How do I restrict a mc to a certain area of the stage? I am going to have some buildings on the top of my stage and I don't want my character to be able to walk past the street level.So basically I don't want him to be able to go off the stage or up some to be determined height.
View 6 RepliesHow I can restrict actions to the stage? I have objects that float dynamically when I move the mouse over the stage. If I publish my file as html and click on the area surrounding the stage the objects move...
View 2 RepliesAs this involves assorted dragging interactions to understand this explanation take a look at the file.URL...it should work like the last item on this page, called exploring kite interactive Url...I have a mc which includes 5 dots that can be dragged in various ways.each one needs to be limited to the stage area when it is being dragged.The limit should only apply to the dot when being dragged. If a dot being dragged causes another to exit the stage area that is fine.I have tried a few ways, none work too smoothly.One issue is that a dot which stops dragging at the edge can be hard to pick again.Another issue is that if you drag really fast you can drag a dot offstage. This is usually when the top or bottom dot is dragged quickly from where it has stopped at the edge and the mouse is released just outside the stage.FLA is attached.
View 7 RepliesI have need to restrict user input. TextInput should restrict all special characters and punctuation. Any other characters are allowed. In java there is a regex patter:
replaceAll("\p{Punct}", "_")
Is there something similar in actionscript?
to be loaded by just one .html ??I have one book which was converted page to swf. Each swf will be inside one .html, pag1.html contains pag1.swf, I'd like to avoid the direct url reference to pag1.swf.Any way of detecting the URL of html the swf file is embedded in?
View 3 RepliesI'm having trouble with the new keyframing model in Flash CS4.Say I have a symbol that starts here, then moves over there, then waits, then moves back over there again, etc. etc.Using the new model, all of these movements seem to be considered the same and single tween.If I apply easing, the easing affects the entire range of keyframes. This doesn't make sense? I may want the symbol to slow down when it gets "there" and have different easing for different movements. Does this make sense?
View 1 Replieshow can I restrict an input box to only accept the numbers 1,2,3,4 or 5 but nothing else.
View 2 Replies[URL]
If you drag the map, it moves even beyond the edge of the map so the map eventually gets dragged off the screen. Is there any possible way to stop the map moving any furthur than its boundry?
The source is here - [URL]
I know how to use .restrict() to restrict or allow characters in a textfield, but how to I restrict just a double quote? "I tried with the two backslashes but that does not work.My only option seems to be to ALLOW a whole lot of character sets but leave out the double quotes. Is that truly the ONLY way?
View 2 RepliesHey, can I restrict a certain string within a textfield?
if(textfield.text == *"****"*)
{
}
type of thing?....
is it possible to make a Flex-application to only run from my domain? So a user can't copy the .swf and start it locally.
View 3 RepliesI need to restrict the user and allow only first character as + or - or 0-9 and other character as 0-9..how can i do this in regular expression validator the below expression works but i need in restrict field.
<mx:TextInput id="txtTop" restrict="[0-9+-][0-9]*$" />
[Code]...
this is my code ..
import RegExp;
var userEmail:String;
var userName:String;
var userPhone:String;
how to restrict my userPhone:String; to take only numbers?
i tried the restrict property. the compiler gives me error.
i want to restrict the input to numbers only, but do have a problem for an empty entry:
now accessing like this:
var newValue:Number = event.itemRenderer.data[event.dataField]
newValue is now for an empty entry not null, but 0...
I use a TextInput component of Flex 4.5 to enter some text in English. I use the restrict attribute to ... restrict the keyboard input to characters a-zA-Z only. The problem is that if i copy/paste a word in another language, i can then paste it into the TextInput component. Is there a way to avoid that? If no, how can i validate the input against a specified language?I found out that the unicode set of Chinese+ language symbols is u4E00 to u9FFF. So i write the following:
var chRE:RegExp = new RegExp("[u4E00-u9FFF]", "g");
if (inputTI.text.match(chRE)) {
trace("chinese");[code].........
How can I use restrict option of the TextField class with other languages?[code]...
How can I use it to enable to add just basic punctuation characters for example for hebrew or for so cyrilic languages taht use UTF-8 encoding?
I have a graphic of a computer with a mouse that is a movieclip and I am wondering if it is possible to be able to move the movie click about by clicking and dragging on it but I want to restrict the mouse to a certain space so it doesn't float off the table.
View 1 Repliesive made an object which can be moved by the user with the arrow keys but you can make it go off screen
View 5 RepliesI have made a setInterval(countdown,100); for time and in countdown it is like
function countdown() {
time = time-0.1;
}
When I trace it after some seconds it shows seconds like "50.9999999999" I am just reducing it to 0.1 then why it is showing upto that much decimals?
How can I reduce it to 0.1 decimal so that it calculates "50.9" instead of "50.9999999999" ?
I want to have a webcam site where a user can broadcast their webcam and people can view it.
ActionScript Code:
netstream.publish("broadcast");
This was pretty easy to do.
The problem seems to be that anyone can broadcast over any netstream.
would someone be able to hijack a users broadcasting netstream?
could you publish through a php file to confirm sercurity?
ActionScript Code:
netstream.publish("http://example.com/netstreampublish.php?room=broadcast");
PHP Code:
<?php//perform security check is the real broadcaster//redirect to stratus?>
If I had my own stratus server, would I be able to do security checks before allowing broadcasting?
I'm using flash cs5.5 and usually when i make a text field, the text is cut off by the width of the text field unless i autosize it, but with TLFTextField, it just resizes itself without me telling it to. How do i set the TLFTextField so that the text stays within a certain width and crops everything past that width?
View 2 RepliesHow I can include the . in the restricted text field. I know how to restrict to only allow for numbers, letters etc... but what I need is to only allow numbers and the dot.
View 4 Repliesi've got a mask following the mouse and was wondering how i could restrict the code so the mask would only follow the mouse when it was in a certain portion of the scene.basically i've got it following the mouse for a menu navigation and want to know how to not have the mask following the mouse when it moves outside of that menu area.
View 14 RepliesHow would I restrict this variable:
Code:
this.mousePercent = _root.portfolio._xmouse/500;
so that it can't get below 0 or greater than 1?
I am trying to have the falling snow in this script [URL] appear behind a mask layer.
View 2 RepliesI've been trying to do this for awhile, and I've read the boards. I've seen a few options as to how to do this, but some of them do not explain how the css/js etc work, and I just don't understand that stuff enough to go it alone.
What I'm trying to do : Create a flash site that only 'downsizes' when the browser is too small to view it. I don't want it to upscale/upsize.
For example. The movie is 1000 x 800 . If a viewer has a viewable area that is less than 1000x800 the movie will scale [ the way it does when published at 100% ]. BUT if the viewer say has a 23' cinema screen, the movie will not get bigger than 1000x800.
We're planning on allowing others to embed our custom player swf (which play the projects we produce) on their site/blog/etc with embed code, but want to maintain enough control to blacklist certain sites that use our projects unfairly or in violation of our terms.What's the best way to block certain sites from embedding our swf? We had an idea of attaching a unique ID with each embed code and then having the player make a call to our site to check a list to see if that ID is blocked or not....but that's easy to bypass, and wouldn't it be easier to just dump the blocked sites into an .htaccess of httpd.conf file with some mod_rewrite trickery?
View 2 RepliesYou can restrict the number of users on a flash server applications using server-side scripting.Here is how.
1. Go to the flash server root/documentation/samples (Lets say its a live streaming aplication).
2. Copy the livestreams folder to your flash server root/applications and paste it inside the folder.
3. Open the main.asc file that is inside the folder you just pasted.
4. At the end of the code paste the following code:
[Code]...
I am facing one problem that i want to restrict my boundary while my object is moving around a area.So i want to move my black color ball only one position left/right/bottom or topEventhoung if my ball presents in the left side edgeit should move left side. same thing for upper side, bottom side and right side.right nowi m using Mouse Down for DragMouseUP for DropInbetween MouseMove for finding its co-ordinates
View 1 Repliesi have a question that is almost like other questions but with a small but very important difference. how can i restrict file types for user with a popup showed in the browser.
The standard file input of html can limit that with a command but it does not work in all browser so it is not an option. I do not want to validate the file extension after the user has chosen a file but before that, when he is choosing.[URL].. but it uploads the file after the user has chosen it, i do not want to do that, i want to upload it after the user submits the form.
So the problem looks like this that there are some ways of not letting the user send a not valid file but they are not good because, one is that i validate after the user have chosen the file and the other is that i upload the file before the user submits the form.
I just want a simple thing to not letting to "chose" a not valid file, it does not matter if it will be made with java script or flash, just let it work.