ActionScript 3.0 :: Push Value In Index 0 In Array?
Jan 18, 2012
I am creating a row which have 8 thumbnails in it, I save these in a array, When user drag row right to left then first Movieclip shift to last position, then i splice array 0 index and push to last position.. it works fine but when i drag it left to right then I need to cut last index of array and i need to push on first position, but it is overwrite the last value of array and after push the value(myrow[0]=thumb) array showing it's length 7 before it was 8. What is the right way to push value at 0 index value
View 2 Replies
Similar Posts:
Nov 12, 2009
I have a class in which I have declared an array. The functions in that class are designed to make changes to the array, but it's not working:
[Code]...
Anything I do to customerCheck treats it as if it were a new array. This is especially obvious when using customerCheck.push in addCharToCheck() -- the trace always shows a blank array before push and an array with one object in it after the push... then next time it does the same. I know I'm making some sort of fundamental error regarding the scope of the array within the class but I just cannot find any good information on how to fix it! Moving to AS3 (been coding it for all of about 3 weeks) is a nightmare so far, and it seems to be the 'easy' stuff that causes me problems
View 6 Replies
Aug 16, 2011
I think it would be simplest to explain it like this:
[Code]...
View 1 Replies
Jun 22, 2011
So, for sending to individual streams we have to reference the connected netStream we want to send to in some way like this:
sendStream.peerStreams[0].send("MyFunction",param1,param2);
and I have to determine which peer I'm sending to by their ID such as "peerID1234"
I know that you can check the peerID of the stream by doing:
sendStream.peerStreams[0]["farID"]
how can I make my send stream function know to use the array index where the peerID is?
so basically it could be like:
sendStream.peerStreams[where peerStreams[]["farID"] == peerID].send("MyFunction",param1,param2);
View 1 Replies
Mar 16, 2006
I've been trying to move array elements from one array to another using the push method. The problem is that the element pushed should any longer be on the first array where it was taken from. That's where i'm stuck..
[Code]...
View 5 Replies
Mar 14, 2005
I have 4 buttons and an empty array. When a button is clicked,I'm adding a element to an array with array.push. However, I want to check the array 1st to see if that element exists. If so, then don't add it. Here's what I have thus far
[Code]...
Now I'm taking it I'd have a conditional statement to see if the element already exists. Unfortunatly I cannot just disable the button. I searched the AS dictionary but oddly enough it doesn't have an easy way to search an array. And IndexOf seems to only work for a string.
View 3 Replies
Jan 7, 2009
I'm having an issue with pushing the node contents of my XML to an array. I'm real close and have tried a ton of things, but I'm hoping to get a push here.. The below code works fine, but is limited to 22 chars... I'd like it to parse the node regardless of length by first calculating the length and then looping through the push based on that int (tileWidthNumber). It's important to ignore the commas from the node, and the push each value to the myMap array.
View 4 Replies
May 4, 2011
way to duplicate an array and then push it into itself?
Do I need to use concat or is there a way I can keep the original array ?
View 11 Replies
Feb 9, 2009
I can push into an array just fine, but now I have an array created by a for loop. It has 30 numbers in it.
Now I want to go back and add another dimension to each element in the array.
So I might have (1,2,3,4,5,6....)
and I want to go back and add ([1,"Susan"],[2,"Matt"],[3,"Marc"]... I read somewhere that I need to loop it and first make each element and array and then push into arrayName[0].push as a loop, but that doesn't seem to work either.
View 4 Replies
Mar 19, 2010
I would like to push a value, anything really, into my array when my movieclip is pressed. I have a number of fish movie clips, and when I press them they unload, but I would like for every press of the movie clip instance a value to be pushed in the array. This is so that when a certain number of fish have been pressed the movie goes to the next frame. So, I give an if statement to say if the array has a certain length, go to nextFrame();.[code]
View 9 Replies
Jun 22, 2011
I am trying to put a series of numbers into an array. Here is the section of code.
myArray = newArray();
num = randRange(1, 4);
//trace(num);
for (var i = 0; i<6; i++) {
addon = randRange(1, 5);
[Code]...
View 1 Replies
Feb 12, 2008
I have my xml coming in just fine and I need to put it into an array now..I need it to basically end up like one of these:
Code:
var contentInfo:Array = [{title:"Select a Ringtone", keyID:"", keyName:"", fileID:""}, {title:"Living Together", keyID:"17117", keyName:"circa.ringtones.livingtogether", fileID:"1769_w_a18cwob6.mp3"}, {title:"The Greatest Lie", keyID:"17119", keyName:"circa.ringtones.thegreatestlie", fileID:"2026_w_i2hdaw10.mp3"}, {title:"The Difference Between Medicine and Poison is the Dose", keyID:"17120", keyName:"circa.ringtones.thedifferencebet", fileID:"2025_w_yskkb1oc.mp3"}];
so you can see their are 4 variables I need to push into one slot.
View 1 Replies
Feb 7, 2010
Got another problem here I just try to load images from a small xml-list and put them into an array, but I only get a message like this: TypeError: Error #1009: Cannot access a property or method of a null object reference. at thumbHolder/placePics() It really tells me nothing! What am I doing wrong? the code is here. I put a comment where the problem is (I left out the imports & stuff):
[Code]....
View 3 Replies
Jun 5, 2004
PHP Code:[code]..............
In the 1st and 2nd lines of the function I would like to somehow combine the value of the answer function (either "YES" or "NO") with the string "Array" so that it is read as "YESArray" or "NOArray" so that i can use that to push a value into those pre-existing arrays.INSTEAD of running the "IF" statement code I have commented out.
View 2 Replies
Nov 30, 2010
I have declared an Array as a new Array(); I would like to push objects into that array but have a text field read back the array minus the commas that are pushed by user interaction (from numbered buttons).
For example, if the user pushes button 1 then button 4 then button 8 I would like the array to read in the text field 148 instead of 1,4,8 .
View 7 Replies
Feb 15, 2011
I have used a method to shuffle a part of a Array, but i noticed that it does not work very well.When i run this method I sometimes get empty array values.So if you would try the example below and test it out some times you would get a right result but sometimes a wrong result.For example when i run this i get in my trace output:
a,b,c,d,g,,e,f (here after the g it goes wrong)
a,b,c,f,g,d,e (here it goes right)
a,b,c,d,,g,f,e (here it goes wrong)[code]...
View 8 Replies
Jan 15, 2010
I am trying to build a flash game using AS3. I have a container named "enemy", and within that container I have a movie clip named "sonar". The movie clip sonar has roughly 600 symbols within it named "blip####" with the #### representing an individual number. I need to push each one of these blip symbols into an array so that I can later refer to them in a hit test. I have tried blipArray.push(enemy.sonar.blip####); andlipArray.push(Object(enemy.sonar).blip#� but neither of them work. When I try running the hit test the error I get is "TypeError: Error #1010: A term is undefined and has no properties."
View 2 Replies
Feb 7, 2010
I just try to load images from a small xml-list and put them into an array, but I only get a message like this: TypeError: Error #1009: Cannot access a property or method of a null object reference. at thumbHolder/placePics() It really tells me nothing! What am I doing wrong? the code is here. I put a comment where the problem is (I left out the imports & stuff):
[Code]...
View 7 Replies
Aug 17, 2010
How would I go about as to addEventListener for a array object. I'm trying to avoid running a timer every x milliseconds to check for new elements in array object, rather trying to make a event fire when new elements are detected to process them and remove them. Is it possible with Arrays? maybe ArrayCollections? either is fine.
View 4 Replies
Apr 2, 2011
what I'm trying to do is to get 4 movieclipps (leaf1, leaf2, leaf3, leaf4) to play the sound that is attached to them when is dragged onto another movieclip (NatureTarget) and the play button is pressed so that the sounds are played in the order they are dragged on. I know I need to use an array and the push function and a loop...
View 1 Replies
Jun 21, 2009
I have two arrays on my Globals.as document:
ActionScript Code:
public static var special:Array = [];
public static var ground:Array = [];
public static var playertouchme:Array = [];
I go to push an object onto one of the arrays:
ActionScript Code:
Globals.special.push( this );
That works fine. However, when I replace it with:
[Code]....
I get this error:
[Code]....
View 4 Replies
Jul 12, 2010
How do I push an entry into an associative array?
ActionScript Code:
var lijst:Object = new Object({fname:'John', lname:'Carpenter'});
lijst.push({mname:'Frank'});
[code]...
This doesn't work. The first name and last name work because they are created when the object was created, but the pushed middle name remains undefined.I understand that associative arrays are in fact objects. I tried turning it into a real array so the Push command would work cause it's part of the Array Class.
ActionScript Code:
var lijst:Array = new Array({fname:'John', lname:'Carpenter'});
lijst.push({mname:'Frank'});
[code]....
Though this works, it only works when using a '1'. When in fact I want to keep it inside the '0' entry.So how do I really add an entry into an assciative array? So that in above example instead of each having two elements one is added resulting in three elements per entry?
View 5 Replies
Mar 10, 2009
Is it possible to push a string to customItem array, and then change it at runtime and have the ContextMenu reflect the change? I have a Fullscreen item in my menu, want to be able to change it to normal when the display state == full_screen.
View 2 Replies
May 6, 2004
hey, I was wondering if there's any way to push a copy of an object onto an array without having to create a seperate variable for each object.
For example- in c, i'm used to doing something like having a 'temp' object- and then in a loop i would set the value of the objects members and push it on to the array (vector). If i try to do something like that in flash though, it stores a reference to that object in the array, so every time it changes every new element in the array changes to have the latest values of the temp object.
Without using as2.0 classes (i.e. just mx style) is there any way I can get the effect i'm trying to get here- just have one instance of an object that i can redefine in a loop and push a copy of it into the array so that i wouldn't have to declare a separate variable for each one which would defeat the purpose of the array.
View 2 Replies
Nov 9, 2005
I've looked in the documentation and found nothing. I'm in MX 2004 pro.
here's my code:
Code:
var arrayName = "name";
trace(arrayName);
var numberofPics = arrayName.length;
[code]....
when it gets to the 'trace("shifted = " + shifted)' it comes back as "shifted = " when it gets to the 'trace("ordered pic is " + shifted)' it comes back as "ordered pic is " so is it just that a variable can't be used as the name of an array when using shift and push?
View 4 Replies
Mar 23, 2010
i have been racking my head for days over random number no repeats
iam doing a bingo caller game iam stuck with random number with no repeats this is the code snipplet im using
Code:
var num:Number = Math.ceil(Math.random()*90);
i use the timer class to call a number every few seconds
how do i do it with no repeats,
do i have to put the numbers into a array then pull the numbers from the array, here is some code i have found but can't get it to work
Code:
var firstarray:Array = new Array();
for(var u:Number = 1; u <= 90; u++){
[Code].....
View 5 Replies
May 6, 2004
push a copy of an object onto an array without having to create a seperate variable for each object.For example- in c, i'm used to doing something like having a 'temp' object- and then in a loop i would set the value of the objects members and push it on to the array (vector). If i try to do something like that in flash though, it stores a reference to that object in the array, so every time it changes every new element in the array changes to have the latest values of the temp object.
Without using as2.0 classes (i.e. just mx style) is there any way I can get the effect i'm trying to get here- just have one instance of an object that i can redefine in a loop and push a copy of it into the array so that i wouldn't have to declare a separate variable for each one which would defeat the purpose of the array.
View 2 Replies
Dec 17, 2010
I obviously don't understand arrays very well. I want to cycle through the content of an array by the push of a button. The dynamic text field registers the variable "aar", because when I preview this it displays "item1". When I then hit the button, the variable "i" is increased by 1, the dynamic field with the variable "i" shows this, but the dynamic field with the variable "aar" is not updated to the next array-item. This code is in the first frame, with no stop(); code in the file at all.. Why doesnt this code work?
Code:
aar = new Array();
aar[0]="item1"
aar[1]="item2"
aar[2]="item3"
[code]....
View 2 Replies
Aug 10, 2007
I have been working with flash remoting in actionscript 3.0 and there is no result set class. I'm fairly new to AS3, but I am very fluent with AS2, and so far the migration has been easy.I would like to create a result set class myself, but I am stuck on one part, pushing the dynamic number of elements onto the array, let me show you what I mean:
{ // start result function
var totalCount:Number = rs.serverInfo.totalCount; // # of records returned
var queryString:String = rs.serverInfo.intialData; // query string, each value separated
[code].......
View 5 Replies
Mar 9, 2011
I have a variable call php_variable that loads from the php. It echos all the necessary variables. I have 2 array, Tel_start and Tel_area. The messages.text is just a text field I use to test if things are loading properly.
[Code]...
It display the correct string. But when I use Tel_start[0] like above, I got undefined. So here, the actual quesetion, what's the proper way of storing those variables and displaying it?
View 9 Replies
