im outta it. The Flash files i created for a project are WAY WAY too slow in terms of time of reaction. I can
take seconds to simply show a rollOver state on a given mc. And very erratic behaving.
I did other projects before without any problem. Its slow local, on the server, standalone, in browser, well
I need to add a rollover effect to the disabled state of a Spark button. This way, users can rollover the button and know why the button is disabled.I think I would have to override ButtonBase's getCurrentSkinState. Is there anyway to test if a mouse cursor is over a disabled button?
View 1 Repliesi wnat to show the message "Hi how are u" as a rollover message or a tooltip when i rollover the hyperlink Know More
View 1 RepliesI want to rollover a button and have it trigger the rollover state of another button. The buttons overlap. The one on top is transparent and smaller than the bottom button. So far I think I have the AS3 to handle the rollover of the top button, but I don't know how to trigger the other button's rollover state.
[Code]....
I have an issue with an animated rollover/out state that I have created. I have seven movieclips that I am using as buttons and when rolled over/out play a different frame of the MC and move all the other mc's with an actionscript tween. The code works as it should but when I try to rollover/out of the mc to quickly the whole thing goes haywire and all the clips get out of place. I have tried to disable the buttons as soon as the user rollover on the mc but it doesn't seem to have any effect. I am only posting the code for one of the mc (publicist_btn) since all the code for the rest are the same.
[Code]...
I've been researching all day and it seems like this is impossible to do. I see you can setStyle on ComboBoxes/Lists & other components but... How do you control the style for a Roll Over state? I'm not looking to change colors but instead, turn underlining on and off during MOUSE_OVER and MOUSE_OUT, respectively
View 2 RepliesI've been using the following code for a set of buttons that activates/deactivates the buttons so there is only one active button at a time:
[Code]....
I found this code here: [URL] I've been messing with this code for a couple days now and can't seem to figure out how to add a rollover state to this code, everything I try either glitches this code out or doesn't work... So at the moment it does half of what I want (makes it where there's only one active button at a time), what I want to do is to add a Rollover effect to the code above.
I am trying to remove a rollover and rollout states from a button, AFTER the button has been pressed. I want to KEEP that button in its pressed state once pressed. How might I do this?
[Code]...
I need to know if it's possible to have an HTML rollOver state effect Flash. I want the user to rollOver an HTML button and when they do, the Flash movie below it plays.
View 3 RepliesI have a navigation menu with the following code on the buttons, this works fine, you press one button, loads an external swf in movie clip holder and then when i press another button on the navigation, it loads an external swf into holder replacing the the last swf. The buttons have an rollover animation and when pressed have a static state ie you know that the button you pressed doesnt animate and you know what page you are on.
I have a another movieclip on the main stage, inside this, there is a scroller with thumbnail buttons, same code on the thumbnail buttons but on the time line in the movieclip. This too loads external swf into the movie clip holder.BUT doesnt turn off the static state in the main navigation button, so for example if i am in the home page the home page button is on.I press the another button on the navigation, and the home page button goes off and the new button stays on with new page loaded.I would like the code in the scroller to turn off the navigation button last pressed, so the thumbnail buttons, act like they are part of the navigation and not inside a movie clip..
var buttonNum:Number = 1;
for (i=1; i<=buttonNum; i++) {
this["button"+i].onRollOver = function() {[code]...
You can see that there are simple roll overs for the header (this is the middle part with the photo on it and the buttons on the right); you rollOver one and the photo changes.Never one to leave well-enough alone, the boss wants to add this wrench to the works:He's not sure that people will "get" that you can hover over the buttons and will never get to see the photo and message change. So he wants the photo/message to kind of rotate through on a loop, then have it so you can override the rotation by rollingOver the button. Ok, no problem.BUT I would like the button's rollOver effect to be seen with the cooresponding photo/message. This is what I can't figure out, without trying something hacky.
View 2 RepliesSo I have a window that slides in when its rolled over. It goes back to its origin when the user rolls off the window. Now within that window I have a scroll feature taht creates a conflict with the window actions when the user tries to use the scrollbar elements. I want the window to stay open, while the user is scrolling and i want the window to close when the user rolls off the window.
It could be easier to have the user click the window open/closed...but I was wondering if there is a way I could keep my original vision...here is what i wrote for the window code:
[AS]window.backdimmer._alpha=0;
window.trigger.onRollOver = function() {
window.slideTo(-360, "_y", .4, "easeoutbounce");
[Code]....
Let's say I have a button called HOME, and in this button the word home is in HELVETICA FONT REGULAR STYLE. Now, Helvetica has lots of styles.Say I want the rollover state to be HELVETICA REGULAR. How can I do that with actionscript? My BTN instance name is "home", and my text field instance inside the btn is "home_txt".
and some general question: is it better just to create buttons for each category, or just create one general button, and reuse it giving a different instance name every time? Like, should the word HOME be a button, or should I add a rectangle button underneath it and change the instance name accordingly?
I would like to specify which page a user is on by having the button on the rollover state. For example, on the products page, I would like the products button to be in the rollover state. I can't figure out how I would do this. Below is the code from the as file.
package codesource
{
import flash.display.MovieClip;
import flash.events.Event;
[code].....
I'm in the process of building a Flash AS3 navigation for a client's website. The horizontal navigation has five main links, and a secondary navigation will drop down under three of them on rollover (this part isn't complete yet). The rollover and rollout states are animated: on rollover they gradually change color; on rollout they gradually change back to the original color.Well, I've finally gotten the code figured out (my first foray into AS3 after finally being comfortable with some things in AS2!). However, depending on how you move the mouse (i.e., if you move the mouse over the button too quickly), the rollover state remains on rollout and I can't figure out why. Can someone help? I also need to know how to designate an active state when the button is clicked (say, if you clicked on Projects, the Projects button would be highlighted (the rollover state) when you're on that page.The link to the in-progress navigation is located here: http:[url].... And this is the AS:
var homeLink:URLRequest = new URLRequest("../index.htm");
var mySound:Sound = new clickSound();
home_mc.buttonMode = true;[code]......
was wondering how you could make a rollover/rollout over an swf and change the image without reverting back to the original image. For instance, or more specifically,How would you create the effect where you have a permanent change on a mouserollover so that it does not go back to the original design? I made two movie clips and I put them together so that now when the mouse rollsover or you click on the original movie clip, the second movie clip is played, but the second movie clip gets cut off as soon as the mouse moves away and reverts to the original movie clip. I also wanted to stop the second movie clip from looping or replaying if clicked upon - just play once
View 1 RepliesCan you call a button rollover state from inside a another MC?
View 2 RepliesI'm trying to highlight the current 'page' / movieclip by showing the onrollover state in navigation display/button.So the colour remains the onrollover state (in this case blue) while the particular movie clip/'page' is displaying. Changing when the user rolls over another button.I have two issues:1. I understand I have to place the button within a movieclip and have been experimenting with button '02' in the attached example.fla - however now I have done this the original action contained within the movieclip instance myScreen_mc is no longer working.
View 3 Repliesi have a problem with a rollover animation stopping at it's 'on' state on release. i have a movie clip that fades text up from 0% at keyframe 1 to 100% at keyframe 10 and back down to 0% at keyframe 19. i have an invisible button above this with the following:
[Code]...
the visible bit is to turn off the invisible button on release. the problem is that with the following code, all that happens is the movie plays out from 11 on release. i want it to stop at keyframe 10 (where it is).
how you could make a rollover/rollout over an swf and change the image without reverting back to the original image. For instance, or more specifically,How would you create the effect where you have a permanent change on a mouserollover so that it does not go back to the original design? I made two movie clips and I put them together so that now when the mouse rollsover or you click on the original movie clip, the second movie clip is played, but the second movie clip gets cut off as soon as the mouse moves away and reverts to the original movie clip. I also wanted to stop the second movie clip from looping or replaying if clicked upon - just play once. Any suggestions? Here's the url to the flash file:[url]
View 1 RepliesI am using a ENTER_FRAME to destroy the rollover state of my button. I cannot use a MOUSE_OUT, because I have buttons on top. Is there a better way to do this?
Code:
package {
import flash.display.MovieClip;
import flash.events.MouseEvent;
import flash.events.*
import Tween
[Code] .....
i wrote many things (something like back functions) but i failed. my code and my swf is below.
Code:
stop();
import mx.transitions.Tween;
[code].....
I want to have a button with a rollover state that is different that the out state. I got that part, but I also want to keep the rollover state active if clicked. I can think of a couple ways to do it but I'm certain there is an easier way to do it. I have about 8 buttons and when I click on on I want that to stay in the rollover state, then when I click on another one I want the first to go back to the out state and the new one that I clicked to go to the over state and stay there.
View 3 RepliesWhat i need is a series of pictures on a row that is mouse sensitive, if you move the mouse the gallery move in a loop, (no stop!)[code]This works but i would like to have unblur the last button pressed.I did some tries but i'm not a good programmer...URL...
View 3 RepliesI'm making an interactive map of the U.S. The layer with the outlines of the U.S. states sits on top. It has to sit on top because otherwise the outlines don't show up above the color fills for each state. I want a popup balloon to appear when you roll over each U.S. state. However, when I turn a state, say, New York, into a button, the button layer sits below the outline layer. So when I create the popup box for the button's rollover state, the popup box is *under* the US state outlines. How can I make the button rollover state exist on the highest layer?
View 2 Repliesbelow is some code i am using to rewind / play an animaion depending on the rollover state. only ting is i would like to have it so that i could do something like:
playFrames(homeBtn)...
this way i can use the same function over and over but i am not sure how to write this. i think its someting like function playFrames(obj); and then you do something with this...
[Code]...
i am working on a flash project i want to make the clicked button stay on the rollover state in the movie
see the fla file, i am using flash 8 pro
i was thinking to make frame by frame but i have many many buttons
I'm using the code bellow to change the color of button on rollover and rollout. Tried to disable the button using mouseEnabled = false, but when rollout, the button changes color, instead of keeping it's rollover state.
Code:
stop();
import com.greensock.*;
import com.greensock.easing.*;
//leave button1 as clicked when starting the movie.
[code]....
in short, when a button is rollover, it has to change its tint to "blue", when rollout, change to "null", when clicked should remain in "blue state", and restore the previous clicked button to "null state color".
In AS2, I was able to create an rollover and rollout state that utilized the nextFrame() and prevFrame() commands. When hovering over the hit target, a specific movie clip would continuously advance to the next frame using an onEnterFrame command. Conversely, in a rollout state, the movieclip would play backwards until it reached the first frame.
I could specifically use some help with how to implement the onEnterFrame command so that the nextFrames and prevFrames constantly run.
[Code]...
I made a nav bar, and when you are over a button it has the "DOWN" state. Test it works, roll over and see down state. I put this nav bar (as a movie) call it NAVI, into the main movie. Test it works, roll over and see down state. Now, to NAVI I assign this code
[Code]...