I have a movie clip that contains sound (I tried sound by code and sound in the time line) and when I go to next frame and back to it the sound plays without the movie content, and notice that I put stop action in the firest frame and the sound is not event type it is stream typeto stop the sound from playing, I do not wnat it to play unless I played the movie clip it contains.
View 1 Replies
assuming my movie clip is named "movie"
View 2 RepliesI would like to attach a sound to a movie clip that is serving as a button.
I want the movie clip button to make a little noise when the mouse rollovers it.
I am using Flash MX.
Movie Clip ActionScript For Roll Over Sound?? have Done this tutorial And i was wondering if anyone could tell me the ActionScript for sounds effects when you roll over it?
View 3 RepliesI have multiple movie clips with different sounds in each movie.
My movie clips are placed across the main timeline of my movie.
I have a "Next" and "Back" button on the main timeline that jumps me from frame to frame where each movie clip is placed. Everything works great.....but my sounds from the movie clips are running together.
How do I stop all sounds in a movie clip from the main timeline when I click either the "Next" or "Back" button.
I have a background sound on the main timeline and I do not want to stop this sound.......so the StopAllSounds function is not working for me. I just want to stop the sounds in the Movie Clip when I click the "Next" button.
I have a sound clip called "wing" in main time line. Inside main time line I have movie clip called "shell" inside that another movie clip "perform" inside that have another movie clip "engine" with a sound clip "panel"
how do i stop playing only the panel sound clip
I have a frame with a quiz question and three answer options. The three answer options are movie clips. Their instance names are q1_soundA, q1_soundB, and q1_soundC. I want each option to make a different sound when rolling over them. My sounds are already in the library and they have been linked: each one has a unique identifier (a, b, and c) and "Export for ActionScript" and "Export in first frame" are checked. Under frame properties, sound is none, sync is event, and repeat is 1.
I have a separate layer with the following code in the first frame (the quiz question is in the second frame):
var snd_a = new Sound();snd_a.attachSound("a");
var snd_b = new Sound();snd_b.attachSound("b");
var snd_c = new Sound();snd_c.attachSound("c");
[Code].....
Note: I also have three transparent buttons underneath each movie clip. I am using these buttons and some code to record the answers and calculate a score. This part is working fine though.
Problem: As soon as the quiz question frame is displayed, the first sound is played over and over again even if the cursor is not even close to any of the option answers. It doesn't matter where I move or click, the sound keeps playing all the time.
i'm trying to add a rollover sound to a movie clip. i've read a bunch of tutorials but I can't seem to get it working here is the code for the first frame of my movieclip:
stop();
this.onEnterFrame = function(){
if(rewind == true){[code]....
I did a search through the forum and thought I found what I wanted, but in the end couldn't get it to work, so basically all I need is to trigger a sound when the mouse cursor is over the "over" / "out" state. Since I have animations to the buttons, I already have this existing script working fine, just need that extra line of code to add sound to the certain state, but I couldn't think of it off the top of my head:[code]
View 2 RepliesI'm trying to figure out how to add a sound to a movieclip button so when the user clicks on it a sound is played.
View 10 RepliesI'm trying to make a program for an e-commerce project I'm involved in that will allow our users to listen to sample clips from a given CD. I've listed all the tracks in an array called trackList. Here's the code to play a given track from that array:
function playTrack(event:MouseEvent):void{
switch(event.currentTarget.name){
case "track01":[code]....
The event target that I've bolded is the given movie clip button that the user has clicked; at frame two, the button turns yellow. When the clip is finished, the button should return to frame 1, but I can't get that to happen.
I suspect I need to put the event listener to make the button's color change back on the sound channel (sndChan), but I don't know how I could write that function so that it will apply to which ever button happens to be active.
Is there some codes, to stop sound in movie clip, when changing keyframe on main (parent) timeline ?
View 1 RepliesDrag and drop game. I'd like the instance to tint red when rolled over after it's been successfully dropped. I'd also like to play a sound file when clicked after successful drop. Here's the code:
ActionScript Code:
addEventListener("dropped", dropper);
function dropper(e:Event):void {
[code]....
Im able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
View 17 RepliesI am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
I'm creating a small drag & drop activity, and I want to be able to check and see if the dragged movie clip is completely within the bounds of another movie clip (or at least in the bounds of a certain x/y zone on the main stage. I can't use dropTest because it returns true if any tiny bit of the movie clip overlaps with the dropTest movie clip.
I also thought of something that just checks the x/y coordinates of the dragged movie clip, but I'd need this to reflect a range of values rather than one coordinate. For instance, I'd want to return true if the movie clip's x is between 50-60 AND the y is between 50-60. I'm attaching a small graphic to illustrate in case my explanation isn't clear enough [URL]
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
i am making a pacman game, and i need to know how to make it go to a certain scence when a movie clip collides with another movie clip.
View 2 RepliesThere is a bad gap in my knowledge with Event Dispatch and Event architecture, and this problem proves it. I've been getting nowhere on this problem for two days, I've posted everything to my Flash site. Go here, please: [URL] Click on "Flash Banners" The two thumbnails represent two different classes. Each class is identical. Both are "extends Movie Clip" classes. Tweeners of various types control the hover and click methods. URL Loaders load the thumnails which I then wrap in MC's and make them buttonMode = true, etc. Hover and click to load the Banners on the thumbnails.
I can't send an event from the Eagle movie clip or the T2D movie clip to tell the other to fade out. Both Banner classes are instantiated through a separate Base class. I'm sure this has to be an Event Dispatch from one MC to another and that it can't be done by the Base class. how I can send an Event or Event Dispatch and what the code structure is so one movie clip can in one class can tell the other movie clip in the other class to disappear while it's neighbour is playing. I'm happy to post code or explain / clarify anything that's not clear.
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
it seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 RepliesI created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 Repliesiam tring to make a new project , i just wants to know how to make a movie clip ( constant speed ) follows anther movie clip <--- "which can be moved by the user "
<<<>>>> i believe that this idea is good , that i records the X and Y postion of the User's movie clip and just make the other movie clip points at this postion and move toward it ,
how to make the other Movie clip (( which is a car ! .. so it have acceleration , speed , steering , etc )) go to this position or let us say try to??
Q1) The registration point of a created clip is top left - my question is how can I dynamically change it's registration point - say to center center?
(I am trying to attach a movie clip to a created clip and I wanted it to be centered inside the container - a related sub-question, how can I find the x-y coordinates of the attached movie clip within the created movie clip?)
Q2)When I tried to create two different movie clips, I found I had to create them at different depths, else the first would load and the second would not. Why would that be so? I'm on MX 2004 Pro.
I have a very simple problem but I can't find the very simple solution to it. I've create an animated menu with animated movie clips inside to work as buttons. All the main buttons work perfectely but I've got just on button with a sub-menu. On this sub-menu I've placed an invisible hitarea button in order to place some gotoAndStop action. The thing is, it seems to me like this submenu hitarea are underneath something else (even though is the seccond layers right about the actions layers). I've placed a simple trace action whenever the mouse rolls over this area but I get nothing... Am I doing something really wrong? I'm losing all my hair already.
View 2 Repliesi am trying to use the Tween class to change the size of movie clip to certain height.the code works for me but when resizing the parent, it effects the child.i tried the height and scaleY property for the thum, but does not work.
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[code]....
I use Flash MX 6.0
1) I have a button and when I put cursor over it, it must start looping a sound. When I drag away, the sound must stop. I would be even cooler if it was possible to make the sound fade away when the mouse is rolled away. I have no problem creating another sound file that fades my current sound away.
2) I have a button which represents a knife, that should stab something (a panel) once pressed. So fist the knife must be clean. but after one or more presses, the blood should remain as a movie clip (as I want to animate the dripping blood)
3) once rolled over a button, the sound must start looping (as I wrote in 1.) AND the knife should slowly go backwards (MC). BUT when I roll mouse away, the sound fades away (as in 1. again) PLUS the knife should slowly move back to its place in stead of just jump from one place to another.
I've imported 9 .mov files in my flash presentation. Each lasts for about a minute, and the language is english. I have translation of each video clip in Serbian language as .txt files. And now i need that text to go below the movie clip simultaneosly with the voice in movie clip. And for example when i press pause,the text stops,and when i resume it,the text goes again.
View 1 Repliesit isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 RepliesI have in my root:
1 Movie Clip instancied as a "cursor" 1 Movie Clip instancied as a "Mc_Obstacles" with others 5 Movie Clipsand the 5 Movie Clips inside the "Mc_Obstacles" are instancied as "Obstacle" , all with the same instance...I want this: when the mc "cursor" hit one of mcs "obstacles" gotoandstop to frame X then i did in frame with actions in another layer:
cursor.onEnterFrame=function(){
this._x=this.x+10;
if(this.hitTest(Mc_Obstacles.Obstacle)){
gotoAndStop(4);
}
}
