds all of the button movie clips based on the amount of nodes in the XML, this also sets the X and Y coordinates as well as sets a "spacer" between the buttons. Here is my problem, every time the function runs to create a new button, it sets the x value at:
Code: Select allbutton.x = this.width;
This is great if I don't use the mask though. What happens since the movie clip I am masking in the over-state background is wider than the buttons are is that there is wayyy to large of a gap. When each button is added, actionscript sees the width of the button with everything in it, masked or not. So I've tried a for-loop in the button creating function to increment a number variable from 0 - the max number of buttons in the XML. I then want to set the x value to:
Code: Select allbutton.x = (button.background.width * i);
This is the background of the button that has the correct width that actionscript should be using. By multiplying it by the i variable, it should move the x right with every button. Unfortunately it's not working.
I am creating a photo gallery using xml and a thumbnail bar at the side. I want each picture to fit into a square without distorting the image, so I will need to use masks. Currently I am using the loadClip metohd for loading pictures then I am attempting to use onLoadInit to dynamically set the masks. It is hard to show the problem on here so I have here's the link..[URL]...
It seems that you can't place "i" values in the onLoadInit part which I tired previously, atm I can only get one to work as you will be able to see.
In my current project I'm building a waterfall. Each drop in the waterfall is generated from the waterfall.as class and added to the stage via addchild. Now I have a mask that I want all of those drops to use however I can't seem to get this to work. I've tried placing the mask on the timeline and I couldn't seem to access the mask from the waterfall.as file. I've also given the mask it's own class and added it dynamically to no avail.
View 7 Replieshow it is possible to edit dynamic content and modify the content and save it, all within flash.I have tried some experiments in the past and have got the text to change etc which is easy but i need a way to save the content so the next time anybody sees the flash it will have the latest content until i change it again.
View 2 RepliesI am loading a swf into another swf. The swf I am loading has objects off the stage, and when i load the swf into the other it shows the objects off the stage and screws up my positioning logic. Is there any way to load the swf and hide all the objects that arent on the stage?
View 1 Repliesmaking an XML menu for a website. Each button has a background and and over-state background. The backgrounds are 9 sliced scaled movie clips, well the over-state background is set up to mask an animation movie clip that is larger than any button will be. The mask is 9 slice scaled and is always the same size as the regular background. These backgrounds are x-scaled in a function in the Button.as. The title passed in through the XML determines the width. All of this so far works perfectly.
Now a navigation movie clip processes and adds all of the button movie clips based on the amount of nodes in the XML, this also sets the X and Y coordinates as well as sets a "spacer" between the buttons. Here is my problem, every time the function runs to create a new button, it sets the x value at:
Code:
button.x = this.width;
This is great if I don't use the mask though. What happens since the movie clip I am masking in the over-state background is wider than the buttons are is that there is wayyy to large of a gap. When each button is added, actionscript sees the width of the button with everything in it, masked or not. So I've tried a for-loop in the button creating function to increment a number variable from 0 - the max number of buttons in the XML. I then want to set the x value to:
Code:
button.x = (button.background.width * i);
This is the background of the button that has the correct width that actionscript should be using. By multiplying it by the i variable, it should move the x right with every button. Unfortunately it's not working.
I'm loading one SWF into another but the internal one is coming over the main content and that can't happen.here is the part of my code where the external content is being loaded anyone hason what I can do to fix this? here is my code:
Code:
var loadAnimBox:Loader = new Loader();
var vid_mc:MovieClip;
[code].....
when adding a mask to a parent sprite with a dynamic text field, the text loses anti-aliasing. how can i maintain the text's anti-alias while still applying a mask to its parent, and subsequently to itself.the font is embedded, and the text field will be animated so it must also be masked along with its parent.
package
{
import flash.display.Sprite;
import flash.display.Shape;
import flash.text.*;
[code]....
how to load external swfs into the an MC content box using movies with embedded buttons?the problem i'm running into is this: i have animated buttons within movie clips. i also have a main_content MC in my scene into which i'm trying to load background images from another file. this other file has 3 frames, each with a different image.i don't know what the action script would be for a movie/button to load my external swf frames into the main_content MC.
View 1 RepliesI'm importing text via an XML file that will then be displayed in a dynamic text field. The text is about 1 sentence long but one of the words in the sentence must be bold and a different color. So I've added some HTML tags in the XML node to change the color and format but when I test the file the html tags show in the dynamic text field and the text is NOT formatted.[code]Am I not using the CDATA tag properly? Or do I need to change something in the way I call up the data in the xml node?
View 3 Replies1. Is the video brought it to the Library them placed as an movie symbol?
2. I know you can knockout a background with Chroma-Key, but what format does flash use to acknowledge the transparency.
3. Is there a way to cut out the figures from a video in flash?
I have an html text being brought in from XML to a dynamic text field. The html text has a <br> in it. I need an If statement that can detect if the text has the "<br>" in it or now. How do I do that?
View 8 RepliesI am creating a flash banner using a layered psd. The account team is happy with the look of the psd. BUT, when I bring the images into flash and publish the file, the colors look different. I import them into flash at the highest quality yet they don't look the same.
View 5 RepliesIs there an event dispatched when a modal is brought to the front in Flex? Basically there are two times when I would want to listen for this event: When the modal is first created (although in theory creationComplete / show / etc.. could suffice here). When the user brings a modal that is not in the front to the front by clicking on it. In my case the popups I am working with are descendants of TitleWindow and listening for focusIn does not seem to work reliably.
View 3 Replies
